Zempire Vader Handleiding

Bekijk gratis de handleiding van Zempire Vader (4 pagina’s), behorend tot de categorie Tent. Deze gids werd als nuttig beoordeeld door 55 mensen en kreeg gemiddeld 4.3 sterren uit 4 reviews. Heb je een vraag over Zempire Vader of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PITCHING INSTRUCTIONS - VADER

5.Peg out the four corners of

the inner tent. The peg points

should be pegged through

the webbing loop rather than

the eyelet.

2x

2x

4.Insert the end of each of the short

BLACK poles into the eyelets

above the door and the rear

window. Attach the C clips obove

the side window.

7. Attached the base of the fly by

connecting the SR buckles at

each corner of the tent. Peg the

remaining elastic peg loops.

8. It is recommended that guy

ropes are pegged out at all

times and windows are opened

whenever possible to allow

adequate ventilation.

Insert pegs at a 45o angle

3. Thread the RED poles through the

pole sleeves that run diagonally

across the centre of the tent. Insert

the ends of the poles into the eyelets

located below each pole sleeve.

1.Clear your site making sure there are no

sharp objects where you are going to

pitch your tent. Try to get a site that is as

flat as possible. Spread out the inner tent,

the round door is located at the front.

2. Assemble the 4 pole sections.

Ensure that the poles do not

snap together.

6.Pull the fly over the inner tent.

The Freedom Logo should be at the

front of the tent. Connect the

velcro loops inside the fly around

the cut outs on the corresponding

pole sleeve.

Product specificaties