Vivitek DU6771 Handleiding

Vivitek Beamer DU6771

Lees hieronder de 📖 handleiding in het Nederlandse voor Vivitek DU6771 (21 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/21

DU6771

Remote Communicaton

Manual

DU6771 series DLP Projector Remote Co mmunication Manual

RC67711216 00EN

Table of Contents

The Serial Interface RS 232 Command- ........................................................................................ 2

Communication parameter ......................................................................................................................................... 2

Operation commands ................................................................................................................................................. 2

Operation command syntax ................................................................................................................................ 2

List of operation com nma ds................................................................................................................................ 3

Simulated IR remote controller commands .............................................................................................................. 13

List of simul re ated IR mote controller commands.................................................................................................... 13

Control the Projector Through a N etwork..................................................................................14

Cable connection ..................................................................................................................................................... 14

Set up the projector for networking .......................................................................................................................... 15

Control the projector through a network .................................................................................................................. 16

Control the projector through a web browser ................................................................................................... 16

Control projector with TCP/IP m i toc com un cation pro ol .................................................................................... 19

About Vivitek Support ................................................................................................................. 20

DU6771 series DLP Projector Remote Co mmunication Manual

RC67711216 00EN

The Serial Interface RS 232 Command-

This -2 h s - se aprojector supports to control by RS 32 command, t ere exist two types of RS 232 ri l commands:

 Operation c The commands are listed by the OSD menus structure as ommand: PICTURE,SIGNAL, SETUP,

INSTALLATION SERVICE SE VICE., and R

 Simulated IR o l r ecto -2 m o dremote controller comm ds: Can ntro s p oj r via RS 32 co mand, the c mman s sim ulate IR

remote controller and its control keys.

Communication parameter

You c n use the s d to input co r project l or retrieve ia e t o nrial con rol c mma mmand os f o or c ntro t e n ts op ratio al da a

through Windows client terminal s tware, e.g. Hyperof Te nal rmi , with ASCII characte You u nrs. need to set p the followi g

comm i i pa m n un cat on ra eters in adva ce:

Item

Paramete r:

Bit per Seco , 19200, 38400nd 9600 bps

Dat 8- a Bit bit

P arity None

Stop Bit 1

Flow Control ne No

Port 7000

 . The terminal software does not return every command input character

 -The transmission performance varies with the length of RS 232 cable, please set the baud rate per

the cable length.

Operation commands

Operation co mand sm yntax

An operation s prefixed by char r "op", follo ed by control comm nd settings com and m i acte w a ands separated by

spac n a d a u p " a t te bla k [SP], nd en ed by carri ge ret rn air CR" nd "ASCII hex 0D".Syn ax of serial con rol

comm d an s:

op[SP]<operation command>[SP]<Setting Value>[CR]

A constant indicating this is an operation command.

[SP]

Indicate one blank space.

[CR]

Indicate the command ending carriage return pair "CR" and "ASCII hex 0D".

Setting value

Settings of operation command

Types of setup strings

Characters of settings

Description

Query current setup

Question mark "?" indicates querying current setup

Setup

= <settings>

Syntax: Symbol "=" suffixed with setup values

Increase the value

Some settings are changed in steps. Symbol "+"

indicates changing one step up

Decrease the value

Some settings are changed in steps. Symbol "-"

indicates changing one step down

Execute operation command

None

Certain operation commands execute after input

without further setting or regulators.

Examples:

Control items

Input command

Projector return message

Query current brightness

op bright ? [CR]

OP BRIGHT = 101

Set brightness

op bright = 127 [CR]

OP BRIGHT = 127

Set input signal source to HDMI

op input.sel = 0 [CR]

OP INPUT.SEL = 0

Reset to projection lens

center position

lens.center

 Whe e n and su h e nn s ndi g the multiple comm s, make re t e r turn message of the last comma d is

receiv ding ed before sen out the next one.

Product specificaties

Merk:	Vivitek
Categorie:	Beamer
Model:	DU6771
Kleur van het product:	Wit
Ingebouwd display:	Nee
Gewicht:	18000 g
Breedte:	510 mm
Diepte:	470 mm
Hoogte:	210 mm
Geluidsniveau:	35 dB
Aantal lampen:	2 lampen
Stroombron:	AC
Plaatsing:	Desktop
Afstandsbediening:	IR
Oorspronkelijke beeldverhouding:	16:10
Ethernet LAN:	Ja
Ondersteunde video-modi:	480i,480p,576i,576p,720p,1080i,1080p
Meegeleverde kabels:	AC
Geïntegreerde geheugenkaartlezer:	Nee
Typische contrastverhouding:	3000:1
Zoomcapaciteit:	Ja
Projector helderheid:	6500 ANSI lumens
Projectietechnologie:	DLP
Projector native resolution:	WUXGA (1920x1200)
Keystone correctie, verticaal:	-30 - 30 °
Keystone correctie, horizontaal:	-30 - 30 °
Geschikt voor schermmaten:	40 - 500 "
Projectie-afstand objectief:	1.45 - 24.85 m
Frequentiebereik verticaal:	50 - 85 Hz
VGA (D-Sub)poort(en):	1
Aantal HDMI-poorten:	2
Soort serieële aansluiting:	RS-232
Componentingang video (YPbPr/YCbCr):	1
DVI-poort:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Focus:	Auto
Zoom type:	Auto
Diafragma (F-F):	1.7 - 1.9
Brandpuntbereik:	26 - 34 mm
Levensduur van de lichtbron:	4500 uur
Type lichtbron:	Lamp
Bevestigingsmogelijkheid voor kabelslot:	Ja
Kabelslot sleuf type:	Kensington
Ingebouwde luidsprekers:	Nee
Stroomverbruik (in standby):	0.5 W
Ondersteunde beeldverhoudingen:	2.35:1,4:3,5:4,16:10,16:9
Zoomverhouding:	1.3:1
Throw ratio:	1.73 - 2.27
Formaat analoog signaal:	NTSC 3.58,NTSC 4.43,PAL B,PAL D,PAL G,PAL H,PAL I,PAL M,PAL N,SECAM B,SECAM D,SECAM G,SECAM K,SECAM K1,SECAM L
Volledige HD:	Ja
Ingang stroom:	Ja
RS-232 port:	1
3D:	Ja
Lampvermogen:	300 W
HDMI versie:	1.4
Temperatuur bij opslag:	-10 - 60 °C
Levensduur van de lichtbron (besparingsmodus):	5000 uur
Luchtvochtigheid bij opslag:	5 - 95 procent
Stroomverbruik (netwerk stand-by):	3 W
12V trigger:	Ja
Horizontale lens verplaatsingsbereik:	-14 - 24 procent
Verticale lens verplaatsingsbereik:	-33 - 64 procent
Aantal poorten USB 2.0 Type-B:	1
Afstandsbediening inbegrepen:	Ja
HDBaseT-poort:	Ja
Wifi:	Nee
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	735 W
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 85 procent
Type product:	Projector voor grote zalen
Aantal optionele lenzen ondersteund:	8