Zmodo ZS-2004-1TB Handleiding

Bekijk gratis de handleiding van Zmodo ZS-2004-1TB (8 pagina’s), behorend tot de categorie Bewakingscamera. Deze gids werd als nuttig beoordeeld door 15 mensen en kreeg gemiddeld 4.9 sterren uit 9 reviews. Heb je een vraag over Zmodo ZS-2004-1TB of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Make sure that your NVR is powered off and unplugged from the power

source. Using a screwdriver, remove the four screws located on the

bottom panel as shown below.

2

Hard Drive Disk Installation

If your system does not include a pre-installed hard drive (HDD), you can

purchase your own and follow the steps below for installation. Make sure

that you purchase a 3.5" HDD optimized for always-on read/write

surveillance, e.g. HDD.low-powered WD10PURX

1

1

Getting to know your Business Security

System

The Zmodo Business Security System provides a full-featured monitoring

solution to cover your entire business space. The business system includes an

NVR for local storage, HD cameras with cloud storage options, and sPoE

Repeaters to connect the cameras. The sPoE repeater allows you to run one

cable from your router to power on multiple cameras in each zone of your

business. It will also allow for longer cable runs from your NVR.

Network Requirements:

720p cameras: Requires at least 1mbps upload when live viewing or 2mbps

upload when using the Cloud Service for each camera.

1080p cameras: Requires at least 2mbps upload when live viewing or 4mbps

upload when using the Cloud Service for each camera.

In order to optimize bandwidth and the number of ports on your WiFi router,

you may use a network switch, however your sPoE Repeater(s) and NVR must

be connected to the same network.

Smart Business Security System

Quick Start Guide

1

Product specificaties