WAC Lighting R3CRDT Handleiding

Bekijk gratis de handleiding van WAC Lighting R3CRDT (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.6 sterren uit 4 reviews. Heb je een vraag over WAC Lighting R3CRDT of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTALLINSTRUCTION ATION

Oculux 3.5" Architectural Downlight Trim

RC3RDT, RC3RPRC3RWT, RC3RDL, RC3RPL, RC3RWL T,

RC3SDT, RC3SPT, RC3SWT, RC3SDL, RC3SPL,RC3SWL

SAFETY INSTRUCTION

I

MPO

RTANT:NEVERattemptanyworkwithoutshuttingofftheelectricity.

AVERTISSEMENT

IMPORTANT:Coupezl’électricitéavantTOUTEmanipulation.

CAUTION:

All pa

rts must be usedas indicated in these instructions. Donot substit

uteany parts, leaveparts out, or use any parts that

are worn out broken. Failure to follow thisinstruction couldvalidate the UL/cULlisting of this fixture.or in

Trim Installationand Trimless :

Folloappropriatehousinginstructiontbegintheinstillationw o

1.Pinch the trims springs inwardand push themthrough the slots

on the housincollar(SeFIG 1).g e

Trim and Trimless Removal:

1.Toremovetrimfromtrimassemblyforservicing,liftlensand

gentlypulltrimdownward.Onesideofspringiscaptiveandmay

need to be pinched together to fully remove. (See FIG 2).

NOTE: Pinhole trims have edgeto grab and do not require lifting of

lens.

1

WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. August, 2018

waclighting.com

Phone (800) 526.2588

Fax (800) 526.2585

Headquarters/Eastern Distribution Center

44 Harbor Park Drive

Port Washington, NY 11050

Central Distribution Center

1600 Distribution Ct

Lithia Springs, GA 30122

Western Distribution Center

1750 Archibald Avenue

Ontario, CA 91760

•Read all instructions before installing.

•System is intended for installation by a qualified electrician in accordance with the National Electrical Code and local regulations.

•Go to the main fuse box, or circuit breaker. Place the main power switch in the

“OFF” position and unscrew the fuse(s) or switch “OFF”

the circuit breaker switch(es) that control the power to the fixture or room that you are working on.

•Place the wall switch in the “OFF” position.

•Lisez toutes les instructions avant d’installer.

•Système est destiné à être installé par un électricien qualié en conformité avec le code national de l’électricité et les règlements locaux.

•Accédez au panneau central de disjoncteurs ou de fusibles de votre demeure et placez l’interrupteur principal en position d’arrêt (« OFF »).

•Placez l’interrupteur mural en position d’arrêt (« OFF »).

Product specificaties