Vocopro CLUB-8000 Handleiding
Vocopro
Niet gecategoriseerd
CLUB-8000
Bekijk gratis de handleiding van Vocopro CLUB-8000 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.5 sterren uit 2 reviews. Heb je een vraag over Vocopro CLUB-8000 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
This quick reference guide is provided to help you set up your
CLUB-8000 system for the first time. It contains instructions
on setting up the products that are included in the
CLUB-
8000. If you are connecting any additional gear that is not
included in the
CLUB-8000, refer to the appropriate manuals
for detailed instructions.
CDG-9000 PRO
• 1 Control interface connector wire
• [1] Instruction Manual
KJM-8000+ 9-Channel Digital Key Control KJ/DJ Mixer
• [1] Instruction Manual
VP-2100 PRO 2000W Professional Power Amplifier
• [1] Instruction Manual
VX-15 Vocal Speakers
• [4] VX-15 speakers
Gathering Package Contents
The first step to putting together your new system is unpacking all of the necessary equipment. Remem-CLUB-8000
ber to keep your manuals nearby when setting up, as you may need to reference them. The products listed below are
included in the system: CLUB-8000
VSP-M1 Multi-Effect Digital Signal Processor/Mixer
• 1 Instruction manual
SS-88 Speaker Stands
• [4] SS-88 speaker stands
CLUB-8 Road Case
• [1] CLUB-8 road case
• [1] Rolling cart
• [2] MK-38 PRO microphones
• [1] Gooseneck DJ light
• 1 RCA to 1/4” Patch Cable (3.3 ft paired)
• Rack-mounting screws
Mounting components into the CLUB-8
Follow these basic guidelines when mounting:
• Always screw in the mounting screws using an “X” forma-
tion.
• If possible, to keep the products cooler, leave some space in
between the components in the rack.
CDG-9000 PRO CONTROLLER
KJM-8000+ MIXER
CDG-9000 PRO PLAYER
VP-2100 PRO AMPLIFIER
Below is one way to configure your CLUB-8000:
1
2
4
3
On the web at www.vocopro.com
or call toll free 1-800-678-5348
Quick Reference Setup Guide
CLUB-8000
Quick Start
Setting up the speakers and speaker stands
1. Setup each SS-88 speaker stand by extending the support
legs to a position that is stable and tighten the tension mecha
-
nism firmly.
2. Place a VX-15 speaker on top of the SS-88 so that the
shaft of the SS-88 fits flush into the mounting cavity on the
bottom of the VX-15.
NOTE: Each end of the SS-88 pole has a particular diameter
fitted for common speakers’ mounting cavities. If the SS-88
shaft does NOT fit flush into the mounting cavity on the VX-15,
loosen the SS-88 pole and reverse it in the stand and then
remount the speaker.
3. Repeat the above steps for each speaker and stand.
Connecting Power
Be sure that each product has a power cord firmly attached. It is recommended that you use a power strip/surge protector
when connecting your CLUB-8000 to a power outlet.
Connecting the components
Once you have mounted all of the components into the CLUB-8, it is time to connect them. Follow these directions on con-
necting the components.
NOTE: If you are also connecting components that are not part of the CLUB-8000 system, please refer to the manual of that
product for setup instructions.
MAKE SURE ALL PRODUCTS ARE POWERED OFF
PRIOR TO CONNECTING TO AN AC OUTLET
VX-15 Speaker
SS-88 Stand
CDG-9000 PRO remote unit to the player unit
Connect the Control Interface Connector from “CONNECT TO MAIN UNIT” jack on the rear panel of the remote unit to the
“CONNECT TO REMOTE CONTROLLER” jack on the rear panel of the player unit.
CDG-9000 PRO Controller
CDG-9000 PRO Player
1
1 1/4”
1 3/4”
CDG-9000 PRO player unit to KJM-8000+
You have the option of either connecting each deck of the CDG-9000 PRO separately (Fig. 1) or together through a single
SWITCHED output (Fig. 2).
Separately through individual deck outputs (Fig.1)
Using RCA cables:
1. For each deck, connect the L/R (red & white) audio outputs and Video (yellow) output on the CDG-9000 PRO to the
CDG(1) and DVD(3) inputs on the rear panel of the KJM-8000+
CDG(1)
DVD(2)
LD(3)
CDG(1)
DVD(2)
LD(3)
CDG-9000 PRO Player
2
KJM-8000+ Mixer
Together through SWITCHED output (Fig. 2)
Using RCA cables:
1. Connect the L/R SWITCHED audio and
SWITCHED video outputs on the CDG-9000
PRO player to the CDG(1) audio input on the
KJM-8000 PRO
CDG(1)
DVD(2)
LD(3)
CDG-9000 PRO Player
KJM-8000+ Mixer
KJM-8000+ to VP-2100 PRO
You can do this using either XLR(f) to XLR(m) cables or XLR(f) to ¼”(m) cables. Below are instructions for each.
3
CDG(1)
DVD(2)
LD(3)
BAL ANC ED IN PUT S
LOW CUT
FILTER /
THROUGH THROUGH
CH 2 CH 1
SPE AKE R O UT PUT S
-BRIDGE+
MODEL VP-2100PRO
STEREO
MONO
BRIDGE
ON
OFF
50Hz
30Hz
Using two XLR(f) to ¼”(m) (Fig. 2)
1. Connect the XLR(f) end to the LEFT MASTER AUDIO
XLR
output on the KJM-8000+ and the
¼”(m) end to the CH. B
¼” audio input on the VP-2100 PRO.
2. Now do the same thing except now go from the RIGHT
MASTER AUDIO XLR output on the KJM-8000+ and the CH.
A ¼” audio input on the VP-2100 PRO.
CDG(1)
DVD(2)
LD(3)
BAL ANC ED IN PUT S
LOW CUT
FILTER /
THROUGH THROUGH
CH 2 CH 1
SPE AKE R O UT PUT S
-BRIDGE+
MODEL VP-2100PRO
STEREO
MONO
BRIDGE
ON
OFF
50Hz
30Hz
VP-2100 PRO Amplifier
KJM-8000+ Mixer
Using two XLR(f) to XLR(m) (Fig.1)
1. Connect the XLR(f) end to the LEFT MASTER AUDIO
XLR output on the KJM-8000+ and the XLR (m) end to
the left XLR audio input on the VP-2100 PRO.
2. Now do the same thing except now go from the RIGHT
MASTER AUDIO XLR output on the KJM-8000+ and the
right XLR audio input on the VP-2100 PRO
Product specificaties
| Merk: | Vocopro |
| Categorie: | Niet gecategoriseerd |
| Model: | CLUB-8000 |
Heb je hulp nodig?
Als je hulp nodig hebt met Vocopro CLUB-8000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Vocopro
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
Handleiding Niet gecategoriseerd
- AquaMAX
- Garmin
- Magivaac
- AS Synthesizers
- AdHoc
- Draper
- Stihl
- Home Easy
- Deutz
- Renegade
- Olivetti
- Stalco
- Qute
- Raidsonic
- Sifflus
Nieuwste handleidingen voor Niet gecategoriseerd
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025