Vonyx STM3400 Handleiding

Vonyx Mengpaneel STM3400

Lees hieronder de 📖 handleiding in het Nederlandse voor Vonyx STM3400 (21 pagina's) in de categorie Mengpaneel. Deze handleiding was nuttig voor 56 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/21

STM3400 Mixer 2Ch USB/MP3 DSP Scratch

Ref. nr.: 172.444

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

GEBRAUCHSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.2

ENGLISH

Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to

benet fully from all features.

Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions

to avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the product, please ask advice from a

specialist. When the product is switched on for the rst

time, some smell may occur. This is normal and will

disappear after a while.

- The product contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the

product. This may cause electrical shock and

malfunction.

- Do not place the product near heat sources such as

radiators, etc. Do not place the product on a vibrating

surface. Do not cover the ventilation holes.

- The product is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the product from a mains outlet,

always pull the plug, never the lead.

- Do not plug or unplug the product with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the product is damaged to such an extent that internal

parts are visible, do NOT plug the product into a mains

outlet and DO NOT switch the unit on. Contact your

dealer. Do NOT connect the product to a rheostat or

dimmer.

- To avoid re and shock hazard, do not expose the

product to rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the product to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10- fuse. 16A

- During a thunderstorm or if the product will not be used

for a longer period of time, unplug it from the mains. The

rule is: Unplug it from the mains when not in use.

- If the product has not been used for a longer period of

time, condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the

product in humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the produ on and o. This ct

shortens the life time.

- Keep the product out of the reach of children. Do not

leave the product unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- his product is with speaker inside which can cause If t

magnetic eld. Keep the product at least 60cm away

from computer or TV.

- If this product have a built-in lead-acid rechargeable

battery. Please recharge the battery every 3 months if

you are not going to use the product for a long period of

time. Otherwise the battery may be permanently

damaged.

- If the battery is damaged please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- If the product has fallen, always have it checked by a

qualied technician before you switch the product on

again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the product with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the product o prior to unplugging it from the

mains and/or other equipment. Unplug all leads and

cables prior to moving the product.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this product.

- Keep the original packing material so that you can

transport the product in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that p2-he should

read and adhere to.

The product s been certied CE. It is prohibited to make any changes to the product. They would invalidate the CE certicate ha

and their guarantee!

NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/ °41 F and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also

invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the

warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety

recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are

present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if

any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing

materials. In the event that the product must be returned to the factory, it is important that the product be returned in the origi nal

factory box and packing.

If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The

arising condensation water might damage your device. Leave the device switched o until it has reached room temperature.

FRONT PANEL

1. SD CARD SLOT: Insert an SD card in this slot.

2. DISPL :AY The disp shows multiple forms of information, for example current MODE, elapsed time, etc. lay

3. LED LIGHT BT : When mode is enabled, this LED will light up.BT

4. USB PORT: You can play media les from a USB device by connecti the device to this slot. ng

5. TTON CLUSTER: BU

MODE BUTTON - Press to change modes between playing SD, USB, MP3 and . BT

PLAY / PAUSE - Press this button to start or pause play.

FOLDER - Press this button to enter FOLDER selection.

REPEAT MODE - Press the repeat button once to continually repeat ALL tracks, press repeat once more to repeat just the

current track.

PREVIOUS - Press this button to go to the previous track. Press and hold to scan backwards within tracks.

NEXT - Press this button to go to the xt track. Press and hold to scan forwards within tracks. ne

6. INPUT SELECTOR: There are 2 dierent input positions line and USB. :

7. MICROPHONE TALKOVER: This function allows you to lower the level of the input channel(s) when talking trough a

microphone.

8. CHANNEL 1 AND 2 FADERS: Adjust the volume of channel 1 & 2.

9. -METER (OUTPUT): VU The LED display shows the level of the left and right master output.

10. CUE: Allows you to monitor the music through the headphones for the selected channel.

11. MICROPHONE LEVEL CONTROL: Adjust the volume the microphone signal. of

12. CROSSFADER: e to fade between channels 1 & 2. Us

13. HEADPHONES LEVEL CONTROL: Adjust the volume of the headphones signal.

14. TIME: When activated, you can use the jog wheel to adjust the value of the X parameter (time) of the eect generator.

15. RATIO: When activated, you can use the jog wheel to adjust the value of the Y parameter (mix ratio, resonance or

feedback) of the eect generator.

16. BYPASS: Press to choose or cancel DJ eects. When choosing eects, will be displayed. When eects are canceled, “DJ”

“ ”BYPASS will be displayed.

17. EFFECT DISPLAY: The display shows multiple forms of information, for example current eect, ratio, bypass etc.

18. EFFECT SELECTOR: You can change between 16 DJ eects: Flanger, Flanger Verb, Phaser, Robot Flanger,

Pitch, Scratch, Analog Delay, Trans, PhaseWah, Filter, AutoWah, SmallHall, Thinplate, Plate, LPF Reverb, Gated Reverb.

19. JOG WHEEL: The jog wheel has 2 functions:

In SCRATCH mode

Select the SCRATCH DJ eect (no. 6) with the eect selector to activate scratch mode. Now use the jog wheel to produce “ ”

scratch sound s.

In PARAMETER mode

TIME BUTTON (X parameter) When the time function is activated, you can use the jog wheel to adjust the value of the X –

parameter (time) of the eect generators.

RATIO BUTTON (Y parameter) – When the ratio function is activated, you can use the jog wheel to adjust the value of the Y

parameter (mix ratio resonance or feedback) of the eect generators. ,

Product specificaties

Merk:	Vonyx
Categorie:	Mengpaneel
Model:	STM3400
Kleur van het product:	Zwart
Gewicht:	1250 g
Breedte:	295 mm
Diepte:	190 mm
Hoogte:	50 mm
USB-poort:	Ja
Rack-montage:	Ja
Frequentiebereik:	20 - 20000 Hz
Aantal kanalen:	2 kanalen
Totale harmonische vervorming (THD):	0.02 procent
AC-ingangsspanning:	110 - 240 V
AC-ingangsfrequentie:	50 / 60 Hz
Stroomverbruik (typisch):	- W
DJ mixer:	Ja
Microfoon Signal-to-Noise Ratio (SNR):	70 dB
Line Signal-to-Noise Ratio (SNR):	80 dB