Vestil HPC-40 Handleiding
Vestil
Niet gecategoriseerd
HPC-40
Bekijk gratis de handleiding van Vestil HPC-40 (9 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 5.0 sterren uit 2.5 reviews. Heb je een vraag over Vestil HPC-40 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/9
Table of Contents Rev. 3/19/2021 HPC MANUAL
Table of Contents Copyright 2021 Vestil Manufacturing Page 1 of 9
HPC-SERIES VERTICAL PLATE CLAMPS
USE AND MAINTENANCE MANUAL
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description
of it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department
can also be contacted online at https://www.vestil.com/page-parts-request.php
.
Electronic copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from
https://www.vestil.com/page-
manuals.php.
Table of Contents
Page
Specifications…………………..………………………..……………………………………………...
2
Signal Words….…………………………………………………………………………..…………..…
2
Safety Instructions……………….…………………..………………..………………..…………..…..
3 - 4
National Standards……………………………………………………………………………………...
4
Minimum Uniform Sheet Weight & Uniform Capacity………………………………………..……...
4
Capacity Varies with Sling Angle…………..…………………………………………………………………
4
Operation Parameters…………………………………………………………………………………..
5
Using the Plate Clamp.…………………………………………………….………………...…………
5, 6
Record of Satisfactory Condition………………………………………………………………………
7
Load Tests……………………………………………………………………………………………….
7
Inspections & Maintenance……………………………………………………………………….……
7, 8
Labeling Diagram……...……………………….……………………………………………..………...
8
Limited Warranty…...…………………………………………………………..…………..…………..
9
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
www.vestilmfg.com e-mail: info@vestil.com
Table of Contents Rev. 3/19/2021 HPC MANUAL
Table of Contents Copyright 2021 Vestil Manufacturing Page 2 of 9
SIGNAL WORDS
This manual uses SIGNAL WORDS to direct the reader’s attention to important safety-related messages.
These messages describe uses of the product that could result in personal injury or property damage. Each signal
word corresponds to a specific hazard level.
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS
INJURY. Use of this signal word is limited to the most extreme situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or SERIOUS
INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
Identifies practices likely to result in product/property damage, such as operation that might
damage the product.
SPECIFICATIONS
Documents that provide specifications for HPC-series plate clamps are available online to anyone who visits
Vestil’s website. Specifications include dimensions, net weight, and capacity information. To access the appropriate
specifications document, navigate to this webpage: https://www.vestil.com/product.php?FID=562
.
Click the
“Specifications” tab. Scroll the page to the entry for the model ladder you purchased, and click the button in the
“PDF” column that looks like a pencil inside a blue-bordered box. A PDF file will open. This file is the specifications
document. Print a copy of the document and keep it with your copy of this manual. The following is an exemplar
specifications document for model HPC-20.
Product specificaties
| Merk: | Vestil |
| Categorie: | Niet gecategoriseerd |
| Model: | HPC-40 |
Heb je hulp nodig?
Als je hulp nodig hebt met Vestil HPC-40 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Vestil
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
Handleiding Niet gecategoriseerd
- Nature's Truth
- Rotatrim
- Philco
- Livarno Lux
- Logic
- IDENTsmart
- Binatone
- Waeco
- Chrosziel
- KENUCO
- Paragon
- Impact
- Contemporary Research
- The Grainfather
- 2hp
Nieuwste handleidingen voor Niet gecategoriseerd
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025