Vitek VT-WAP1150 Handleiding


Bekijk gratis de handleiding van Vitek VT-WAP1150 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 5.0 sterren uit 5 reviews. Heb je een vraag over Vitek VT-WAP1150 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/2
www.vitekcctv.com
VITEK AIR SERIES HIGH SPEED 5.8GHZ
WIRELESS AP/CPE WITH POINT-TO-
MULTI-POINT (P2MP) TOPOLOGY!
With high speed transmission of 150Mbps and a wireless range
of over 3,000 feet, the VITEK VT-WAP1150 eliminates the need
for expensive and troublesome long-distance cables in areas
where CCTV monitoring and rigorous surveillance take place.
This small, lightweight and durable unit is easy-to-install and easy
to use with an innovative and straightforward 10-button plug-and-
play dip switch that facilitates the creation of a robust wireless
network without a computer. Set-up can be simply configured for
point-to-point or point-to-multipoint topology depending on the
application, with up to 128 IP group configurations.
Air Series High Speed 5.8GHz Wireless AP/CPE with
Point-to-Multi-Point (P2MP) Topology, 3,000’ Range
VT-WAP1150
Advanced Qualcomm Atheros AR9344 600MHz Chipset
64MB DDR2 Memory, 8MB Flash Storage
Low interference, High Stability, 3,000 ft. Range (1km)
Tool-free installation, with no computer necessary
Innovative and easy-to-use 10-Switch DIP function, automatically
syncs CPE and AP
Wirelessly connect up to 4 CPE points to one AP point for true
Point-to-Multi-Point (P2MP) Topology!
128 IP Groups, Automatic Matching Transmission
Compact and stylish exterior is made with durable, weather-
resistant ABS and PC Material (IP65 rating)
Wired Equivalent Privacy (WEP), SNMP Management
Information Base (MIB), Telnet, and Serial Management
Direct Sequence Spread Spectrum (DSSS) Transmission
CSMA/CA, TCP/IP, IPX/SPX, NetBEUI, DHCP, NDIS3, NDIS4,
NDIS5 Protocol
5180MHz~5240MHz / 5745MHz~5825MHz Channel
10Dbi Antenna Gain, with Vertical Polarization and 4900
6100MHz
WEP 64/128bits, WPA, WPA2, 802.1x Security Encryption
IEEE802.11a, IEEE802.11n, IEEE802.3u Standard
10/100Mbps Ethernet Port
DC12V (Power Supply Inclued in Package)
3-Year Warranty
KEY FEATURES
Sleek and compact design, with conveniently located connections,
and easy setup with DIP switch configuration (computer not required).
6.93”
3.78”2.78”
VITEK POINT-TO-MULTI-POINT (P2MP) SYSTEM
Station 1
(CPE Point)
Access Point
(AP Point)
Station 2
(CPE Point)
Station 3
(CPE Point)
Wirelessly connect up to 4 CPE points to one AP point for true Point-to-Multi-Point
(P2MP) Topology, to create a dedicated wireless security network. Optionally,
connect a modem/router to the NVR, if remote access is desired.

Beoordeel deze handleiding

5.0/5 (5 Beoordelingen)

Product specificaties

Merk: Vitek
Categorie: Niet gecategoriseerd
Model: VT-WAP1150

Heb je hulp nodig?

Als je hulp nodig hebt met Vitek VT-WAP1150 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden