Victrix Gambit Prime Handleiding

Bekijk gratis de handleiding van Victrix Gambit Prime (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.6 sterren uit 2 reviews. Heb je een vraag over Victrix Gambit Prime of wil je andere gebruikers van dit product iets vragen? Stel een vraag

QUICK START GUIDE

IMPORTANT

READ BEFORE USING

CERTIFICATION MODEL:

049-006

Rating: 5 VDC, 500mA

GAMBIT

PRIME

2. Programmable Back Buttons

■ To program the back buttons, hold the “function” button and press the back paddle button you’d like to

map a control to. Once the LED is flashing, press any button on the controller to map that button’s

function to the back. The LED will quickly blink 3 times, indicating successful programming.

■ To clear a mapped button, hold down the “function” button and double press any back button.

PACKAGE CONTENTS

SETUP

■

Gambit Prime Controller

■

Detachable 3m Braided USB-C Cable

■

Interchangeable Gates

■

Interchangeable D-pads

3. Trigger Stops

■ The Victrix Gambit Tournament Controller features 5 trigger stop settings.

■ To adjust the trigger stop, press and hold the purple clutch button on the back of the controller,

then press the trigger down to the desired position. To set, release the clutch button. Repeat for the

other trigger.

4. Removing the Faceplate

■ To remove the faceplate, locate the small finger indentation (above the 3.5mm audio jack) and

pull up. The faceplate is held on by magnets and should easily release.

5. Removing/Adding the Sniper Stick Gen 2

™

:

■ First, make sure the faceplate is removed.

■ To remove the analog stick, use a little force and pull the analog stick o the controller.

■ To add the Sniper Stick Gen 2

™

, line it up with the controller and gently push the stick down.

Any questions?

www.turtlebeach.com/surtppo

Pleasregister your product to receivimportanupdates.e e t

www.turtlebeach.com/productrestrationgi

For warrantyvisit:,

www.turtlebeh.com/warrantyac

6. Removing/Adding the D-pad

■ To remove a D-pad, hold it between two fingers and gently pull it o.

■ To add a D-pad, line it up with the controller and gently push down until you hear a click.

Note: If a circular D-pad is on your controller, you will need to remove that first before trying

to remove the faceplate or any other pieces.

7. Removing/Adding the Gates

■ Once again, make sure the faceplate is removed first.

■ To remove a gate, flip the faceplate over (so the back is facing you) and press firmly on the

back side of the gate with your thumb; the gate should pop out.

■ When adding a gate, first make sure the front of the faceplate is facing you. Then, line up

the four notches of the gate with the gaps and use your thumbs to push in until it clicks.

7. App

■ To customize your controller further, download the free Victrix Control Hub App from the

Windows Store on your PC or Xbox. You can use it to re-map buttons, configure custom

audio profiles, recalibrate analog sticks and triggers, run diagnostics, and much more.

7. Dolby Atmos

The Victrix Gambit Prime controller comes with a lifetime subscription for Dolby Atmos for

spatial, surround sound gaming.

■ After connecting your Gambit Prime controller to the Xbox console, there will be a popup on

the bottom of your screen informing you that Dolby Atmos is available and to hold the Xbox

button to activate in settings.

■ Follow the instructions on screen to complete the set up.

■

Interchangeable Analog Sticks

■

Interchangeable Back Paddles

■

Spare Parts Case

■

Quick Start Insert

1. Audio Settings

■ To adjust the game volume, hold down the “function” button and press Up/Down on the D-pad.

■ To adjust the game/chat balance, hold down the “function” button and press Left/Right on the D-pad.

■ Cycle through dierent audio mode profiles by holding down the “function” button and pressing LB/RB.

The LED on the “function” button will cycle between Red, Green, or Blue to indicate the profile.

■ To mute your microphone, press the “function” button twice; the LED will illuminate amber.

(1.)

Product specificaties