WyreStorm NHD-200-TX Handleiding

WyreStorm Digitale decoder NHD-200-TX

Lees hieronder de 📖 handleiding in het Nederlandse voor WyreStorm NHD-200-TX (4 pagina's) in de categorie Digitale decoder. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

Wyrestorm NetworkHD™ 200-Series HD Over IP

Encoder and Decoders for video wall

NHD-200 Series

WyreStorm® NetworkHD 200 is our agship H.264 HD over IP distribution platform. With its simple system conguration and

powerful video wall functionality it is the best all round solution for commercial AV installs. Enabling the distribution of multiple

video formats over a dedicated IP network switch for commercial AV applications.

NetworkHD 200 series facilitates the transmission of an HDMI, DVI, Component & VGA signals (including Full HD 1080p video with

2.1 audio) to any number of HDMI displays over standard Ethernet (Cat5e/6) infrastructure. The NHD-200-RX enables the display

of a single image on a display whilst the NHD-210-RX decoder adds video wall playback to the system.

WYRESTORM PRODUCT SPECIFICATION SHEET

• Highly scalable, visually lossless HD over IP solution using the most ecient compression

technology to allow for very large commercial AV deployments

• Powerful video wall functionality (NHD-210-RX only) up to 4 x 4 displays.

• Multi-format DVI-I input selectable to HDMI, DVI, Component, VGA & Composite input

• Plug and Play setup with automatic networking conguration and auto discovery of components

• Quick SyncTM technology for virtually instantaneous, seamless switching

• CEC One-Touch Play & Standby or RS232 control of connected displays

Key Features:

Additional Features & Benefits:

• Supports video previewing on a PC or third party device.

NetworkHD 100 outputs simultaneous IP streams. One full

resolution for the NHD-100-RX. The other small one supports

resolutions of 352 x 288 @ 5Hz to easily preview a video from

the encoder on a PC or Mac

• Use with the new NHD-000-CTL controller for simple

conguration and control via the LAN, as well as for allowing

control from third party control system such as AMX, Crestron,

Control4, RTI & WyreStormTM Enado.

• Supports PoE to enable remote powering from POE network

switches, eliminating the need for a nearby power outlet

• Full PC control suite available free of charge at wyrestorm.com

• Supports HDCP

• Audio Breakout on both Encoder & Decoder

• Congurable encoding bit rate up to 40 Mbps

NHD-000-CTL

1 x NHD-000-CTL Main Unit

1 x Power Adapter (12V 1A DC)

1 x Phoenix Conn.

(Male, 3.5 mm, 3 pins)

2 x Mounting Brackets

5 x IP labels

NHD-200-TX

1 x NHD-200-TX Main Unit

1 x Power Adapter (12V 1A DC)

1 x Detachable Plug

1 x HDMI to DVI Converter

2 x Phoenix Conn.

(Male, 3.5 mm, 3 pins)

2 x Mounting Brackets

NHD-200-RX

1 x NHD-200-RX Main Unit

1 x Power Adapter (12V 1A DC)

1 x Detachable Plug

3 x Phoenix Conn.

(Male, 3.5 mm, 3 pins)

2 x Mounting Brackets

NHD-210-RX

1 x NHD-210-RX Main Unit

1 x Power Adapter (12V 1A DC)

1 x Detachable Plug

3 x Phoenix Conn.

(Male, 3.5 mm, 3 pins)

2 x Mounting Brackets

in the box

US OFFICE:

TEL: +1 518-289-1293

EMEA OFFICE:

