Vollrath 55457 Handleiding
Vollrath
Snijmachine
55457
Lees hieronder de 📖 handleiding in het Nederlandse voor Vollrath 55457 (12 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 6 personen en werd door 3.5 gebruikers gemiddeld met 4.4 sterren beoordeeld
Pagina 1/12
Operator’s Manual
Instacut™ 5.1 Slicer, Dicer, Wedger and Corer
©
2019 The Vollrath Company L.L.C. Part No. 351753-1 ml 1/30/19
Thank you for purchasing this Vollrath equipment. Before operating the
equipment, read and familiarize yourself with the following operating
and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. Save the original box and packaging. Use this packaging
to ship the equipment if repairs are needed.
SAFETY PRECAUTIONS
To ensure safe operation, read the following statements and understand
their meaning. This manual contains safety precautions which are
explained below. Please read carefully.
Warning is used to indicate the presence of a hazard that will or can
cause severe personal injury or death.
Caution is used to indicate the presence of a hazard that will or can
cause minor or major personal injury if the caution is ignored.
NOTICE: Notice is used to note information that is important but not
hazard-related.
To reduce risk of injury or damage to the equipment:
• Inspect the equipment before each use to make sure it is clean.
• Inspect for broken, nicked or dull blades and if found, replace the
blade assembly.
• Verify the pusher block head assembly and blade pack are a matched
set and are properly aligned.
• Lubricate the guide rods as instructed, using a light coating of
mineral oil, Petrol-Gel, or other food grade lubricant. DO NOT USE
COOKING OIL AS IT WILL BECOME STICKY AND MAY
PERMANENTLY DAMAGE THE EQUIPMENT.
FUNCTION AND PURPOSE
The InstaCut™ 5.1 manual food processor is intended for slicing,
dicing, wedging and coring soft vegetables and fruits. It not intended to
cut hard root vegetables such as carrots and sweet potatoes.
WARNING
CAUTION
Item No. Description
55457 ¼" Dice
55458 " Dice³⁄₈
55459 " Dice½
55460 ¼" Slice
55461 " Slice³⁄₈
55462 " Slice½
55463 4 Section Wedge
55464 6 Section Wedge
55465 8 Section Wedge
55466 10 Section Wedge
55467 12 Section Wedge
55468 6 Section Core
55469 8 Section Core
2 Instacut
™
5.1 Slicer, Dicer, Wedger and Corer Operator’s Manual
FEATURES
BEFORE FIRST USE
Clean the equipment. See the Cleaning section of this manual.
OPERATION
Prepare the Food
Prepare the food to be processed. Maximum food size for:
• Slicing and dicing: 5" (12.7 cm) wide.
• Wedging and coring: 3 " (8.9 cm) in diameter.½
Prepare the Equipment
1. Verify the blade assembly and pusher block match. Each component
must be for the same size slice, dice, core or wedge.
2. Verify the equipment is clean and the blades are in good condition. If
blades are loose, broken or dull, replace the blade assembly.
3. Place the equipment on a clean, flat work surface.
4. Verify the bumpers are in place on the guide rods. DO NOT USE
EQUIPMENT IF BUMPERS ARE NOT IN PLACE.
NOTICE: Using this equipment without the bumpers in place may
damage the equipment.
5. Verify the blade assembly is properly installed in the base. The
thumb screw must be fully tightened and the blade assembly fully
tight against the side of the frame opposite the thumbsrew.
A Base Assembly
B Bumpers
C Guide Rods
D Thumbscrew
E T-Handle
F T-Handle Assembly. Consists of the pusher head, cleaning tool
and the pusher block.
G Cleaning Tool. (Dicer and slicer blade packs only)
H Pusher Block. Pushes the food product through the blade
assembly. Must match the slice, dice, core or wedge size of
blade assembly.
I Blade Assembly. Houses the blades, wedger or corer. Must
match the slice, dice, core or wedge size of the pusher head
block.
E
D
C
B
A
F
G
D
I
H
WARNING
Sharp Blade Hazard
Blades are sharp and can cause cuts. To avoid injury from
sharp blades, handle with caution.
Fully tight.
No space.
Thumbscrew
Instacut
™
5.1 Slicer, Dicer, Wedger and Corer Operator’s Manual 3
OPERATION (CONTINUED)
6. Check for proper blade alignment by slowly setting the pusher head
onto the blade assembly.
Correct - The pusher block passes between the blades.
Incorrect - The pusher block contacts the blades.
7. Lift the T-handle and place the food product on the blade assembly
with the flat side facing down.
8. Using a strong, quick, downward thrust, push the food through the
blade assembly.
9. Repeat this process until you have prepared enough food.
10.Clean and lubricate this equipment immediately after each use. See
the Cleaning section of this manual for more information.
CLEANING
NOTICE: Food acids will dull the blades and corrode the metal.
Clean this equipment immediately after every use.
NOTICE: Do not put this equipment in a dishwasher or dish machine
with soaps, detergents, or other alkaline chemicals that
can harm the equipment.Handwash only.
NOTICE: Do not use abrasive materials, scratching cleansers or
scouring pads to clean this equipment. These can damage
the finish.
Disassemble
1. Slide the pusher head assembly up and off of the guide rods.
2. Loosen the two thumbscrews. Thumbscrews are captive – do not
attempt to remove them. Separate the pusher block from the pusher
head.
3. Raise the bumpers approximately 2" (5.0 cm).
4. Loosen the thumbscrew and carefully remove the blade assembly.
Wash
1. Wipe, rinse or spray off the base, pusher head, pusher block and
blade assembly thoroughly with HOT water.
2. Do not wipe across the blades.
NOTICE: Wiping across the sharp edge of the blade can cause
injury and will dull the blades.
3. Use the included cleaning tool to push food particles out from the
pusher block or blade assembly.
4. Let the equipment air dry.
Reassemble
1. Return the cleaning tool to the pusher head assembly and
reassemble the pusher head assembly.
2. Install the blade assembly into the base. Tighten the thumbscrew to
push blade securely against the frame.
3. Lubricate the guide bar with mineral oil or Petrol-Gel.
NOTICE: Do not use cooking oil as it will become sticky and may
permanently damage the equipment.
4. Slide the bumpers into place.
WARNING
Sharp Blade Hazard
Blades are sharp and can cause cuts. To avoid injury from
sharp blades, handle with caution.
Product specificaties
| Merk: | Vollrath |
| Categorie: | Snijmachine |
| Model: | 55457 |
Heb je hulp nodig?
Als je hulp nodig hebt met Vollrath 55457 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Snijmachine Vollrath
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
10 Juni 2025
Handleiding Snijmachine
- Snijmachine Ernesto
- Snijmachine Princess
- Snijmachine Powerplus
- Snijmachine Gastroback
- Snijmachine Genius
- Snijmachine GOTIE
- Snijmachine Primo
- Snijmachine Hikoki
- Snijmachine Vox
- Snijmachine Team
- Snijmachine Doyon
- Snijmachine Gourmetmaxx
- Snijmachine Swan
- Snijmachine De Buyer
- Snijmachine Makita
Nieuwste handleidingen voor Snijmachine
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
10 Juni 2025
10 Juni 2025