WilTec 63910 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor WilTec 63910 (9 pagina's) in de categorie Waterpomp. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
User’s Manual
Pool Pump with Variable Rotation Speed
63908–63910
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
https://www.XPOtool.com Item 63908–63910 Page 2
The Tool Experts
11 2022-1
The information contained in this document may alter at any time without prior notice. No part of this
document may be copied or otherwise duplicated without prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-
ual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating
manual is complete, accurate, and up- -date, errors cannot be ruled out entirely.to
If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler – Germany
To return your goods for exchange, repair, or other purposes, please use the following address. Atten-
tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team
before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler – Germany
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
https://www.XPOtool.com Item 63908–63910 Page 3
The Tool Experts
11 2022-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Product features
This HPP-series intelligent pump with variable frequency is a pump that can record pump frequency and
performance changes. It is characterised by simple troubleshooting and high starting torque.
This technical description contains important operating instructions and precise explanations of the set-
ting values and parameters. Before using the pump for the first time (installation, operation, mainte-
nance, and inspection, etc.), carefully and completely read the instructions.
The pump has the following features:
• Data inquiry – Review current power, frequency, and other data
• Convenient speed control – Three dials for quick speed control and up and down buttons for
fine speed adjustment
• Low water protection – Automatically shuts off when the pump detects a lack of water in the
supply line
• Start-up after water supply – The pump recognizes whether there is still water after it has been
switched off due to lack of water and can then be put into normal operation after water supply
• Power fail memory – The pump can automatically record percentage of rotation speed and
on/off status
Safety instructions
• The pump must be operated in a clean and dry place with good ventilation.
• Water ingress into the control box and too low or too high temperatures can damage the pump.
• Users must observe the safety rules for using electricity.
• The pump must never be operated with wet hands.
• If there is no fan, it must be ensured that the fan at the end of the motor can blow through the
cooling fins to avoid high temperatures.
• The water pump motor is a three-phase induction motor, and the pump is delta-earthed. Please
ensure safe and correct earthing.
• Whenever you use the pump, install the frequency converter according to the instructions.
• Always and only operate the pump in accordance with the instructions.


Product specificaties

Merk: WilTec
Categorie: Waterpomp
Model: 63910

Heb je hulp nodig?

Als je hulp nodig hebt met WilTec 63910 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Waterpomp WilTec

WilTec

WilTec 63910 Handleiding

7 December 2023
WilTec

WilTec 50967 Handleiding

17 November 2023
WilTec

WilTec 50453 Handleiding

17 November 2023
WilTec

WilTec 52007 Handleiding

17 November 2023
WilTec

WilTec 50965 Handleiding

17 November 2023
WilTec

WilTec 50266 Handleiding

17 November 2023
WilTec

WilTec 50268 Handleiding

17 November 2023
WilTec

WilTec 51541 Handleiding

17 November 2023
WilTec

WilTec 50921 Handleiding

17 November 2023
WilTec

WilTec 51561 Handleiding

17 November 2023

Handleiding Waterpomp

Nieuwste handleidingen voor Waterpomp