Zebra ZM600 Handleiding

Zebra Printer ZM600

Lees hieronder de đź“– handleiding in het Nederlandse voor Zebra ZM600 (146 pagina's) in de categorie Printer. Deze handleiding was nuttig voor 99 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/146
© 2007 ZIH Corp. The copyrights in this manual and the software and/or firmware in the label printer
described therein are owned by ZIH Corp. Unauthorized reproduction of this manual or the software and/or
firmware in the label printer may result in imprisonment of up to one year and fines of up to $10,000
(17 U.S.C.506). Copyright violators may be subject to civil liability.
This product may contain ZPL®, ZPL II®, and ZebraLink™ programs; Element Energy Equalizer
® Circuit;
E3®; and Monotype Imaging fonts. Software © ZIH Corp. All rights reserved worldwide.
ZebraLink and all product names and numbers are trademarks, and Zebra, the Zebra logo, ZPL, ZPL II, Element
Energy Equalizer Circuit, and E3 Circuit are registered trademarks of ZIH Corp. All rights reserved worldwide.
All other brand names, product names, or trademarks belong to their respective holders. For additional
trademark information, please see “Trademarks” on the product CD.
Proprietary Statement This manual contains proprietary information of Zebra Technologies Corporation
and its subsidiaries (“Zebra Technologies”). It is intended solely for the information and use of parties operating
and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or
disclosed to any other parties for any other purpose without the express, written permission of Zebra
Technologies Corporation.
Product Improvements Continuous improvement of products is a policy of Zebra Technologies
Corporation. All specifications and designs are subject to change without notice.
Liability Disclaimer Zebra Technologies Corporation takes steps to ensure that its published Engineering
specifications and manuals are correct; however, errors do occur. Zebra Technologies Corporation reserves the
right to correct any such errors and disclaims liability resulting therefrom.
Limitation of Liability In no event shall Zebra Technologies Corporation or anyone else involved in the
creation, production, or delivery of the accompanying product (including hardware and software) be liable for
any damages whatsoever (including, without limitation, consequential damages including loss of business
profits, business interruption, or loss of business information) arising out of the use of, the results of use of, or
inability to use such product, even if Zebra Technologies Corporation has been advised of the possibility of such
damages. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you.
Part Number: 79695L-001 Rev. A
iii
Declaration of Conformity
3/27/07 ZM400/ZM600 User Guide 79695L-001 Rev. A
Declaration of Conformity
I have determined that the Zebra printers identified as the
ZM™ Series
Z4M, Z6M, Z4M , R4Mplus, Z6Mplus plus, ZM400, ZM600
manufactured by:
Zebra Technologies Corporation
333 Corporate Woods Parkway
Vernon Hills, Illinois 60061-3109 U.S.A.
Have been shown to comply with the applicable technical standards of the FCC
For Home, Office, Commercial, and Industrial use
If no unauthorized change is made in the equipment,
and if the equipment is properly maintained and operated.


Product specificaties

Merk: Zebra
Categorie: Printer
Model: ZM600
Kleur van het product: Black, Grey
Gewicht: 15000 g
Breedte: 278 mm
Diepte: 475 mm
Hoogte: 338 mm
Stroomvoorziening: 100-240VAC, 50-60Hz
Intern geheugen: 16 MB
Meegeleverde software: - ZebraDesigner Pro\n- ZebraDesigner for XML\n- ZebraNet Bridge Enterprise\n- ZebraNet Utilities v 7.0\n- Zebra Universal Driver\n- ZBI-Developer\n- Additional scalable and bitmapped fonts available
Printsnelheid: 10 lpm
Printtechnologie: Direct thermisch
Standaard interfaces: USB 2.0
Netwerkgereed: Ja
Afmetingen (B x D x H): 278 x 475 x 338 mm
PC connected: Ja
Printsnelheid (metrisch): 254 mm/sec
Maximale label breedte: 178 mm
Maximale label lengte: 0.991 m

Heb je hulp nodig?

Als je hulp nodig hebt met Zebra ZM600 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Printer Zebra

Handleiding Printer

Nieuwste handleidingen voor Printer