Vision AV-1900 Handleiding

Vision Receiver AV-1900

Bekijk gratis de handleiding van Vision AV-1900 (3 pagina’s), behorend tot de categorie Receiver. Deze gids werd als nuttig beoordeeld door 61 mensen en kreeg gemiddeld 4.7 sterren uit 31 reviews. Heb je een vraag over Vision AV-1900 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/3

The AV-1900 is a highly capable mixer-amplier packed with useful features to make it as easy as possible to operate. It

is designed for use in demanding applications like meeting spaces, small auditoriums, lecture theatres, school halls, and

small churches. It has professional audio features normally only found in much more expensive mixer amps.

2 x 50w Mixer Amplier

AV-1900 EU SAP: 5557274

AV-1900+CS-1900 EU SAP: 5734019

AV-1900+SP-1800 EU SAP: 5734020

vav.link/av-1900

2 x 50w RMS (at 8 ohms) low impedance digital power amplier

Input 1: Line-level Stereo (2-Phono/RCA) or Mic (XLR)

Input 2: Line-level Stereo (2-Phono/RCA) or Mic (Phoenix)

Input 3: Bluetooth or Mic (Phoenix)

Input 4: Line-level Stereo (Minijack) or Mic (Phoenix)

1 x Line-level Pre-Output

Balanced Mic inputs with Phantom Power

RS-232 control

Bluetooth

For ease of connectivity it has a Bluetooth input. The device name and pin are xed and

cannot be changed. It can only pair with one device at a time. A device can be manually

unpaired by pressing the INPUT 3 dial. If you do not want Bluetooth active just set input 3 to

mic input with the switch on the rear.

Mixer Amp

This amp has four inputs, each of which can either be used for a microphone

a line-level

input. It is a true mixer amp, so it can bring together multiple sources and play them at the

same time.

Mic Pre-Amp Trim

The input gain for each mic input can be "trimmed" - adjusted on the rear panel. This allows the

installer to "turn up" less sensitive mics, and "turn down" hot inputs.

Four Microphone Inputs

All mic inputs are “balanced” to eliminate electro-magnetic noise induced on long cables. Input

1 uses a professional XLR connector - more convenient for rental and portable use, and the

other inputs use phoenix connectors - more suited to permanent installations.

Switchable Phantom Power

Each mic input has Phantom power which is a voltage required to make professional

condenser mics work. Phantom can be turned off on each input discretely.

RS-232

Designed for integration with a bigger system, it can be controlled by a control system such as

Techconnect Control via RS-232.

D-Class

An ecient Digital-class amplier chip dramatically reduces power consumption especially at

rest, and makes this amp super-small.

3 x Stereo Inputs

Three line-level stereo inputs accept input from a variety of sources such as computers (via

the headphone jack), tablets or phones. Inputs 1 and 2 use 2-phono (RCA) connectors. Input 4

is via a Minijack connector, and is duplicated on the front panel for adhoc access.

Line Output

A line-level pre-output on the rear bypasses the internal amplier. It would connect to a larger

amplier or powered loudspeakers. It is post-mix; volume adjustments made on the front

panel affects the output level.

Auto-Standby

If the amplier senses no input it will automatically go into standby mode. When it senses

input it will reactivate. Auto-standby can be disabled via RS-232.

Mounting Options

Rack ears are included so it can be integrated into an AV rack.

Product specificaties

Merk:	Vision
Categorie:	Receiver
Model:	AV-1900
Kleur van het product:	Zwart
Gewicht:	1200 g
Breedte:	283 mm
Diepte:	135 mm
Hoogte:	45 mm
Gewicht verpakking:	3000 g
Breedte verpakking:	333 mm
Diepte verpakking:	200 mm
Hoogte verpakking:	155 mm
LED-indicatoren:	Ja
Connectiviteitstechnologie:	Bedraad en draadloos
Land van herkomst:	China
Microfoon, line-in ingang:	Ja
Certificering:	RoHS, WEEE, CE/EMC, CE/LVD, RCM_SDOC, FCC_BT3.0, FCC_BT4.0, CE-RED
Bedoeld voor:	Thuis
Duurzaamheidscertificaten:	CE, RoHS
Impedantie:	8 Ohm
Audio-uitgangskanalen:	- kanalen
Frequentiebereik:	50 - 18000 Hz
Signaal/ruis-verhouding:	70 dB
Totale harmonische vervorming (THD):	10 procent
XLR in:	Ja
Regeling van bass-niveau:	Ja
AC-ingangsspanning:	100 - 240 V
Stroomverbruik (typisch):	100 W
Bedrijfstemperatuur (T-T):	0 - 40 °C
Code geharmoniseerd systeem (HS):	85184000
Input sensitiviteit:	700 mV
Treble adjustment:	Ja
Piekvermogen per kanaal:	- W
Synchronisatie ingangsimpedantie:	47000 Ohm
Versterker klasse:	D
Speakers connectiviteit type:	3.5mm / XLR / RCA
Line inputs (RCA):	2
Line outputs (RCA):	1