Victron BlueSolar PWM 12 24V-10A LCD USB Handleiding

Victron Acculader BlueSolar PWM 12 24V-10A LCD USB

Lees hieronder de 📖 handleiding in het Nederlandse voor Victron BlueSolar PWM 12 24V-10A LCD USB (61 pagina's) in de categorie Acculader. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/61
Manual
EN
Handleiding
NL
Manuel
FR
Anleitung
DE
Manual
ES
Manual
SE
IT
Appendix
BlueSolar PWM Charge Controller – LCD - USB
12V | 24V | 5A
12V | 24V | 10A
12V | 24V | 20A
1
EN NL FR DE ES SV IT Appendix
1. General Information
The BlueSolar PWM Charge Controller series uses Pulse Width Modulation (PWM)
charge voltage control combined with a multistage charge control algorithm.
2. Features
• Three stage battery charging [bulk – absorption – float]
• Battery type: Lead-acid and LiFePO4 (with internal BMS)
• Protected against over current.
• Protected against short circuit.
• Protected against reverse polarity connection of the solar panels and/or battery.
• Low voltage load disconnect.
• Temperature protection.
3. Installation
Important note: always connect the batteries first.
IMPORTANT
• Always connect the battery first, in order to allow the Controller
to recognize system voltage
• Use a 12V (36 cells) solar array for a 12V system.
• Use a 24V (72 cells) solar array for a 24V system.


Product specificaties

Merk: Victron
Categorie: Acculader
Model: BlueSolar PWM 12 24V-10A LCD USB

Heb je hulp nodig?

Als je hulp nodig hebt met Victron BlueSolar PWM 12 24V-10A LCD USB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Acculader Victron

Handleiding Acculader

Nieuwste handleidingen voor Acculader