TEL: + 44 (0) 1793 230 343

WYRESTORM PRODUCT SPECIFICATION SHEET

Specifications NHD-200-TX

Input Video Ports 1 × DVI IN

Input Video Type HDMI 1.3, DVI 1.0, VGA, YPbPr

Input Video Resolutions HDMI: 640 x 480 @ 60Hz, 480p @ 60Hz, 576p @ 50Hz,

800 x 600 @ 60Hz, 1024 x 768 @ 60Hz, 720p @ 50Hz, 720p @ 60Hz,

1280 x 800 @ 60Hz, 1280 x 1024 @ 60Hz, 1360 x 768 @ 60Hz,

1366 x 768 @ 60Hz, 1400 x 1050 @ 60Hz, 1440 x 900 @60Hz,

1680 x 1050 @ 60Hz, 1080p @ 24Hz, 1080p @ 25Hz, 1080p @ 30Hz,

1080p @ 50Hz, 1080p @ 60Hz, 1920 x 1200 @ 60Hz

DVI: 640 x 480 @ 60Hz, 480p @ 60Hz, 576P @ 50Hz, 800 x 600 @ 60Hz,

1024 x 768 @ 60Hz, 720p @ 50Hz, 720p @ 60Hz, 1280 x 800 @ 60Hz,

1280 x 1024 @ 60Hz, 1360 x 768 @ 60Hz, 1366 x 768 @ 60Hz,

1400 x 1050 @ 60Hz, 1440 x 900 @ 60Hz, 1680 x 1050 @ 60Hz,

1080p @ 24Hz, 1080p @ 25Hz, 1080p @ 30Hz, 1080p @ 50Hz, 1080p @ 60Hz,

1920 x 1200 @ 60Hz

VGA: 640 x 480 @ 60Hz, 800 x 600 @ 60Hz, 1024 x 768 @ 60Hz, 1280 x 1024 @ 60Hz,

1280 x 720 @ 60Hz, 1280 x 768 @ 60Hz, 1280 x 800 @ 60Hz, 1360 x 768 @ 60Hz,

1366 x 768 @ 60Hz, 1440 x 900 @ 60Hz, 1400 x 1050 @ 60Hz,

1680 x 1050 @ 60Hz, 1920 x 1080 @ 60Hz, 1920 x 1200 @ 60Hz

Component: 720 x 480p @ 60Hz, 720 x 576p @ 50Hz, 1280 x 720p @ 50Hz,

1280 x 720p @ 60Hz

Input Video Signal 0.5 ~ 1.2 V p-p

Encoding Data Rate Up to 40 Mbps, congurable

Output Video Ports 1 x LAN

Output Video Type H.264/MPEG-4 AVC

Output Video Resolutions Large IP stream: 480p @ 60Hz ~ 1920 x 1200 @ 60Hz, Small IP stream: 352 x 288 @ 5Hz

Video Impedance 100 Ω

Input DDC Signal 5 V p-p (TTL)

End-to-End Time Latency About 60 ms-90 ms (Low latency mode), About 250 ms-300 ms (High quality mode)

Input Audio Ports 1 x Audio Jack

Input Audio Format Stereo

Output Audio Ports 1 x Phoenix Connector

Output Audio Format Stereo

Control Method Rear panel source switch, PC congurator and RS232

Operating Temperature +32°F ~ +113°F (0°C ~ +45°C) 10% ~ 90%, non-condensing

Storage Temperature -4°F ~ 140°F (-20°C ~ +70°C) 10% ~ 90%, non-condensing

Power 12V 1A DC

Power Consumption 6W (Max.)

ESD Protection Human body model: ±8kV (air-gap discharge) ±4kV (contact discharge)

Surge Protection Voltage ±1 kV

Product Dimensions (WxHxD) 200mm x 25 mm x 94mm / 7.9’’ x 1.0’’ x 3.7’’

Weight 0.48 Kg

Certication CE, FCC, RoHS compliant

For additional product information visit wyrestorm.com

For technical support contact: North America: 1 844-280-WYRE (9973) EMEA/ROW: +44 (0) 1793 230 343 +

Specifications NHD-200-RX & NHD-210-RX

WYRESTORM PRODUCT SPECIFICATION SHEET

Input Video Ports 1 × LAN

Input Video Type H.264/MPEG-4 AVC

Input Video Resolutions 480p @ 60Hz ~ 1920 x 1200 @ 60Hz

Output Video Ports 1 x HDMI

Output Video Type HDMI 1.3

Output Video Resolutions HDMI: 480p @ 60Hz, 576p @ 50Hz, 800 x 600 @ 60Hz, 1024 x 768 @ 60Hz,

