Zempire Tempa Handleiding

Bekijk gratis de handleiding van Zempire Tempa (4 pagina’s), behorend tot de categorie Tent. Deze gids werd als nuttig beoordeeld door 62 mensen en kreeg gemiddeld 5.0 sterren uit 2 reviews. Heb je een vraag over Zempire Tempa of wil je andere gebruikers van dit product iets vragen? Stel een vraag

8.Peg out all the guy ropes.

Try to have guy ropes at a

45o angle to the ground.

5.Firstly peg our the 4 corners of

the centre of the tent( ). Then peg

out the remaining peg points( ).

Try to get the floor sitting as flat as

possible at each stage.

1.Clear your site making sure there are no

sharp objects where you are going to

pitch your tent. Try to get a site that is

as flat as possible.

2.Assemble the 4 pole sections.

Ensure that the poles are inserted

fully in tho the steel connectors.

3.Thread the RED poles through

the pole sleeves that run diagonally

across the centre of the tent. Tension

the poles inserting the pins located

directly underneath each pole

sleeve into the ends of the poles.

Attach the C Clips to the poles.

These are located below

each pole sleeve.

4.Thread the BLUE poles through

the pole sleeves on either side of the

centre dome. Insert the pins into the

pole ends. Attach the C Clips to the

poles.

7.Pull the fly over the tent

and connect the SR buckle sewn

onto the fins at either side. Attach

the hooks onto the loops sewn

around the pole sleeves.

PITCHING INSTRUCTIONS - TEMPAairflowseries

6.Firmly peg out the ORANGE

anchor Webbing attached

to the large fin at the rear of the

tent. Also peg out lower vents at

this stage.

2x

2x

Product specificaties