Woods MRD-20 Handleiding

Woods Ontvochtiger MRD-20

Lees hieronder de 📖 handleiding in het Nederlandse voor Woods MRD-20 (17 pagina's) in de categorie Ontvochtiger. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/17

DEHUMIDIFIER



Users manual Wood’s MRD20

GB F

S E

N NL

DK FIN

ROD

Operating instructions Guide d’instructions

Bruksanvisning Manual de instrucciones

Bruksanvisning Gebruiksaanwijzing

Betjeningsvejledning Käyttöohjeet

Manual utilizare

Bedienungsanleitung

Please read this manual carefully before installing and save

the manual for future reference and product warranty.



1. Control panel

2. Outlet for dry air

3. Handle

4. Filter

5. Inlet for dry air

6. Water tank

7. Plug and power cord

8. Outlet for drainage

9. Drainage pipe



FIG A.

Technical drawings

Operating instructions

You can select the required humidity

by pressing the “DEHUMIDIFY” button.

Select desired humidity between 40%

and 80% or choose CONTINUOUS.

The humidity is set in 5% intervals. In

continuous mode, you can change fan

speed but not humidity level.

Press “SPEED” to chose desired fan

speed and “MODE” to choose between

DRY and DEHUMIDIFY mode. In DRY

mode, the fan runs on the highest

speed and you can’t set the humidity.

In DEHUMIDIFY mode, you can set

both fan speed and humidity level.

The compressor will switch o auto-

matically when the water container

is full. When the unit is reset, the

compressor takes around 3 minutes

to switch on. The air goes into the unit

from the back grill and is release on

the top. To maximize the performance

of your dehumidier, do not obstruct

the back grill. To move the unit, unplug

it and empty the water tank.

CONTROL PANEL

Please refer to FIG A:

- Switch the machine ON/OFFPower:

- : Switch between “high” or “low” Speed

fan speed.

- Timer:settimeforautomaticon/o

by 1-8 h.

- choose desired humid-Dehumidify:

ity in 5% percents intervals or choose

continuousdehumidication.

- switch between dry and dehu-Mode:

midify mode.

- press to activate swing of the Swing:

louvers.

- lit when water tank Water indicator:

is full

- lit when unit is in Defrost indicator:

defrost mode

WOOD’S - THE WORLD’S

LEADING DEHUMIDIFIERS

Wood’s dehumidiers have been

known as market leaders for many

years. Wood’s dehumidiers are suit-

able for use in the most demanding

climates, and have high dehumidifying

capacity even at lower temperatures

and humidity levels. They are used

with good results in premises that

become damp such as cellars, garages

or summer-houses. They are also ex-

cellent for drying washing, attics, pool

rooms and laundry, being ecient and

low on energy consumption. Wood’s

dehumidiers will dry your clothes ef-

ciently without wearing them out.

The amount of humidity that the

dehumidier removes depends on

temperature, humidity level and place-

ment. External weather conditions

may also aect the performance of

the dehumidier. In cold weather the

actual humidity, (in grams per cubic

meter air) decreases and thus the

extraction of humidity from the air by

the dehumidier is reduced. Therefore

the dehumidier is suitable for use in

the temperature range +5˚C to +35˚C.

Wood’s dehumidiers are safe in

operation and intended for continuous

use over many years.

EXCESSIVE AIR HUMIDITY -

A DANGER

Condensation occurs when water

vapour in the air comes into contact

with a cold roof, window or wall. When

water vapour is cooled down, conden-

sation occurs, and water-drops are

formed. In high air humidity, the air

may get musty and mould is formed,

causing damage to a house and its fur-

nishings. This environment may even

cause illness for the residents, since

mites and other creatures thrive in a

damp environment. A dehumidier

with high performance creates a good,

healthy humidity level, and for great-

est eciency the doors and windows

of rooms that are being dehumidied

should be kept closed. Wood’s dehu-

midiers remove odours,

PLACEMENT OF YOUR

DEHUMIDIFIER

Wood’s dehumidiers are easy to

move around, all you need to have is

a power source for 220/240V, but bear

in mind the following:

- The dehumidier should not be placed

near radiators or other heat sources

or exposed to direct sunlight, as it will

reduce performance.

- It is benecial to use a radiator or

heating fan to keep the temperature

above +5˚C.

- The dehumidier should stand at least

25cm from a wall or other obstruction,

for maximum air ow.

- Ideal is to put it in the centre

of the room / area.

USING THE DEHUMIDIFIER

If the dehumidier is transported

horizontally, oil may have run out of

the compressor and into the closed

piping system. In such a case, let the

dehumidier stand for a few hours

before being used. It is very important

that the oil runs back into the com-

pressor, otherwise the dehumidier

may be seriously damaged. Once

the unit is plugged in, you will hear 3

noise signals. The unit can be switched

on and o by pressing the “POWER”

button.

dries wood and remove moisture from

sportswear outdoors equipment. A

dehumidier may be used in cellars,

washrooms, garages, crawl spaces,

caravans, summer-houses and on

boats. If the dehumidier is kept in

colder environments, you should study

the Hints at the end of the manual.

NOTE :

When placed in a shower or

bathing area, the dehumidier should

be xed in place. It is compulsory to

check and respect your local bath-

room regulations before use.

NOTE :

The unit is set to work between

5ºC and + 35ºC. If the tempera-

ture goes outside this range it will

automatically switch o. The unit will

automatically restart when the tem-

perature goes within the range.

WAT

An ind

buzze

water

stop a

unit fr

1. Disc

the po

2. Em

3. Put

positio

4. Con

power

DRAI

The d

conne

FIG 9.

Using

1. Disc

the po

water

drip tr

2. Atta

thread

the ho

that th

the dr

3. Con

power

LOW

When

≤5˚C,

cycle o

sor ke

fan ke

this tim

every

tempe

7 min

tion at

mus

ture

qua

haza

Product specificaties

Merk:	Woods
Categorie:	Ontvochtiger
Model:	MRD-20
Kleur van het product:	Black, White
Gewicht:	12500 g
Breedte:	356 mm
Diepte:	240 mm
Hoogte:	595 mm
Geluidsniveau:	46 dB
Aantal snelheden:	2
Capaciteit watertank:	4.2 l
Geschikt voor ruimtes tot:	100 m²
Koelend medium:	R134A
Plaatsing:	Vloer
Luchtstroom:	187 m³/uur
Luchtfilter:	Ja
Stroomverbruik (typisch):	233 W
Indicator watertank vol:	Ja
Geschikt voor ruimtevolume tot:	- m³
Soort vochtregeling:	Trede