Yard Force YF8000 Handleiding
Yard Force
Hakselaar
YF8000
Lees hieronder de đ handleiding in het Nederlandse voor Yard Force YF8000 (15 pagina's) in de categorie Hakselaar. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/15
OPERATING MANUAL
Model YF8000
ELECTRIC LEAF SHREDDER
Our Customer Service staff is ready to provide assistance. In the case of a damaged
or missing part, most replacement parts ship from our facility.
For immediate help with assembly, or for additional product information,
call 866-902-9690
vist www.YardForceUSA.com or
email support@YardForceUSA.com
You will need this manual for safety instructions, operating procedures, and
Warranty. The original sales invoice is Warranty. The original sales invoice is required
for warranty service.
QUESTIONS?
SAVE THIS MANUAL FOR REFERENCE
1
TABLE OF CONTENTS
Important safety instructions 1
Electrical requirements 4
Safety symbols 6
Know your electric leaf shredder 7
Assembly 8
Operation 12
Maintenance 14
Storage 15
Technical data 16
Warranty 17
Please read all of the safety precautions before operating this machine.
Warning
Could cause injury or death if not followed
CaUTiOn
Could damage machine if not followed
CaUTiOn
Before using this electric tool, carefully read and observe the safety
rules and instructions listed below. Before starting work make sure ,
that you know how to stop the machine in case of an emergency.
The incorrect use of this machine could cause serious injury. Keep
these instructions in a safe place and on hand so that they can be
consulted when required.
Warning
Read all safety warnings and all instructions. Failure to follow all
warnings and instructions may result in electric shock, ďŹre or serious
injury.
YF8000 Operating Manual
IMpORTANT SAFETY INSTRUCTIONS
3
IMpORTANT SAFETY INSTRUCTIONS
15. When feeding material into the leaf shredder, be extremely careful that pieces of
metal, rocks, bottles, cans or other foreign objects are not included.
16. Do not force material into the leaf shredder. It will do the job better and with less
likelihood of a risk of injury when used at the rate for which it was designed.
17. If the cutting mechanism strikes a foreign object or if your shredder should start
making an unusual noise or vibration, immediately switch it off, wait until the shredder
has come to a complete stop, then disconnect the power cord and take the following
steps:
A. Remove any foreign or clogged material.
B. Check for any loose parts and tighten to assure continued safe operation.
C. Replace or repair any damaged parts.
18. Avoid unintentional starting. Be sure switch is off when plugging in the shredder.
19. Always use safety glasses. Wear face or dust mask if operation is dusty.
20. Check discharge area periodically after stopping shredder to assure the processed
material does not build up and clog motor cooling vents.
21. Do not overreach â keep proper footing and balance at all times.
22. Do not move shredder when motor is running or with înger on the switch.
23. Maintain leaf shredder with care â follow instructions for replacing cutting lines and
for cleaning air îlter. Inspect shredder power cord periodically, and if damaged, have
it repaired by an authorized service facility. Keep handles dry, clean, and free from oil
and grease.
24. Check damaged parts â before further use of the shredder, any part that is damaged
should be carefully checked to determine that it will operate properly and perform
its intended function. Check for alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other condition that may affect its operation.
A guard or other part that is damaged should be properly repaired or replaced by an
authorized service center unless indicated elsewhere in this manual.
Product specificaties
| Merk: | Yard Force |
| Categorie: | Hakselaar |
| Model: | YF8000 |
Heb je hulp nodig?
Als je hulp nodig hebt met Yard Force YF8000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Hakselaar Yard Force
8 April 2023
Handleiding Hakselaar
- Hakselaar Bosch
- Hakselaar Tefal
- Hakselaar WOLF-Garten
- Hakselaar Al-ko
- Hakselaar Ambiano
- Hakselaar Arcelik
- Hakselaar Ariete
- Hakselaar Atika
- Hakselaar Black Decker
- Hakselaar Budget
- Hakselaar Duronic
- Hakselaar Einhell
- Hakselaar Elektra Beckum
- Hakselaar Eliet
- Hakselaar Emerio
- Hakselaar Eurom
- Hakselaar Ferm
- Hakselaar Florabest
- Hakselaar Flymo
- Hakselaar G3 Ferrari
- Hakselaar Gardena
- Hakselaar Gardenline
- Hakselaar Gardol
- Hakselaar Global
- Hakselaar Gorenje
- Hakselaar Greatbull
- Hakselaar Grizzly
- Hakselaar Gude
- Hakselaar Innoliving
- Hakselaar Kibani
- Hakselaar Korona
- Hakselaar Livoo
- Hakselaar Lumag
- Hakselaar Makita
- Hakselaar MTD
- Hakselaar Parkside
- Hakselaar Powerplus
- Hakselaar Rommelsbacher
- Hakselaar Silvercrest
- Hakselaar Skil
- Hakselaar Solo
- Hakselaar Stiga
- Hakselaar Topcraft
- Hakselaar Tristar
- Hakselaar Viking
- Hakselaar Vonroc
- Hakselaar Westinghouse
- Hakselaar OKAY
- Hakselaar Ozito
- Hakselaar Black And Decker
- Hakselaar ECG
- Hakselaar Heinner
- Hakselaar Izzy
- Hakselaar Orbegozo
- Hakselaar Sinbo
- Hakselaar Draper
- Hakselaar Meec Tools
- Hakselaar Kunft
- Hakselaar Comfee
- Hakselaar Cotech
- Hakselaar Power Craft
- Hakselaar Fieldmann
- Hakselaar McGregor
- Hakselaar Ardes
- Hakselaar Cramer
- Hakselaar Herkules
- Hakselaar Wallenstein
- Hakselaar Caravaggi
- Hakselaar IKRA
- Hakselaar Challenge Xtreme
- Hakselaar AIKEN
- Hakselaar WestBend
- Hakselaar Inno-Hit
- Hakselaar Ergotools Pattfield
Nieuwste handleidingen voor Hakselaar
18 Maart 2024
16 Maart 2024
16 Maart 2024
16 Maart 2024
16 Maart 2024
16 Maart 2024
20 Februari 2024
12 Januari 2024
5 Januari 2024
5 Januari 2024