Zebra MZ 220 Handleiding
Bekijk gratis de handleiding van Zebra MZ 220 (23 pagina’s), behorend tot de categorie Printer. Deze gids werd als nuttig beoordeeld door 32 mensen en kreeg gemiddeld 4.3 sterren uit 16.5 reviews. Heb je een vraag over Zebra MZ 220 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/23

MZ™Series
Quick Start Guide
1
Introduction
Thank you for choosing one of our Zebra
MZ™Series Mobile Printers. These rugged
printers will become productive and efficient additions to
your workplace thanks to their innovative design. Because
they are made by Zebra Technologies you can be assured
of world-class support for all of your bar code printers, soft-
ware, and supplies.
This document provides an easy reference for operating and
maintaining the MZ Series of Mobile Printers.
Complete and current documentation for each model printer
is provided by the available on the MZ Series User Guide
Internet at: www.zebra.com/manuals.
Always refer to the Important Safety Information data
sheet shipped with each printer and the Technical
Bulletin shipped with each battery pack. These
documents detail procedures to ensure maximum
reliability and safety while using this printer.
© ZIH Corp 2008
QSG-MZS-007 Rev. A
MZ Series Overview
(MZ 220 Illustrated)
MZ 220 MZ 320
Media width:
2.0 in. (50.8 mm)
Media width:
3.0 in. (76.2 mm
L: 5.34 in. [135.6 mm]
W: 3.18 in. [80.7 mm]
H:2.47 in. [62.7 mm]*
*w/ belt clip
L: 5.34 in. [135.6 mm]
W: 4.11 in.[104.4 mm]
H: 2.47 in. [62.7 mm]*
*w/ belt clip
Introduction
Getting Started
Using the
Printer
Troubleshooting
Accessories
Contact Us
1. Feed Switch
2. Media Status Light
3. USB Port
4. Battery Charging Receptacle
5. Media/Black Bar Sensor
6. Media Cover
7. Platen
8. Printhead
9. Latch Release Button
10. Communications Status Indicator
11. IR window
12. Charge Status Indicator
13. Power Switch
14. Power Indicator
15. Belt Clip
16. Battery Door Latch
17. Battery Compartment Cover
18. Battery Pack
19. External Charge Contacts
15
16
7
1
2
4
6
38
18
17
9
10
11
12
13
14
19
5


2
MZ™ Series
Quick Start Guide
Installing the Battery
Batteries are shipped uncharged. Remove any
protective packaging from a new battery pack, install it
in the printer and charge completely prior to initial use.
Section Continues
Removing the Battery
1. Use a coin to
rotate the Battery
Compartment lock 1/4
turn as shown.
2. Remove the Battery
Compartment Cover
Always release the locking barb before unplugging the
battery connector. Do not attempt to remove the connector
by force, or by using pliers, etc. as this could cause damage
to the printer’s CPU assembly.
Introduction
Getting Started
Using the
Printer
Troubleshooting
Accessories
Contact Us
1. Use a coin to
rotate the Battery
Compartment lock 1/4
turn as shown.
2. Remove the Battery
Compartment Cover
3. Plug the Battery
Pack connector into
the Printer.
Battery Pack
Note location of label
4. Re-install the Battery Com-
partment Cover and rotate
the lock back 1/4 turn to lock it
in place .
Ensure battery leads are not pinched prior to replacing
battery cover.
Battery Pack Connector
Squeeze lock to release.
Allow old battery pack to
drop out of the printer
Product specificaties
Merk: | Zebra |
Categorie: | Printer |
Model: | MZ 220 |
Gewicht: | 320 g |
Kleur: | Nee |
Capaciteit van de accu/batterij: | 1500 mAh |
Connectiviteitstechnologie: | Bedraad en draadloos |
Certificering: | -FCC Part 15 & EN55022 Class B,\n-FCC, ICS,\n-CSA & IEC 60950,\n-NOM,\n-C-tick,\n-VCCI,\n-S-Mark. |
Intern geheugen: | 8 MB |
Temperatuur bij opslag: | -20 - 60 °C |
Luchtvochtigheid bij opslag: | 10 - 90 procent |
Flash memory: | 4 MB |
Maximale resolutie: | 203 x 203 DPI |
Mediadikte: | 0.0508 - 0.1016 mm |
Maximum roll diameter: | 47.8 mm |
Gewicht (imperiaal): | 0.7 lbs |
Printtechnologie: | Direct thermisch |
Standaard interfaces: | USB 2.0,IrDA |
Paginabeschrijving talen: | CPCL-native |
Afmetingen (B x D x H): | 80.8 x 57.4 x 135.6 mm |
Ingebouwde streepjescodes: | Code 39,Code 93,PDF417,Postnet,QR Code,UPC-A,UPC-E |
Bedrijfstemperatuur (T-T): | -10 - 50 °C |
Relatieve vochtigheid in bedrijf (V-V): | 10 - 90 procent |
Batterijtechnologie: | Lithium-Ion (Li-Ion) |
Core diameter: | 19 mm |
Temperatuurbereik voor opslag (T-T): | 4 - 140 °F |
Heb je hulp nodig?
Als je hulp nodig hebt met Zebra MZ 220 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Printer Zebra
16 November 2024
6 Augustus 2024
23 Augustus 2023
23 Augustus 2023
21 Juni 2023
6 Juni 2023
21 Mei 2023
13 Mei 2023
4 Mei 2023
4 Mei 2023
Handleiding Printer
- Pantum
- Renkforce
- Primera
- Sawgrass
- Phoenix Contact
- Posiflex
- Microboards
- Xiaomi
- Fargo
- MSI
- EC Line
- Lexmark
- Triumph-Adler
- Samsung
- LG
Nieuwste handleidingen voor Printer
15 Juni 2025
15 Juni 2025
12 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025