Wisycom BFL-T2 Handleiding

Bekijk gratis de handleiding van Wisycom BFL-T2 (2 pagina’s), behorend tot de categorie Microfoon. Deze gids werd als nuttig beoordeeld door 2 mensen. Heb je een vraag over Wisycom BFL-T2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

BFLT2 QUICK USER GUIDE

ISTR-BFLT2-01_BFLT2-en-q01

Wireless Microphone Reception Setup

•PowertheBFL-T2usingthepowersupplyprovidedinthepackage.

•ConnecttheopticalconnectorsasdescribedintheOpticalLink

Connectionsection.

•ConnecttheantennastotheRFconnectorsusingcoaxialcables.

•AccessthemenuandcongurebothLinkAandLinkB:

-Setthemodulename(maximum8characters).

-SettheoperatingmodetoANT(antennareceptionmode).

-Adjustthegainorenabletheboosteronlytocompensatefor

coaxialcableloss.

-Setthelteraccordingtothemicrophonefrequencyrange.

We recommend ltering the input signal to reduce interfe-

rence, minimize system noise, and prevent laser satura-

tion. Ensure that the RF Overload LED does not turn red.

-SettheLinktoON.

•Onthereceivingopticalmodule(MRK16or

BFLR2),verifythereceivedopticalpower:

≥1mW(optimal)

≥0.3mW(minimumoperatinglevel)

Wireless IEM/IFB Transmission Setup

•PowertheBFL-T2usingthepowersupplyprovidedinthepackage.

•ConnecttheopticalconnectorsasdescribedintheOpticalLink

Connectionsection.

•ConnecttheRFconnectorsusingcoaxialcablestothetransmit-

ters:connectdirecltytotheauxiliaryportsoftheMTK982/

MTK952oraddanattenuatorifusinganothertransmitter.

WARNING: Ensure that the input power is (max. level: 3 dBm, 2mW).0 dBm

The system is designed to transmit only one IEM/IFB channel per module. To

transmit additional channels, the input signal must be attenuated.Refer to the

full user manual for further details.

•AccessthemenuandcongurebothLinkAandLinkB:

-Setthemodulename(maximum8characters).

-SettheoperatingmodetoIFB(transmissionmode).

-SettheLinktoON.

•Onthereceivingopticalmodule(BFLR2),verifythereceivedoptical

power:

≥1mW(optimal)

≥0.3mW(minimumoperatinglevel)

OpticalLinkConnections

BFL-T2_Fx-M0-D1

antenna A

antenna B

MRK16/MRK980 with EXP3 and SFP option

GIGABIT

Ethernet (SFP)

2 x Rx signals

passive/active

antennas

•forM0versionconnect

-2berssinglemodeSC/APCforRFoF

-1bersinglemodeLC/UPCforData

•forM2versionconnect

-1bersinglemodeSC/APCforRFoF

-1bersinglemodeLC/UPCforData

•forM5versionconnect

-1berssinglemodeSC/APCforRFoF

andData

BFL-T2_M5-D3

TX1

MTK982

TX2

AES/EBU

L (I)

R (II)

AF TX2

R (II)L (I)

AF TX1

TX2TX1

TX1TX2

LINK

10-28Vdc

6A MAX

DIGITAL INANALOG INANALOG IN

RF OUT

50 Ω

L (I)L (I)

R (II)R (II)

TX2TX1

(BALANCED)

LINK

STATUS

0dBm

BFL-R2_M5-D3

GIGABIT

Ethernet (SFP)

2 x Tx signals

PAW

amplifier

Product specificaties