Whirlpool GC3SHAXVB Handleiding

Whirlpool Koelkast GC3SHAXVB

Lees hieronder de đź“– handleiding in het Nederlandse voor Whirlpool GC3SHAXVB (37 pagina's) in de categorie Koelkast. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/37
THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING,
please visit our website at www.whirlpool.com for additional information. If you still need assistance, call us at 1-800-253-1301.
In Canada, visit our website at www.whirlpool.ca or call us at 1-800-807-6777.
You will need your model and serial number located on the inside wall of the refrigerator compartment.
REFRIGERATOR SAFETY
Table of Contents / Índice / Table des matières
REFRIGERATOR SAFETY ................................1
REFRIGERATOR USE.......................................2
REFRIGERATOR CARE ....................................6
TROUBLESHOOTING.......................................7
ACCESSORIES..................................................9
WATER FILTER CERTIFICATIONS..................9
PERFORMANCE DATA SHEETS...................10
WARRANTY .....................................................12
SEGURIDAD DEL REFRIGERADOR..............13
USO DE SU REFRIGERADOR........................14
CUIDADO DE SU REFRIGERADOR ..............18
SOLUCIĂ“N DE PROBLEMAS ........................19
ACCESORIOS..................................................21
HOJA DE DATOS DEL RENDIMIENTO.........22
GARANTĂŤA .......................................................24
SÉCURITÉ DU RÉFRIGÉRATEUR .................25
UTILISATION DU RÉFRIGÉRATEUR.............26
ENTRETIEN DU RÉFRIGÉRATEUR...............30
DÉPANNAGE ...................................................31
ACCESSOIRES................................................33
FEUILLES DE DONNÉES
SUR LA PERFORMANCE...............................34
GARANTIE .......................................................36
®
REFRIGERATOR USER INSTRUCTIONS
W10189345A
You can be killed or seriously injured if you don't immediately
You can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
2
REFRIGERATOR USE
Using the Controls
Temperature Control Adjustment and Cooling On/Off
The refrigerator and freezer control buttons are located on the
dispenser panel.
To turn cooling off, press and hold the LOCK and FAST ICE/COOL
buttons at the same time for 3 seconds. Press and hold LOCK
and FAST ICE/COOL again to turn cooling on. Your refrigerator
and freezer will not cool when cooling is off.
IMPORTANT: To avoid unintentionally locking the dispenser
or changing other settings, be sure to press both buttons at
exactly the same time.
For your convenience, your refrigerator and freezer controls are
preset at the factory. When you first install your refrigerator, make
sure that the controls are still set to the “mid-settings.”
To view set points, press the TEMPERATURE button on your
dispenser panel. The factory recommended set points are
0°F (-18°C) for the freezer and 37°F (3°C) for the refrigerator.
IMPORTANT:
â– Wait 24 hours before you put food into the refrigerator. If you
add food before the refrigerator has cooled completely, your
food may spoil.
NOTE: Adjusting the set points to a higher (colder) than
recommended setting will not cool the compartments any
faster.
â– If the temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not
blocked before adjusting the controls.
â– The preset settings should be correct for normal household
usage. The controls are set correctly when milk or juice is as
cold as you like and when ice cream is firm.
â– Wait at least 24 hours between adjustments. Recheck the
temperatures before other adjustments are made.
Proper Disposal of Your Old Refrigerator
IMPORTANT: Child entrapment and suffocation are not problems
of the past. Junked or abandoned refrigerators are still dangerous
– even if they will sit for “just a few days.” If you are getting rid of
your old refrigerator, please follow these instructions to help
prevent accidents.
Before You Throw Away Your Old Refrigerator or Freezer:
â– Take off the doors.
â– Leave the shelves in place so that children may not easily
climb inside.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:
SAVE THESE INSTRUCTIONS
â–  Plug into a grounded 3 prong outlet.
â–  Do not remove ground prong.
â–  Do not use an adapter.
â–  Do not use an extension cord.
â–  Disconnect power before servicing.
â–  Replace all parts and panels before operating.
â–  Remove doors from your old refrigerator.
â–  Use nonflammable cleaner.
â–  Keep flammable materials and vapors, such as gasoline,
away from refrigerator.
