Adj Micro Phase Handleiding
Adj
Niet gecategoriseerd
Micro Phase
Bekijk gratis de handleiding van Adj Micro Phase (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.4 sterren uit 1.5 reviews. Heb je een vraag over Adj Micro Phase of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
Unpacking: Every Micro Phase has been thoroughly tested and has
been shipped in perfect operating condition. Carefully check the ship-
ping carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your units for any
damage and be sure all accessories necessary to operate the system
have arrived intact. In the event damage has been found or parts are
missing, please contact our toll free customer support number for fur-
ther instructions. Please do not return the system to your dealer with-
out rst contacting customer support.
Introduction: Thank you for purchasing the Micro Phase by ADJ Prod-
ucts, LLC. This comes with bright 3 Watt LED to produce a xture a
spectacular moonower effect. This effect lls a room with dozens of
multi-colored razor sharp beams. The Micro Phase is a great effect
that can be used at parties, karaoke events, small bars and clubs, and
for home use.
Customer Support: ADJ Products, LLC provides a toll free customer
support line, to provide set up help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.adj.com for any comments or
suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacic Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2941
E-mail: support@adj.com
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may require service please
contact ADJ Products, LLC.
Please recycle the shipping carton whenever possible.
Micro Phase Introduction
ADJ Products, LLC - www.adj.com - Micro Phase User Manual Page 2
User Instructions
1/13
Micro Phase Operating Instructions
Micro Phase Warranty Registration
The one 365Micro Phase carries a year ( days) limited warranty.
Please ll out the enclosed warranty card to validate your purchase.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) num-
ber. The R.A. number must be clearly written on the outside of the
return package. A brief description of the problem as well as the R.A.
number must also be written down on a piece of paper and included
in the shipping container. If the unit is under warranty, you must pro-
vide a copy of your proof of purchase invoice. You may obtain a R.A.
number by contacting customer support at (800) 322-6337.
Micro Phase Features
• Includes Built-In Hanging Yoke
• Two Different Operating Modes
• Light Weight
• Futuristic Case Design
• Bright 3 Watt LED
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
Micro Phase General Instructions
ADJ Products, LLC - www.adj.com - Micro Phase User Manual Page 3 ADJ Products, LLC - www.adj.com - Micro Phase User Manual Page 4
Trouble Shooting: Listed below are a few common problems th you at
may encounter, with solutions.
No rotation;
1. Check to make sure the knob is turned to the correct position.
Micro Phase Trouble Shooting
General Operation:
This xture is designed to operate as a stand alone unit, there is no
need of a controller. There is no power switch, after plugging this
xture in, the units clear mirror dish will either rotate or remain static.
This xture features a light weight case design and a hanging bracket.
This xture is designed for mobile DJ’s, clubs, bands, roller rinks and
any arena that requires a compact, light weight, easy to use xture.
Use a fog machine or other type of special effect smoke to enhance
the beam intensity.
Operating Modes:
This unit comes with a located on the multi-operating knob rear of
the unit. controls ( ) different operating modes; Static, The knob two 2
and Continuous Rotation.
ADJ Products, LLC - www.adj.com - Micro Phase User Manual Page 5 ADJ Products, LLC - www.adj.com - Micro Phase User Manual Page 6
Micro Phase Warranty Micro Phase Notes
MANUFACTURER’S LIMITED WARRANTY
A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products
to be free of manufacturing defects in material and workmanship for a prescribed period from
the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the
product is purchased within the United States of America, including possessions and
territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable
evidence, at the time service is sought.
B. For warranty service you must obtain a Return Authorization number (RA#) before sending back
the product–please contact ADJ Products, LLC Service Department at 800-322-6337. Send the pro-
duct only to the ADJ Products, LLC factory. All shipping charges must be pre-paid. If the requested repairs
or service (including parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay
return shipping charges only to a designated point within the United States. If the entire instrument is
sent, it must be shipped in it’s original package. No accessories should be shipped with the product. If
any accessories are shipped with the product, ADJ Products, LLC shall have no liability whatsoever for
loss of or damage to any such accessories, nor for the safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if the product is modified in any
manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the
product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior
written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because
not properly maintained as set forth in the instruction manual.
D. This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check
up. During the period specified above, ADJ Products, LLC will replace defective parts at its expense
with new or refurbished parts, and will absorb all expenses for warranty service and repair labor by
reason of defects in material or workmanship. The sole responsibility of ADJ Products, LLC under this
warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole
discretion of ADJ Products, LLC. All products covered by this warranty were manufactured after August
15, 2012, and bear indentifying marks to that effect.
E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon it’s products
without any obligation to include these changes in any products theretofore manufactured.
No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with
products described above. Except to the extent prohibited by applicable law, all implied warranties made
by ADJ Products, LLC in connection with this product, including warranties of merchantability or fitness,
are limited in duration to the warranty period set forth above. And no warranties, whether expressed or
implied, including warranties of merchantability or fitness, shall apply to this product after said period
has expired. The consumer’s and/or Dealer’s sole remedy shall be such repair or replacement as is
expressly provided above; and under no circumstances shall ADJ Products, LLC be liable for any loss or
damage, direct or consequential, arising out of the use of, or inability to use, this product.
This warranty is the only written warranty applicable to ADJ Products, LLC Products and
supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore
published. This warranty was revised after December 1, 2012.
MANUFACTURER’S LIMITED WARRANTY PERIODS:
•LightingProducts=1-year(365days)LimitedWarranty(Such as: Special Effect Lighting, Intelligent
Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing,
Lighting Stands etc. excluding LED, Laser Products and lamps)
•LaserProducts=90-DayLimitedWarranty
•L.E.D.Products=3-year(1095days)LimitedWarranty(excluding motors, PCB boards, and power
supplies, which have a 1-year (365 day Limited Warranty) and batteries which have a 180 day
limited warranty). Only the L.E.D.s carry a 3-year warranty
Product specificaties
| Merk: | Adj |
| Categorie: | Niet gecategoriseerd |
| Model: | Micro Phase |
Heb je hulp nodig?
Als je hulp nodig hebt met Adj Micro Phase stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Adj
14 Augustus 2025
14 Augustus 2025
14 Augustus 2025
14 Augustus 2025
14 Augustus 2025
14 Augustus 2025
14 Augustus 2025
14 Augustus 2025
14 Augustus 2025
14 Augustus 2025
Handleiding Niet gecategoriseerd
- MSR
- Braun Phototechnik
- Furuno
- ChyTV
- Aicon
- Mooer
- Blue
- Rindor
- WilTec
- OutNowTech
- Lego
- Tesseract Modular
- Maxxter
- LUCIDA
- Singercon
Nieuwste handleidingen voor Niet gecategoriseerd
14 Augustus 2025
14 Augustus 2025
14 Augustus 2025
14 Augustus 2025
14 Augustus 2025
14 Augustus 2025
14 Augustus 2025
14 Augustus 2025
14 Augustus 2025
14 Augustus 2025