Vivotek AW-FET-060P-060 Handleiding

Bekijk gratis de handleiding van Vivotek AW-FET-060P-060 (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.8 sterren uit 5 reviews. Heb je een vraag over Vivotek AW-FET-060P-060 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1. Install the PoE switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.

2. Make sure the ventilation openings on the switch are not blocked.

3. Make sure to use Cat. 6 AWG 23 or better RJ45 cable when it’s longer than 100m.

Low quality cables will seriously limit the cabling distance.

4. AC input (100~240V/AC, 50~60Hz), for a max. power consumption of 65W.

AW-FET Unmanaged PoE Switch -060P-060

Quick Installation Guide

The AW-FET-060P-060 is a 4 port 10/100 BaseT PoE switch capable of feeding 15.4W/30W to PoE Devices unmanaged

It comes with 2 x FE RJ45 ports. The switch is capable of a total of 60W PoE power budget.

IMPORTANT:

INTRODUCTION

LED DEFINITIONS

CONNECTION

* 1x PoE switch

* 1x Quick Installation Guide

PACKAGE CONTENTS

Front PanelRear Panel

Copyright © 2023 VIVOTEK INC. All rights reserved.

Green ON

Link/Act

Green ON

Blink: port is connected with data transmission

PoE portsAmber ONThe PoE port is connected with a PD and providing PoE power

PWD

Solid: port is connected without data transmission

VIVOTEK INC.

6 No9LenRd Chung-Ho, New Taipeiity, 23 Taiwan, R.C.F,.12, ien-Chg ., C5,O.

||+886-2-82455282F +886-2-53282455|Esales@vivotek.com

VIVOTUSANC.EK , I

20 Ringwood enue, San JoseC513150Av, A 9

|T: 408-3-868677|F: 408-3-8298 77| salesusa@vivotekm.co

VIVOTEuropeEK

Zandstee122 Hoofddorpelta Electronicsn 5, 13 MZ D

T:1 (0)2008 saleseurope@vivotek.com+3 80 317E:

:

:E:T:

Power is on and normal

* 1x power cord (type by the shipped-to area)

The switch already comes with lightning protection mechanism.

You can also ground the switch through the PE (Protecting

Earth)

cable of AC cord or with Ground Cable.

Grounding Column

DIP Switch

Adaptive 250M

1

2

4

3

VLAN

Video QoS

PD Alive

When you enable Adaptive 250M, all the PoE ports can support to use RJ45 cable up to 250m. The PoE port can

detect the cable length and adjust the data rate automatically. When the cable is shorter than 100m, it will

support 100Mbps automatically, when the cable is longer than 100m, it will support 10Mbps automatically.

When you enable VLAN, Port 1 to 4 will be isolated from each other but still can comunnicate with uplink port 5 and 6.

It can help to stop broadcast storm and increase forwarding rate.

When you enable Video QoS and connect VIVOTEK camerathe video streaming packets will be the first priority to，

make sure video streaming smoothly if the network traffic is high.

When you enable PD Alive, PoE ports will detect the traffic of PoE device. When there is no traffic in 90 seconds, the

PoE port will turn off/on PoE to reboot the PoE device as self-healing.

5. The operating temperature is from 0°C ~ 45°C.

AC 100~240V 50/60Hz

Product specificaties