Vivanco 23411 Handleiding

Vivanco Netwerkkaart/adapter 23411

Lees hieronder de 📖 handleiding in het Nederlandse voor Vivanco 23411 (40 pagina's) in de categorie Netwerkkaart/adapter. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/40

23411 PCI Fast Ethernet Card

PCI Fast Ethernet Card 10/100

USER’S GUIDE

Bedienungsanleitung

Notice d'emploi

Instrucciones de uso

Istruzioni per l'uso

Gebruiksaanwijzing

Instruções de uso

Instrukcja obsługi

Brugermanualer

Bruksanvisning

EDV Nr. 23411

NET 100 PCI-N

23411 PCI Fast Ethernet Card

1. Introduction

This PCI-based Card is a 10/100BASE-TX Fast Ethernet PCI Card that implements the 32-bit-wide,

and bus mastering interface. The Vivanco Fast Ethernet Card is based upon Industry Standard PCI

local bus specification revision 2.0, that features the Plug-and-Play(PnP) function, making it fully auto-

configurable.

The Vivanco Fast Ethernet Card is a dual-speed Card connected to an Ethernet network with a single

connection over an unshielded twisted-pair (UTP) cable. The Card automatically senses and switches

to either 10 Mbps or 100 Mbps. For 100 Mbps operation, the Card supports operation on Category 5

UTP cable. For 10 Mbps operation, the Card supports operation on Category 3, 4, or 5 UTP cable.

2. Card Installation

This section describes how to install your Vivanco Fast Ethernet Card. Please perform the following

steps to install the card.

1. Turn off your computer and all peripherals.

2. Make a note of how the cables and cords are connected to the computer and disconnect them.

3. Remove your personal computer’s cover (please refer to the owner’s manual of your personal

computer).

4. Discharge the static electricity you might carry by for example touching with your hands the metallic

backside of your computer.

5. Select any available bus mastering PCI slot, and remove the slot cover.

6. Carefully install the Vivanco Fast Ethernet Card into the expansion slot by firmly pressing the card

into the connector slot, until the Card is seated well in the expansion slot, then fasten the card with

a screw from the slot cover.

7. Reinstall your personal computer’s cover and reconnect the power cord and all cables.

8. Connect the Ethernet cable to the RJ-45 connector on your personal computer.

3. Installation of the driver

Note: before installing the driver: Finish section 2. Card Installation first.

This Fast Ethernet Card can be used with many different Operating Systems.

In this manual is described how to install the Card on the following Operating Systems:

• Win98/ME (see 3.1)

• Win2000 / XP / Vista (see 3.2)

For installing the Fast Ethernet Card on other Operating Systems, please refer to the readme file on

the driver disk.

23411 PCI Fast Ethernet Card

3.1 Installing on a Windows 98/ME Operating System

The Vivanco Fast Ethernet Card features PnP therefore the installation is very easy.

Please follow the guidelines below to install the drivers for your Vivanco Fast Ethernet Card.

Turn on your PC.

Windows 98/ME will automatically detect a new device. Press to install the drivers. NEXT

Let windows look for the best driver for your device (first option) and press . NEXT

Insert the driver disk (3.5”) in the drive and select disk units (first selection) and specify the location:

A:\WIN98 or A:\WINME continue by pressing NEXT

Press again to install the drivers for the Vivanco Fast Ethernet Card. NEXT

It is possible that Windows asks you to insert your Windows 98/ME CD-ROM. In this case please

insert your Windows 98/ME CD-ROM in the CD-ROM drive, type or followed D:\WIN98 D:\WINME

by pressing . OK

Press to complete the installation process. FINISH

Product specificaties

Merk:	Vivanco
Categorie:	Netwerkkaart/adapter
Model:	23411
Kleur van het product:	Zilver
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Voldoet aan industriestandaarden:	IEEE 802.3, IEEE 802.3u
Intern:	Ja
Compatibele besturingssystemen:	Windows 98 SE, 2000, ME, XP, Vista
Hostinterface:	PCI
Maximale overdrachtssnelheid van gegevens:	100 Mbit/s
Link/Act LED:	Ja
Full duplex:	Ja
Aantal poorten:	1