Vimar 01418 Handleiding

Vimar Niet gecategoriseerd 01418

Lees hieronder de đź“– handleiding in het Nederlandse voor Vimar 01418 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Viale Vicenza 14
36063 Marostica VI - Italy
www.vimar.com
01418EN 02 2003
01418
Universal phase-cut dimmer 120-240 V~ 50/60 Hz, 2 outputs for incandescent lamps
40-300 W 240 V~, 20-150 W 120 V~, electronic transformers 40-300 VA 240 V~, 20-150 VA
120 V~, CFL lamps 10-200 W 240 V~, 5-100 W 120 V~, LED lamps 3-200 W 240 V~, 3-100
W 120 V~, push buttons for local control, By-me home automation system, protection
fuse, installation on DIN rail (60715 TH35), occupies 4 modules size 17.5 mm.
2-output dimmer actuator with push buttons for manual operation. MOSFET microprocessor
technology, works in both LE (Leading Edge) and TE (Trailing edge) modes and is equipped with
protection fuse. The device receives commands directly from the bus and is able to control the
load directly.
IMPORTANT: Lamps controllable from a single output must all be the same. All controllable
loads must be declared DIMMABLE by the manufacturer. Check the type of compatible dim-
ming on the lamp packaging: LE (Leading Edge) or TE (Trailing Edge). Where not specified,
the lamp works in both modes, at the discretion of the installer; choose the type of dimming
that ensures the best lamp operation.
FEATURES.
• TP BUS Rated supply voltage: 29 V
• Network rated supply voltage: 120-240 V~, 50/60 Hz
• Dissipated power at 120 V: 12 W
• Dissipated power at 240 V: 5 W
• Absorption from TP bus: 15 mA
• Dissipated power: 5.5 W
• Terminals: N L neutral, load 1, load 2, phase, TP bus
• Parallelizable load 1 and load 2 outputs
• High breaking capacity fuse type F5AH250V
• Possible functions of the dimmer:
- lights on, lights off and light control
- absolute brightness change
- “Flash Start” mode enabling for CFL lamps
- “ramp” operation
- off delay and warning function
- phase control: LE/TE
• Protection against short-circuit on lighting with flashing-lamp blow-out detector.
• Thermal protection with flashing-lamp blow-out detector.
• Operating temperature -5 °C +45 °C (indoor)
• IP20 protection degree
• Dimmer 01418 should be configured with the Automation Gateway 01410-01411 and App
VIEW Pro.
• Not compatible with By-me control panels 21509 and EasyTool Professional.
CONTROLLABLE LOADS FOR INDIVIDUAL OUTPUT.
• Controllable loads at 120 V~
• Controllable loads at 240 V~
Dimming with leading edge
LE phase control
Dimming with trailing edge
TE phase control
N.B. The use of outputs in parallel makes it possible to control double the load specified per
each individual output but the maximum number of lamps/transformers/power supply units
that can be connected remains the same for each single output.
LOCAL CONTROLS.
Pressing the button enables the use of local buttons. All messages from the bus are ignored.
- Briefly pressing the button: Lights on control
- Briefly pressing the button: Lights off control
- Prolonged pressing of the button: Increase in brightness
- Prolonged pressing of the button: Decrease in brightness
In normal operation (that is when the commands are sent over the bus) pressing the buttons
relating to the outputs is ignored.
LED indications
• All LEDs flashing at the same time: no mains voltage.
• Push button LED on: output configured in the By-me system with ON-OFF status.
• Push button LED flashing: current or thermal protection activated for the respective output.
CONFIGURATION.
For the configuration operations, see the By-me Plus system manual.
• Enrolment: once you have created the environments, when the App prompts you to press the
device configuration push button:
- we recommend you enrol the device with the load turned off;
- press the CONF push button, the red LED is turned on;
- with the red LED turned on, the App enrols the device in the selected environment; the red
LED is turned off once the operation is complete.
• Functional units: 3 (dimmer actuator 1, dimmer actuator 2, dimmer actuator 1+2).
• Functional unit selection: from the APPLICATIONS menu, follow the instructions shown by
the App.
INSTALLATION RULES.
• -Installation must be carried out by qualified persons in compliance with the current regula
tions regarding the installation of electrical equipment in the country where the products are
installed.
• It should be used in dry, dust-free places at a temperature of between -5 °C and +45 °C.
•The lamps connected to it must all be the same.
• Not suitable for controlling motors (e.g. fans, ventilators).
• Never exceed the rated power.
• Overloads, electric arcs and short-circuits cause irreparable damage to the dimmer. Before
installation check the circuit carefully and eliminate any of the above causes.
• The dimmer does not have a mechanical 1-way switch in the main circuit and so is not galvan-
ically separated. The circuit load should be considered always powered.
•For further instructions see the manual enclosed with the control unit.
REGULATORY COMPLIANCE.
LV Directive.
EMC directive.
Standard EN 60669-2-5, EN 50491.
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead.
WEEE - User information
The crossed bin symbol on the appliance or on its packaging indicates that the product at the end of its life
must be collected separately from other waste. The user must therefore hand the equipment at the end of its
life cycle over to the appropriate municipal centres for the differentiated collection of electrical and electronic
waste. As an alternative to independent management, you can deliver the equipment you want to dispose of
free of charge to the distributor when purchasing a new appliance of an equivalent type. You can also deliver
electronic products to be disposed of that are smaller than 25 cm for free, with no obligation to purchase, to
electronics distributors with a sales area of at least 400 m2. Proper sorted waste collection for subsequent
recycling, processing and environmentally conscious disposal of the old equipment helps to prevent any
possible negative impact on the environment and human health while promoting the practice of reusing and/
or recycling materials used in manufacture.
Controllable loads LE TE
20 - 150 W 20 - 150 W
5 - 50 W 5 - 100 W (max 5 lamps) (max 10 lamps)
3 - 50 W 3 - 100 W (max 10 lamps) (max 10 lamps)
20 - 150 VA
(max 3
L
type transformers)
20 - 150 VA
(max 5
C
type transformers)
Power supply units
01874.120-01875.120
max 5 power supply units Not applicable
Lamps 02662.120
max 5 lamps Not applicable
Controllable loads LE TE
40 - 300 W 40 - 300 W
10 - 100 W 10 - 200 W (max 5 lamps) (max 10 lamps)
3 - 100 W 3 - 200 W (max 10 lamps) (max 10 lamps)
40 - 300 VA
(max 3
L
type transformers)
40 - 300 VA
(max 5
C
type transformers)
Power supply units
01874-01875
max 10 power supply units Not applicable
Lamps 02662
max 10 lamps Not applicable
Viale Vicenza 14
36063 Marostica VI - Italy
www.vimar.com
01418 02 2003
FRONT VIEW
A
C
D
E
BUS TP
N
L
B
2
1
01418
DIMMER
120 - 240V~
2x 20-150W 120V~
2x 40-300W 240V~
50/60Hz
OUT 1
OUT 2
N 2 1 L
CONF.
By-me
ID:
6A 120 - 240V~ 50/60Hz µ
BUS
C NO
A: Lights on and increase in brightness output 1
B: Lights off and decrease in brightness output 1
C: Lights on and increase in brightness output 2
B: Lights off and decrease in brightness output 2
E: Configuration push button and LED
CONNECTIONS
Connection with separate outputs. Connection with parallel outputs.
L
N
+
-Bus
2 1
01418
DIMMER
120 - 240V~
2x 20-150W 120V~
2x 40-300W 240V~
50/60Hz
OUT 1
OUT 2
N 2 1 L
CONF.
By-me
ID:
6A 120 - 240V~ 50/60Hz µ
BUS
C NO
L
N
+
-Bus
1+2
01418
DIMMER
120 - 240V~
2x 20-150W 120V~
2x 40-300W 240V~
50/60Hz
OUT 1
OUT 2
N 2 1 L
CONF.
By-me
ID:
6A 120 - 240V~ 50/60Hz µ
BUS
C NO
1.
2.
01418
DIMMER
120 - 240V~
2x 20-150W 120V~
2x 40-300W 240V~
50/60Hz
OUT 1
OUT 2
CONF.
By-me
ID:
NL
21
FUSE REPLACEMENT

Product specificaties

Merk: Vimar
Categorie: Niet gecategoriseerd
Model: 01418

Heb je hulp nodig?

Als je hulp nodig hebt met Vimar 01418 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Vimar

Vimar

Vimar ELVOX EBRA.3L Handleiding

9 Juli 2023
Vimar

Vimar ELVOX 6621 Handleiding

9 Juli 2023
Vimar

Vimar 08376 Handleiding

9 Juli 2023
Vimar

Vimar 14380 Handleiding

7 Juli 2023
Vimar

Vimar ELVOX 41215 Handleiding

4 Juli 2023
Vimar

Vimar ELVOX 1264 Handleiding

2 Juli 2023
Vimar

Vimar ELVOX EBRA.4L Handleiding

2 Juli 2023
Vimar

Vimar 19295.AC.M Handleiding

1 Juli 2023
Vimar

Vimar ELVOX 6611/AU Handleiding

1 Juli 2023
Vimar

Vimar 14172.SL Handleiding

1 Juli 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024