Zagg Flex Arc Handleiding

Zagg Hoofdtelefoon Flex Arc

Lees hieronder de 📖 handleiding in het Nederlandse voor Zagg Flex Arc (18 pagina's) in de categorie Hoofdtelefoon. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/18

Instructions

Flex Arc

Wireless

*WARRANTY REGISTRATION

Your ZAGG Flex Arc™ comes with a one-year manufacturer’s warranty. In order to

activate the warranty, you must register your Flex Arc as well as keep your purchase

receipt. If you purchased your Flex Arc from ZAGG.com, ZAGG has already registered it

and has a copy of your proof of purchase.

Need more help? Please see our FAQ section at www.ZAGG.com/faq.

INTRODUCTION

Welcome to the latest advancement in personal audio technology. You are about

to experience the Flex Arc’s amazing sound and simple versatility. You’ll see

that you can wear it anywhere and enjoy your music, calls, and movies privately

through the earbuds, or switch to the external speakers when you still need to

hear what’s going on around you. No matter how you use it, the Flex Arc is the

perfect accessory for your busy life. Keep these instructions for future reference.

Note: All left and right instructions are given as though the Flex Arc was sitting

around your neck.

POWER AND PAIRING

Your Flex Arc automatically begins searching for devices to pair with when you

turn it on; however, you can manually control its pairing as well. Here’s how to

power it up and get it paired:

1. To turn your Flex Arc on, press and hold the Power button for three

seconds. The ﬁrst time you power on and pair it, you will need to hold

the Power button down for ﬁve seconds. Your Flex Arc will sound a

power up tone and vibrate to indicate it is powered on.

2. The LED, located on the left side by the Power button, will begin

ﬂashing red and blue indicating your Flex Arc is on and in pairing

mode. Access your device’s Bluetooth® settings and ensure Bluetooth

is turned on.

3. Select “ZAGG Flex Arc” from your device’s list of available Bluetooth

devices. Complete any additional pairing steps based on your device.

The LED will ﬂash blue every ﬁve seconds while your Flex Arc is on and

connected.

4. Press and hold the Power button for three seconds to turn your Flex

Arc o. When it powers o, it will vibrate twice and you will hear a

power down tone; the LED will also ﬂash red until it is powered o.

Power/Pair/

Change modes

Retract

left earbud

Play/Pause

Volume down/

Track back

Volume up/

Track forward

Retract

right earbud

Product specificaties

Merk:	Zagg
Categorie:	Hoofdtelefoon
Model:	Flex Arc
Kleur van het product:	Rood
Snoerlengte:	1.2 m
Connectiviteitstechnologie:	Bedraad
Draagwijze:	oorhaak
Headset type:	Stereofonisch
Impedantie:	32 Ohm
Positie speakers koptelefoon:	Intraauraal
Intra-aural type koptelefoon:	In-ear monitoren
Frequentiebereik koptelefoon:	20 - 20000 Hz
3,5mm-connector:	Ja
Gevoeligheid koptelefoon:	110 dB
Bedieningstoetsen:	Track <, Track >
Diameter van de luidspreker:	10 mm
Soort magneet:	Neodymium
Meegeleverde Headset connectors:	3.5mm stereo
Type product:	Headset
Aantal producten inbegrepen:	1 stuk(s)