ADATA XPG Spectrix S40G Handleiding

ADATA Solid state drives (ssd) XPG Spectrix S40G

Lees hieronder de 📖 handleiding in het Nederlandse voor ADATA XPG Spectrix S40G (9 pagina's) in de categorie Solid state drives (ssd). Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9

www.xpg.com

XPG RGB Soware Instrucon

1. Proles

 Area 1: There are four proles for you to customize. Select the prole,

customize , and click “Apply” to save the prole sengsit .

 Area 2: Clicking on the “Reset button will revert the prole back to its ”

default setngs.

 Area Click “Apply to save your customized prole setngs. 3: ”

2. Lighng Effect Stac─

 Area 1: Click on the desired LED LED 1 to LED 8”) to be adjusted. To sync (“

all the LEDs with “LED 1” click “Sync to LED 1.”

 Area 2: Adjust colors as follows:

www.xpg.com

① Click on the desired color on the color ring (or drag the white knob

onto the desired color).

② Input the RGB values directly (or drag the white knobs corresponding

to R, G, B, S). S is color saturaon.

③ Input HEX v ue directly al

 Area 3: Five preset colors

Area 4: LED On/Off switch

Area 5: Brightness adjustment

Aer achieving the desired sengs, click “Apply to save.”

3. Lighng Effect Breathing ─

 Area 1: Click on the desired LED LED 1 to LED 8”) to be adjusted. To sync (“

all the LEDs with “LED 1” click “Sync to LED 1.”

 Area 2: Adjust colors as follows:

① Click on the desired color on the color ring (or drag the white knob

onto the desired color).

② Input the RGB values directly (or drag the white knobs corresponding

to R, G, B, S). S is color saturaon.

③ Input HEX value directly

 Area 3: Five preset colors

Area 4: LED On/Off switch

Area 5: Brightness adjustment

Area 6: Light effect speed adjustment. To speed up adjust the knob to the

le and vice versa to slow down.

Aer achieving the desired sengs, click “Apply to save.”

www.xpg.com

4. Lighng Eect Strobing ─

 Area 1: Click on the desired LED LED 1 to LED 8”) to be adjusted. To sync (“

all the LEDs with “LED 1” click “Sync to LED 1.”

 Area 2: Adjust colors as follows:

① Click on the desired color on the color ring (or drag the white knob

onto the desired color).

② Input the RGB values directly (or drag the white knobs corresponding

to R, G, B, S). S is color saturaon.

③ Input HEX value directly

 Area 3: Five preset colors

Area 4: LED On/Off switch

Area 5: Brightness adjustment

Area 6: Light eect speed adjustment. To speed up adjust the knob to the

le and vice versa to slow down.

Aer achieving the desired sengs, click “Apply to save.”

5. Lighng Eect Cycle─

Product specificaties

Merk:	ADATA
Categorie:	Solid state drives (ssd)
Model:	XPG Spectrix S40G
Kleur van het product:	Meerkleurig
Gewicht:	13.4 g
Breedte:	80 mm
Diepte:	22 mm
Hoogte:	8 mm
Certificering:	CE, FCC, BSMI, VCCI, KC
Interface:	PCI Express 3.0
Duurzaamheidscertificaten:	RoHS
Ondersteunde beveiligingsalgoritmen:	256-bit AES
Temperatuur bij opslag:	-40 - 85 °C
SSD capaciteit:	2000 GB
ECC:	Ja
SSD-vormfactor:	M.2
Mean time between failures (MTBF):	2000000 uur
Slaapstand:	0.14 W
Type geheugen:	3D TLC NAND
Vermogensverbruik (avg):	0.33 W
Leessnelheid:	3500 MB/s
Schrijfsnelheid:	1900 MB/s
Component voor:	PC
Schokbestendigheid:	1500 G
Bedrijfstemperatuur (T-T):	0 - 70 °C
Merkspecifieke technologieën:	SLC Caching
Code geharmoniseerd systeem (HS):	84717070
Hardware encryptie:	Ja
NVMe:	Ja
NVMe versie:	1.3
Random read (4KB):	290000 IOPS
Random write (4KB):	240000 IOPS
PCI Express interface data lanes:	x4
TBW-classificatie:	1280
Sequentiële leessnelheid (ATTO):	3500 MB/s
Sequentiële schrijfsnelheid (ATTO):	1900 MB/s
Lage dichtheid pariteitscontrole (LDPC):	Ja
Sequentiële leessnelheid (AS SSD):	2950 MB/s
Sequentiële schrijfsnelheid (AS SSD):	1600 MB/s
Sequentiële leessnelheid (CDM):	3500 MB/s
Sequentiële schrijfsnelheid (CDM):	3000 MB/s