Watson VM-148-HCS-R Handleiding
Watson
Niet gecategoriseerd
VM-148-HCS-R
Bekijk gratis de handleiding van Watson VM-148-HCS-R (5 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 55 mensen en kreeg gemiddeld 4.7 sterren uit 28 reviews. Heb je een vraag over Watson VM-148-HCS-R of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/5
Thank you for choosing Watson Pro
Please read this user manual carefully, and keep
it for reference before using the battery.
AM/VM-99-HCS-R
AM/VM-148-HCS-R
Cine style
Li-ion Battery with LED
and 3-Stud or V-Mount
SAFETY INSTRUCTIONS
Make sure the battery is fully charged before use.
When not in use, remove the battery from its device. Some
electronic equipment will draw current even when the switch is off.
Do not short-circuit the terminals. This battery is protected with
an internal self-resetting fuse, but short circuits may still cause
severe damage to the battery.
Do not attempt to open the battery case under any circumstances.
Do not remove the battery from any equipment that is powered on.
Always power off your equipment before removing the battery.
Use the battery under proper environmental conditions: 14°F to
122°F (-10°C to 50°C) with a Relative Humidity (RH) less than 85%.
The battery may be warm during use or recharging. This is normal.
The battery should be charged up to 40% for storage longer than
one month, and should be charged every 6 months.
Keep the battery away from fire, heat, and high pressure.
Do not expose the battery to rain or moisture.
Do not drop the battery or subject it to strong shocks.
Keep this unit away from water and any flammable gases or liquids.
Clean the battery and terminals with only a clean, soft,
and dry cloth.
When operation time has noticeably decreased, the battery may
need to be replaced.
Keep this product away from children.
Store the battery in a cool, dry place.
PRODUCT FEATURES
High-powered li-ion cells provide constant output up
to 180 W and 15 A.
Battery-level LED indicators for remaining battery
capacity.
Built-in D-tap connector powers your camera
accessories.
5 V/1 A USB 2.0 output for USB-powered devices.
Built-in intelligent control circuit protects against
damage from current or voltage overload,
overheating, or short circuits.
OVERVIEW
. Battery-level LED meter
Shows remaining capacity of
the battery. When capacity
reaches less than 9%, the
leftmost LED will flash.
Battery-level check button
D-tap output
12 V, 10 A max
. USB output
Press the battery-level check
button to start charging or to
power your USB device.
Mounting interface: 3-stud
or V-mount
1
2
3
4
5
4
1
2
5
3
Product specificaties
| Merk: | Watson |
| Categorie: | Niet gecategoriseerd |
| Model: | VM-148-HCS-R |
Heb je hulp nodig?
Als je hulp nodig hebt met Watson VM-148-HCS-R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Watson
28 April 2025
5 Februari 2025
5 Februari 2025
5 Februari 2025
5 Februari 2025
5 Februari 2025
5 Februari 2025
5 Februari 2025
2 Februari 2025
2 Februari 2025
Handleiding Niet gecategoriseerd
- Wire Technologies
- Collective Minds
- Sandia Aerospace
- Sony Optiarc
- Snow Joe
- Harley Benton
- Möhlenhoff
- Truper
- Nivona
- NEO Tools
- Keter
- Genaray
- Gefen
- J.P. Instruments
- MARTOR
Nieuwste handleidingen voor Niet gecategoriseerd
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025