Victor 1460-4 Handleiding
Victor
Rekenmachine
1460-4
Lees hieronder de đ handleiding in het Nederlandse voor Victor 1460-4 (7 pagina's) in de categorie Rekenmachine. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/7
Preface
Congratulations on your choice of a Victor electronic calculator. Careful design, quality materials, painstaking
workmanship, and advanced research and production facilities have given you a calculator that, with proper care,
will provide many years of trouble-free service. To assure future protection, offered by Victorâs Extended
Guarantee Protection Program.
This operating manual describes the features and operation of the Victor 1460-4 electronic calculator. This
calculator features the four basic arithmetic operations, two independent tax keys, percentage and percentage-of-
change, change sign, sigma, item count, non-add/date functions, backspace, and cost, sell, margin keys.
Table of Contents
General Maintenance
Replacing the Ribbon
Paper Feed
Keyboard Diagrams
Key Features
Application Examples
Warranty
Extended Warranty
Preparation
BEFORE USING THE PRINTER FOR THE FIRST TIME:
Remove the tape holding the ink ribbon in place.
Before Beginning Calculation
1. Plug in AC power
2. Be sure that the paper roll and ribbon have bee installed properly.
3. Turn power switch on, and make sure that the display lights. A âCâ will automatically be printed on
the paper tape.
4. Set decimal point selector switch at the desired position.
NOTE: Please remove the piece of tape holding the printer ribbon in place for transportation.
General Maintenance
1. Do not place the calculator in hot, dusty, or damp locations.
2. To clean the housing, use a silicon-treated cloth. Do not use water or detergents.
3. Do not place anything on the housing, particularly on the head of the printer mechanism.
4. Turn off the power switch before removing the plug from AC wall outlet.
5. Turn the power switch off while not in use.
How to Feed the Paper Tape
1. Plug in the calculator and turn it on.
2. Cut or tear evenly the end of the paper roll to get a straight edge.
3. Place the paper holder into position. (Fig.
4. Install the paper roll on the paper holder.
5. Insert the paper end into the printer slot. (Fig.
6. Press the Paper Feed (â) key to feed the paper to an adequate length.
Replacing the Ribbon
Your calculator is shipped with a 2-color ribbon already in place. You do not need to install or change it before you
begin using the calculator. When you have been using your calculator for some time, however, the print will
gradually become faint, indicating that you should change the ribbon. To change the ribbon, follow these steps.
1. Remove the paper roll, tearing the paper at the rear of the calculator. Use the Paper Advance (â) key to
feed the remaining paper tape through the printer. Then remove the printer cover.
2. Remove the old ribbon by pulling it upward.
3. Install the ribbon spool with the black edge up. Roll from the outside of the full spool and place the
first spool on the spindle not engaged by the lever. Thread the new ribbon along the outside of the
guides and in front of the print wheels. Switch the lever to the other side and replace the second spool.
4. Rotate the spools to take up any slack. Replace the printer cover and the paper tape.
(Replace with the Victor #7010 Ink Ribbon)
Keyboard Layout
This section describes the mode switches, data entry keys, and operating keys provided on your calculator. The
following terms are used in discussing your calculatorâs operation:
ž The accumulator is the area of the calculatorâs logic that stores a running total of the results of addition
and subtraction operations. It is the âadding machineâ portion of the calculator.
ž The calculating register is the area of the calculatorâs logic where the intermediate and final results of
multiplication, division, and percentage calculations are stored. The contents of the calculating register do
not affect the accumulator.
ž The keyboard register is the area of the calculatorâs logic that stores the value that will immediately be
used in the next calculation.
ž The item count register is the area of the calculatorâs logic that counts your entries into the accumulator.
Each positive or negative entry is counted as one item.
ž The memory register is the area of the calculatorâs logic that accumulates amounts you add or subtract
from the memory. Because the memory register is independent of the accumulator and the calculating
register, it retains its value until you clear it with the Memory Total (MT) key.
Product specificaties
| Merk: | Victor |
| Categorie: | Rekenmachine |
| Model: | 1460-4 |
Heb je hulp nodig?
Als je hulp nodig hebt met Victor 1460-4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Rekenmachine Victor
17 Juni 2023
16 Juni 2023
15 Juni 2023
11 Juni 2023
8 Juni 2023
6 Juni 2023
5 Juni 2023
31 Mei 2023
29 Mei 2023
29 Mei 2023
Handleiding Rekenmachine
- Rekenmachine HP
- Rekenmachine Casio
- Rekenmachine Canon
- Rekenmachine Basetech
- Rekenmachine Genius
- Rekenmachine Global Tronics
- Rekenmachine GlobalTronics
- Rekenmachine Ibico
- Rekenmachine Lexibook
- Rekenmachine Rex
- Rekenmachine Sanyo
- Rekenmachine Sencor
- Rekenmachine Sharp
- Rekenmachine Sigma
- Rekenmachine Taurus
- Rekenmachine Texas
- Rekenmachine Texas Instruments
- Rekenmachine Tiger
- Rekenmachine United Office
- Rekenmachine Olivetti
- Rekenmachine Olympia
- Rekenmachine Omron
- Rekenmachine Citizen
- Rekenmachine Trevi
- Rekenmachine Genie
- Rekenmachine Aurora
- Rekenmachine Calculated Industries
- Rekenmachine Milan
- Rekenmachine Q-CONNECT
- Rekenmachine Rexel
- Rekenmachine XD Enjoy
Nieuwste handleidingen voor Rekenmachine
9 April 2024
9 April 2024
9 April 2024
9 April 2024
9 April 2024
9 April 2024
9 April 2024
9 April 2024
9 April 2024
9 April 2024