ADATA Ultimate SU630 Handleiding

ADATA Solid state drives (ssd) Ultimate SU630

Lees hieronder de 📖 handleiding in het Nederlandse voor ADATA Ultimate SU630 (4 pagina's) in de categorie Solid state drives (ssd). Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

INSTALLING

AN 2.5" SATA SSD

ON A DESKTOP PC

1. GATHER THE THINGS YOU'LL

NEED

*Please use a standard Phillips screwdriver (3.5mm) for

disassembling the case.

PC, Phillips screwdriver, and ADATA 2.5" SATA

SSD

2. BACK UP YOUR DATA

Make sure to backup the important data on your

PC to an external device, such as an external

HDD, before starting installation.

3. POWER OFF YOUR PC

After backing up your data, power off your PC

to avoid data loss or damage to other

components during installation.

4. SWITCH OFF THE POWER SWITCH

AND UNPLUG POWER CORD

This action is necessary to discharge residual

power that can damage your PC and its

components.

BEFORE INSTALLATION

*Please check the side of the motherboard to find the

unused 2.5" bracket

*Each PC has different ways to fix drives. There may be

drawers or brackets to place the solid state hard drives.

The way to remove them will involve pulling out the

bracket or support frame.

**When removing the stand, please check the screws on

the top or side carefully, these screws may be fixed on it.

*The slot has a foolproof design. Please insert the SSD

in the direction corresponding to the pins on the solid

state drive and the slot.. Do not insert it forcibly to avoid

damage to the product.

Use the standard Philips screwdriver to remove

the screws and then remove the PC case

2. CONFIRM THE POSITION OF THE

2.5" SLOT AND REMOVE THE

BRACKET

3. REMOVE THE BRACKET AND

CABLE

4. CONNECT CABLES AND ATTACH

BRACKET TO THE NEW 2.5" SATA

SSD. PUT THE BRACKET IN THE

SLOT TO FIX DRIVES

There is a row of pins on the cable as well as on

the SSD. Align to the correct orientation and

place the bracket back into the slot.

1. REMOVE THE PC CASE

INSTALLATION

Product specificaties

Merk:	ADATA
Categorie:	Solid state drives (ssd)
Model:	Ultimate SU630
Gewicht:	47.5 g
Breedte:	69.85 mm
Diepte:	100.45 mm
Hoogte:	7 mm
Certificering:	CE, FCC, BSMI, VCCI, KC
Interface:	SATA III
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-40 - 85 °C
SSD capaciteit:	3840 GB
ECC:	Ja
SSD-vormfactor:	2.5"
Mean time between failures (MTBF):	1500000 uur
Type geheugen:	QLC 3D NAND
Leessnelheid:	520 MB/s
Schrijfsnelheid:	450 MB/s
Component voor:	PC
Overdrachtssnelheid:	6 Gbit/s
Schokbestendigheid:	1500 G
Bedrijfstemperatuur (T-T):	0 - 70 °C
Hardware encryptie:	Nee
S.M.A.R.T. support:	Ja
NVMe:	Nee
Random read (4KB):	40000 IOPS
Random write (4KB):	65000 IOPS
TRIM support:	Ja
TBW-classificatie:	800