WAC Lighting InvisiLED T24-CC1 Handleiding

Bekijk gratis de handleiding van WAC Lighting InvisiLED T24-CC1 (10 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 5.0 sterren uit 8 reviews. Heb je een vraag over WAC Lighting InvisiLED T24-CC1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTALLATION INSTRUCTIONS

InvisiLED RGBWW

T24-CC1

Waclighting.com

Waclighting.com

Waclighting.com

Waclighting.comWaclighting.com

Phone (800) 526.2588

Fax (800) 526.2585

Headquarte

Headquarte

Headquarte

HeadquarteHeadquarters/Eastern Dis

rs/Eastern Dis

rs/Eastern Dis

rs/Eastern Disrs/Eastern Distribution Ce

tribution Ce

tribution Ce

tribution Cetribution Center

nter

nter

nter nter

44 Harbor Park Drive

Port Washington, NY 11050

Central Distributi

Central Distributi

Central Distributi

Central DistributiCentral Distribution Center

on Center

on Center

on Center on Center

1600 Distribution Ct

Lithia Springs, GA 30122

Western Distribution

Western Distribution

Western Distribution

Western DistributionWestern Distribution Center

Center

Center

Center Center

1750 Archibald Ave

Ontario, CA 91761

WAC Lighting

retains the right to modify the design of our products at any time as part of the company's continuous improvement program. DEC 2025 1.

SAFETY INSTRUCTIONS

IMPORTANT: NEVER attempt any work without shutting off the electricity.

Always turn off power at fuse box prior to installation to prevent electrical shock.

Intended for indoor use. Dry and damp locations.

Install in accordance with National Electrical Code (NEC), and local regulations.

Consult with local inspector to assure compliance.

Do not submerge, or install within 5 feet of a swimming pool.

Do not connect the tape directly to high voltage power.

CAUTION – TO REDUCE RISK OF FIRE AND ELECTRICAL SHOCK

Read all instructions before installing.

Handle product with care.

Do not conceal or extend exposed conductors through a building wall

To reduce the risk of fire and burns, do not install this lighting system where the exposed bare conductors can be shorted or contact any

conductive materials

To reduce the risk of overheating and potential fire risk, make sure all connections are tight.

Do not install any fixture assembly closer than 6 in. from any curtain, or similar combustible material.

Do not modify or disassemble product beyond instructions or warranty will be void.

Failure to follow safety warnings, and installation instructions will void the warranty.

ATTENTION - AFIN DE RÉDUIRE LES RISQUES D'INCENDIE ET DE CHOC ÉLECTRIQUE

• Lire toutes les instructions avant d'installer.

• Manipuler le produit avec soin.

• Ne pas dissimuler et faire passer les conducteurs exposés à travers un mur de bâtiment.

• Afin de réduire les risques d'incendie et de brûlures, ne pas installer ce système d'éclairage là où les conducteurs dénudés peuvent être court-

circuités, ou entrer en contact avec des matériaux conducteurs.

• Afin de réduire le risque de surchauffe et d'incendie potentiel, s'assurer que toutes les connexions sont bien serrées.

• Ne pas installer aucun luminaire à moins de 6 pouces d'un rideau ou d'un matériau combustible similaire.

• Ne pas modifier ou démonter le produit au-delà des instructions sous peine d'annuler la garantie.

• Ne pas respecter les avertissements de sécurité et des instructions d'installation annulera la garantie.

WIRING AND INSTALLATION:

1. Turn Power off at circuit breaker (See FIG. 1)

FIG. 1

2. Mounting24VDC Class 2 remote power supply and WAC Wireless DMX LED

Controller at desired location. (See FIG. 2)

FIG. 2

Do not bend the tape light to

a diameter less than 4 inches

Do not bend the tape light

on a horizontal plane

Do not fold or

twist LED Tape

Do not cover LED tape

light with any materials

Do not power the LED

tape while attached to the

spool or tightly coiled

Avoid contact with sharp

objects

Install on stable

clean, dry surface

Product specificaties