Vocopro CLUB-8800 Handleiding
Vocopro
Niet gecategoriseerd
CLUB-8800
Bekijk gratis de handleiding van Vocopro CLUB-8800 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 5.0 sterren uit 1.5 reviews. Heb je een vraag over Vocopro CLUB-8800 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
Club 8800
Quick Reference Setup Guide
This quick reference guide is provided to help you set up your CLUB-
8800 system for the first time. It contains instructions on setting up
the products that are included in the
CLUB-8800. If you are connect-
ing any additional gear that is not included in the
CLUB-8800, refer to
the appropriate manuals for detailed instructions.
Gathering Package Contents
The first step to putting together your new CLUB system is unpacking all of the necessary equipment. Remember to keep
your manuals nearby when setting up, as you may need to reference them. The products listed below are included in the
CLUB-8800 system:
Mounting components into the CLUB-8800
Follow these basic guidelines when mounting:
• Always screw in the mounting screws using an
“X” formation.
• If possible, to keep the products cooler, leave some
space in between the components in the rack.
CDG 9000 PRO CONTROLLER
UHF 5800
VSP M1
KJ 7800 PRO
CDG 9000 PRO PLAYER
VP 2100
Below is one way to configure your CLUB-8800:
CDG-9000PRO
• (2) RCA cables
• (2) Control interface connector
wires
• (1) Instruction manual
KJM-7800PRO
• (1) Instruction manual
VP-2100PRO
• (1) Instruction manual
VX-15 Speakers
• (4) VX-15 speakers
UHF-5800
• (1) 3 ft. male/male ¼” cable
VSP-M1 Multi-Effect Digital Signal
Processor/Mixer
• (1) Instruction manual
SS-88 Speaker Stand
• (4) SS-88 speaker stands
Road Case
• (1) CLUB-8 road case
• (1) Rolling cart
• (2) MK 38PRO microphones
• (1) Gooseneck DJ light
• (1) Double RCA to ¼” cable (3’3”)
• Rack-mounting screws
On the web at www.vocopro.com
or call toll free 1-800-678-5348
Setup each speaker stand by extending the support lefts to SS-88
a position that is stable and tighten the tension mechanism firmly.
Place a speaker on top of the so that the shaft of the VX-15 SS-88
SS-88 VX-15 fits flush into the mounting cavity on the bottom of the .
NOTE: Each end of the pole has a particular diameter fitted SS-88
for common speakers’ mounting cavities. If the shaft does SS-88
NOT fit flush into the mounting cavity on the , loosen the VX-15 SS-
88 pole and reverse it in the stand and then remount the speaker.
Repeat the above steps for each speaker and stand.
Be sure that each product has a power cord firmly attached. It is
recommended that you use a power strip/surge protector when con-
necting your to a power outlet.CLUB-8800
Connecting Power
Setting up the speakers and speaker stands
VX-15 Speaker
SS-88 Stand
Once you have mounted all of the components into the , it is time CLUB-8800
to connect them. Follow these directions on connecting the components.
NOTE: If you are also connecting components that are not part of the CLUB-
8800 system, please refer to the manual of that product for setup instruc-
tions.
Connect the Control Interface Connector from the corresponding “CONNECT TO MAIN UNIT” jack on the rear panel of the
remote unit to the “CONNECT TO REMOTE CONTROL” jack on the rear panel of the player unit.
CDG-9000PRO remote unit to the player unit.
Connecting the components
CDG 9000 Player
CDG 9000 Controller
1
1.
2.
3.
MAKE SURE ALL PRODUCTS ARE POWERED OFF
PRIOR TO CONNECTING TO AN AC OUTLET.
Using the paired 3’3” RCA to ¼” cable (included):
1. Connect the RCA ends to the L/R unbalanced master outputs labeled UNBAL on the rear panel of the .KJ-7800PRO
2. Connect the ¼” ends to the CHANNEL 1 and CHANNEL 2 ¼” inputs on the rear panel of the . VP-2100
You have the option of either connecting each deck of the separately (Fig. 1) or together through a single CDG-9000PRO
SWITCHED output (Fig. 2).
KJ-7800PRO to VP-2100PRO
CDG-9000PRO player unit to KJ-7800PRO
remote
key control
remote
key control
Separately through individual deck outputs (Fig.1)
Using cables:RCA
1. For each deck, connect the L/R (red & white) audio outputs and Video (yellow) output on the to the AV1 and CDG-9000PRO
AV2 inputs on the rear panel of the KJ-7800PRO
Together through SWITCHED output (Fig. 2)
Using cables:RCA
1. Connect the L/R SWITCHED audio and SWITCHED video outputs on the
CDG-9000PRO player to the AV1 audio input on the
KJ-7800PRO.
remote
key control
-BRIDGE+
remote
key control
CDG 9000 Player
KJ 7800
CDG 9000 Player
KJ 7800
VP 2100
KJ 7800
2
3
Product specificaties
| Merk: | Vocopro |
| Categorie: | Niet gecategoriseerd |
| Model: | CLUB-8800 |
Heb je hulp nodig?
Als je hulp nodig hebt met Vocopro CLUB-8800 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Vocopro
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
Handleiding Niet gecategoriseerd
- Louroe Electronics
- Filmcity
- Abac
- Pelco
- Lindemann
- BYD
- JML
- Kopp
- 3 Legged Thing
- Sôlt
- Oreck
- Conair
- IOttie
- Dnipro
- Reebok
Nieuwste handleidingen voor Niet gecategoriseerd
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025