â–  Use two or more people to move and install refrigerator.
â–  Disconnect power before installing ice maker (on ice maker
kit ready models only).
â–  Use a sturdy glass when dispensing ice (on some models).
WARNING
Suffocation Hazard
Remove doors from your old refrigerator.
Failure to do so can result in death or brain damage.
3
â– The display screen on the dispenser control panel has a
backlight, which will turn off automatically when the control
buttons have not been used for 30 seconds or more. When
the backlight is off, the first press of a control button will only
reactivate the backlight, without changing any settings. Within
30 seconds after the backlight has been reactivated,
additional presses of control buttons will change the
applicable settings.
Adjusting the Controls
To adjust the set points, press and hold the TEMPERATURE
button for 3 seconds. When adjust mode is activated, set points
and adjusting information will appear on the display screen.
NOTE: To view Celsius temperatures, press the FILTER button
when adjust mode is activated. To return the display setting to
Fahrenheit, press FILTER again.
Refrigerator Controls
When adjust mode is activated, the LOCK and FAST ICE/COOL
buttons adjust the refrigerator compartment temperature. The set
point range for the refrigerator is 33°F to 45°F (0°C to 7°C).
â– Press LOCK to lower the set point.
â– Press FAST ICE/COOL to raise the set point.
Freezer Controls
When adjust mode is activated, the ICE and LIGHT buttons adjust
the freezer compartment temperature. The set point range for the
freezer is -5°F to 5°F (-21°C to -15°C).
â– Press ICE to lower the set point.
â– Press LIGHT to raise the set point.
Press TEMPERATURE to exit adjust mode, or allow about
15 seconds of inactivity and adjust mode will turn off
automatically.
Additional Features
NOTE: The display screen on the dispenser control panel has a
backlight, which will turn off automatically when the control
buttons have not been used for 30 seconds or more. When the
backlight is off, the first press of a control button will only
reactivate the backlight, without changing any settings. Within
30 seconds after the backlight has been reactivated, additional
presses of control buttons will change the applicable settings.
Fast Cool and Fast Ice
The Fast Cool feature assists with periods of heavy ice usage, full
grocery loads, or temporarily warm room temperatures.
The Fast Ice feature assists with temporary periods of heavy ice
use by increasing ice production.
â– Press the FAST ICE/COOL button to turn on the Fast Cool
feature. When the feature turns on, the “Fast Cool” animation
will appear on the dispenser display.
The Fast Cool setting will remain on for 24 hours unless
manually turned off.
â– Press FAST ICE/COOL again to turn off Fast Cool and turn on
the Fast Ice feature. When the feature turns on, the “Fast Ice”
animation will appear on the dispenser display.
The Fast Ice setting will remain on for a minimum of
90 minutes unless manually turned off.
â– Press FAST ICE/COOL a third time to activate Fast Cool and
Fast Ice at the same time. When the features are activated,
both the “Fast Cool” and “Fast Ice” animations will appear on
the dispenser display.
â– Press FAST ICE/COOL a fourth time to turn both Fast Cool
and Fast Ice off.
When Fast Cool and/or Fast Ice are active, the temperature
display will not change. After 24 hours, the refrigerator returns to
the previous temperature set points.
NOTE: If increased ice production is desired at all times, change
the freezer control to a lower setting. Setting the freezer to a
colder temperature may make some foods, such as ice cream,
harder.
Temperature Display Always On
This feature keeps the temperature display on at all times.
â– Press and hold TEMPERATURE and LOCK at the same time
for 3 seconds to turn the feature on.
IMPORTANT: To avoid unintentionally locking the dispenser
or changing other settings, be sure to press both buttons at
exactly the same time.
â– Press and hold TEMPERATURE and LOCK at the same time
for 3 seconds again to turn the feature off.
CONDITION: TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold REFRIGERATOR Setting
1° higher
REFRIGERATOR too warm REFRIGERATOR Setting
1° lower
FREEZER too cold FREEZER Setting
1° higher
FREEZER too warm/too little ice FREEZER Setting
1° lower


Product specificaties

Merk: Whirlpool
Categorie: Koelkast
Model: GC3SHAXVB

Heb je hulp nodig?

Als je hulp nodig hebt met Whirlpool GC3SHAXVB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Koelkast Whirlpool

Handleiding Koelkast

Nieuwste handleidingen voor Koelkast