Winix Zero Max WXAP480 Handleiding

Bekijk gratis de handleiding van Winix Zero Max WXAP480 (2 pagina’s), behorend tot de categorie Luchtreiniger. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.8 sterren uit 7 reviews. Heb je een vraag over Winix Zero Max WXAP480 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

When to Replace Filters

FilterIndicator LightWhen to ServiceWhen to Replace

Pre-FilternonePermanentClean once every 14 days

Activated Carbon Filternone

Can NOT be WASHED

Every 3 months

True HEPA Filter

Lasts up to

12months

•When the Check Filter Indicator LED is on, it is time to replace the True HEPA Filter.

•Intervals between filter replacement may vary depending on environment.

MAINTENANCE

INITIAL OPERATION

REPLACING FILTERS

D4



Resetting Filter Life:

After replacing your True HEPA Filter, place the Pre-Filter back in and close the Front Panel.

While the unit is on, use a small, thin object (such as a paperclip) to hold the Filter Reset

Button for at least 5 seconds until you hear the beep. After the beep, the Filter Replacement

Indicator will disappear. Your Winix True HEPA is now reset.

1.

Remove the front panel by grasping its upper edge

and gently pulling forward.

2.

Remove the Pre-Filter, then the bag of filters behind

it.

3.

Remove filters from protective plastic bag.

4.

Install the filters until they fit securely in place.

03. True HEPA Filter (back)

02. Activated Carbon Filter (middle)

01. Pre-Filter (front)

5.

After filters are installed, close the front panel.

6.

Insert the power cord into an electrical outlet.

WHERE TO USE

MODEL PART DIAGRAM

30~45cm

30~45cm

Allow 30~45cm. of space between TVs, radios, and

other electronics.

Electromagnetic interference from

certain electronics may cause product malfunction.

Place indoors away from direct sunlight.

Direct

exposure may cause product malfunction or failure.

Only place on hard, flat surfaces.

Flimsy or slanted

surfaces may result in abnormal noise and vibrations.

Allow at least 30~45cm. from walls for maximum air

flow

3

True HEPA Filter

2

Activated Carbon Filter

4

PlasmaWave

®

TechnologyPre-Filter

1

4-STAGE AIR PURIFICATION

Air Purification means it

removes inanimate particles

CLEANING CARE

NOTICE

• When cleaning the unit, always unplug the power cord

first and then wait until the unit has cooled down.

• Never disassemble, repair, or modify this unit yourself.

• Do not use flammable sprays or liquid detergents.

• Do not allow children to clean or maintain the unit.

• Before cleaning or maintaining, ensure unit is

unplugged.

• Do not use benzene, alcohol, or other volatile fluids,

which may cause damage or discoloration

.

SPECIFICATIONS

ModelWXAP480

VoltageAC 220 V - 240 V, 50 / 60 Hz

Power Rate90 W

Verified

Room Size

99 m

2

Dimensions

440 mm (W) x 280 mm (D)

x 600 mm (H)

Weight7.4 kg

Filter SKUFilter D4 : 1712-0100-05

Exterior design, and product specifications may be changed

without prior notice to improve product performance.

AUSCLIMATE FILTER CLUB

For exclusive savings

on replacement filters

AUSTRALIANEW ZEALAND

New Zealand

PO Box 100707

North Shore Mail Centre

Auckland 0745

www.cdbgroup.com

Australia

PO Box 574

South Morang

Victoria 3752

www.cdbgroup.com

FRONT

PACKAGE CONTENTS

BACK

Control Panel

Air Outlet

Vent

Handle

Power Plug

Unit

(1) Pre-Filter

(4) Activated Carbon Filters

(1) True HEPA Filter

User

Manual

Front Panel

01. Smart Sensor

Detects the amount of odorous gas in the

environment. When in Auto mode, the fan speed

adjusts according to the detected amount of gas.

02. Filter Replacement Indicator

LED light indicates when it is time to change

the filter.

03. Filter Reset Button

After replacing the True HEPA Filter, use a small

object such as a paper clip, to press and hold

the Filter Reset Button for at least 5 seconds

until the Filter Replacement Indicator turns off.

04. PlasmaWave

®

Indicator

Indicates whether PlasmaWave

®

is enabled

or disabled.

05. PlasmaWave

®

Button

Enables or disables PlasmaWave

®

. When the

unit is running, you may hear a chirping or

buzzing sound. The sound is from particles

passing through PlasmaWave

®

, it is normal

and does not signify product failure. Press

the PlasmaWave

®

button when the unit is on

to enable or disable this feature.

06. Air Quality Indicator

Color coded LED light indicates one of three

levels of Air Quality: Red (poor), Amber (fair),

and Blue (good).

07. Fan Speeds

Indicates the current fan speed.

08. Auto Mode

Auto Mode automatically adjusts fan speeds

according to your indoor air quality. The fan

speed will adjust to low when air quality is

good, medium when fair, and to high when poor.

09. Sleep Mode

When Sleep Mode is activated, the Air Quality

Indicator LED light is disabled.

•Fan speed will automatically set to minimum

speed (lower than 'Low') which will be nearly

silent.

10. Fan Speed Button

Use the Fan Speed Button to set the desired

Fan Speed. Fan Speeds cycle in this sequence:

Low(1), Medium(2), Turbo(3), Auto

, Sleep,

Low(1).

11. Power Indicator

LED light indicates when the air purifier is

turned on.

12. Power Button

Turns the unit on or off. During the first 30

seconds of powering up, the Air Quality

Indicator will cycle through Blue, Amber and

Red colors.

•Smart Sensor takes approximately 4minutes

to detect the air quality in the environment

before normal operation begins.

13. Light Sensor

When in Auto Mode, the light sensor detects

when to put the unit into Sleep Mode.

•Detects the amount of ambient light in the

environment.

CONTROL PANEL

1210

0204110706

0308

01050913

1

2

3

Latch

03

Latch

02

01

Cleaning the Filters:

Use a vacuum cleaner or soft brush to

clean the Pre-Filter.

•If it is excessively soiled, rinse in room

temperature water. Do not use detergent or

soap.

Allow the filter to dry for 24 hours or

more before using.

Intervals between filter

cleaning may vary depending on the air

quality. Do not use hot water over 40

o

C or

volatile fluids such as paint thinner.

Cleaning the Exterior & Interior:

Wipe with a soft damp cloth using room

temperature water.

•Afterwards, wipe it down with a dry cloth.

Open the front panel and clean the interior

with a vacuum cleaner.

•For optimal performance, clean every

1-2months.

Product specificaties