720p @ 50Hz, 720p @ 60Hz, 1280 x 800 @ 60Hz, 1280 x 1024 @ 60Hz,

1366 x 768 @ 60Hz, 1440 x 900 @ 60Hz, 1600 x 1200 @ 60Hz,

1680 x 1050 @ 60Hz, 1080p @ 24Hz, 1080p @ 25Hz, 1080p @ 30Hz,

1080p @ 50Hz, 1080p @ 60Hz, 1920 x 1200 @ 60Hz

Video Impedance 100 Ω

End-to-End Time Latency About 60 ms-90 ms (Low latency mode), About 250 ms-300 ms (High quality mode)

Input Audio Ports 1 x LAN

Input Audio Format Audio embedded in streaming media input

Output Audio Ports 1 x Phoenix Connector

Output Audio Format Stereo

Control Method PC congurator and RS232

Operating Temperature +32°F ~ +113°F (0°C ~ +45°C) 10% ~ 90%, non-condensing

Storage Temperature -4°F ~ 140°F (-20°C ~ +70°C) 10% ~ 90%, non-condensing

Power 12V 1A DC

Power Consumption 6W (Max.)

ESD Protection Human body model: ±8kV (air-gap discharge ±4kV (contact discharge)

Surge Protection Voltage ±1 kV

Product Dimensions (WxHxD) 228mm x 25 mm x 111mm / 9’.0’ x 1.0’’ x 4.4’’

Weight 0.6 Kg

Certication CE, FCC, RoHS compliant

US OFFICE:

TEL: +1 518-289-1293

EMEA OFFICE:

TEL: + 44 (0) 1793 230 343

The modular system architecture of NetworkHD 200 removes the limitations of a traditional xed platform I/O matrix system

without compromising quality or reliability, whilst oering signicant cost savings when designing large scale installations. Adding

transmitters and receivers as required enables the system to grow with the needs of the application.

NetworkHD 200 uses multiple technologies to automatically congure and discover system components, making setup a breeze.

Functioning on 10/100 or Gigabit Layer2 SMART switches, NetworkHD 200 does not require advanced integrator network

experience to install, nor does it require complicated VLAN congurations or PC software, making it one of the simplest HD over

IP systems available. Conguring network switches takes minutes through your browser and even the largest distributions can be

quickly and easily congured and expanded.

The NHD-000-CTL controller creates a simple, single interface to congure, manage and control the entire NetworkHD 200

system, whilst also capable of fully integrating with leading control brands including WyreStorm EnadoTM for the highest quality

total HD distribution and control solution over a network.

For further information on this product and other WyreStorm ranges, visit our website or download our latest product guide at

wyrestorm.com

Product specificaties

Merk:	WyreStorm
Categorie:	Digitale decoder
Model:	NHD-200-TX
Kleur van het product:	Zwart
Gewicht:	480 g
Breedte:	200 mm
Diepte:	94 mm
Hoogte:	25 mm
Gebruikershandleiding:	Ja
LED-indicatoren:	Ja
Type verpakking:	Doos
Ondersteunde videoformaten:	AVC, H.261, MPEG4
Ondersteunde video-modi:	480i, 480p, 576i, 576p, 720p, 1080p
Inclusief AC-adapter:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Vermogensverbruik (max):	6 W
Certificering:	CE, FCC, RoHS compliant
Aansluiting voor netstroomadapter:	Ja
Maximale videoresolutie:	1920 x 1200 Pixels
RS-232 port:	1
Ondersteunde grafische resoluties:	640 x 480 (VGA),800 x 600 (SVGA),1024 x 768 (XGA),1280 x 1024 (SXGA),1280 x 800,1360 x 768 (WXGA),1366 х 768,1400 x 1050 (SXGA+),1440 x 900,1680 x 1050 (WSXGA+),1920 x 1200 (WUXGA)
Temperatuur bij opslag:	-20 - 70 °C
Luchtvochtigheid bij opslag:	10 - 90 procent
AC-adapter, uitgangsspanning:	12 V
AC-adapter, uitgangsstroom:	1 A
Aantal kanalen:	1 kanalen
Bedrijfstemperatuur (T-T):	0 - 45 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent