Victor 1240-3A Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Victor 1240-3A (31 pagina's) in de categorie Rekenmachine. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/31
1
1240 3A-
12 DIGIT PROFESSIONAL PRINTING CALCULATOR
CALCULATRICE IMPRIMANTE PROFESSIONNELLE À 12 CHIFFRES
CALCULADORA IMPRESORA PROFESIONAL DE 12 CIFRAS
INSTRUCTION MANUAL
MANUEL DU FONCTIONNEMENT
MANUAL DE INSTRUCCIONES
2
Preface
Congratulations on your choice of a Victor electronic calculator. Careful design, quality materials, painstaking
workmanship, and advanced research and production facilities have given you a calculator that, with proper care, will
provide many years of trouble-free service. To assure protection beyond the limited warranty, Victor offers a
Comprehensive Coverage Plan which may be purchased through the website www.victortech.com.
This operating manual describes the features and operation of the Victor 1240- electronic calculator. This 3A
calculator features the four basic arithmetic operations, Tax + and - keys, percentage, change sign, sigma, item count,
non-add/date functions, backspace, and cost, sell, margin keys.
Table of Contents
Preparation 1
General Maintenance 2
Replacing the Ribbon 2
Paper Feed 2
Keyboard Diagrams 3
Key Features 4
Application Examples 22
Warran ty
Preparation
BEFORE USING THE PRINTER FOR THE FIRST TIME:
1. Remove the tape holding the ink ribbon in place.
2. Plug in AC power
3. Be sure the paper roll and ribbon have been installed properly.
4. Turn the power switch on, and make sure the display lights up. A “C” will automatically be printed on the
paper tape.
5. Set decimal point selector switch to the desired position.
3
General Maintenance
1. Do not place the calculator in hot, dusty, or damp locations.
2. To clean the housing, use a damp cloth.
3. Do not place anything on the housing, particularly on the head of the printer mechanism.
4. Turn off the power switch before removing the plug from AC wall outlet.
5. Turn the power switch off while not in use.
How to Feed the Paper Tape
1. Plug in the calculator and turn it on.
2. Cut or tear evenly the end of the paper roll to get a straight edge.
3. 3) Place the paper holder into position. (Fig.
4. Install the paper roll on the paper holder.
5. 4) Insert the paper end into the printer slot. (Fig.
6. y to feed the paper to an adequate length. Press the Paper Feed (↑) ke
Replacing the Ribbon
Your calculator is shipped with a 2-color ribbon already in place. You do not need to install or change it before using
the calculator. When you have been using your calculator for some time, however, the print will gradually become
faint, indicating that you should change the ribbon. To change the ribbon, follow these steps.
1. Remove the paper roll, tearing the paper at the rear of the calculator. Use the Paper Advance (↑) key to
feed the remaining paper tape through the printer. Then remove the printer cover.
2. Remove the old ribbon by pulling it upward.
3. Install the ribbon spool with the black edge up. Unwind the ribbon from the full spool and place the full
spool on the left spindle. Thread the new ribbon along the outside of the guides and in front of the print
wheels. Place the second spool into position on the right side spindle.
4. Rotate the spools to take up any slack. Replace the printer cover and install the paper roll.
(Replace with the Victor #7010 Ink Ribbon)


Product specificaties

Merk: Victor
Categorie: Rekenmachine
Model: 1240-3A

Heb je hulp nodig?

Als je hulp nodig hebt met Victor 1240-3A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Rekenmachine Victor

Handleiding Rekenmachine

Nieuwste handleidingen voor Rekenmachine