Venmar V130H80RT Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Venmar V130H80RT (52 pagina's) in de categorie Airco. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 3.7 sterren beoordeeld
Pagina 1/52
USER AND INSTALLER MANUAL
INSTALLER: READ THESE INSTRUCTIONS
SAVE THEM FOR USER
RESIDENTIAL USE ONLY
23831WEB rev. W
REGISTER YOUR PRODUCT ONLINE AT:
Broan-NuTone.ca/home/customer-service/product-registration
For additional information, visit Broan-NuTone.ca
v110H65rT
**v130H65rT
**V130H80RT
v150H75NT* v150H75NS*
V160H65RT
**v160H75rT **v160H75rS
**v160H80rT
v130e65rT
v150e75NT* v150e75NS*
**v160e75rT
*Recirculation mode is not offered on these
models.
Venmar Ventilation ULC, 550 Lemire Blvd., Drummondville, Québec, Canada J2C 7W9 Broan-NuTone.ca 800-567-3855
**THeSe producTS earNed THe eNerGY
STar
®
bY meeTiNG STricT eNerGY efficieNcY
GuideliNeS SeT bY NaTural reSourceS caNada
aNd THe uS epa. THeY meeT eNerGY STar
requiremeNTS oNlY wHeN uSed iN caNada.
VB0382
Hrverv
2
Please take note that this manual uses the following symbols to emphasize particular information:
Identies an instruction which, if not followed, might cause serious personal injuries including possibility of
death.
CAUTION
Denotes an instruction which, if not followed, may severely damage the unit and/or its components.
NOTE: Indicates supplementary information needed to fully complete an instruction.
LIMITATION
For residential (domestic) installation only. Installation work and electrical wiring must be done by a qualied person in
accordance with all applicable codes and standards, including re-rated construction codes and standards.
âš WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSON(S) OBSERVE THE FOLLOWING:
1. Use this unit only in the manner intended by the manufacturer.
2. Before servicing or cleaning this unit, disconnect power cord from electrical outlet.
3. This unit is not designed to provide combustion and/or dilution air for fuel-burning appliances.
4. When cutting or drilling into a wall or ceiling, do not damage electrical wiring and other hidden utilities.
5. Do not use this unit with any solid-state speed control device other than those specied in section 3.1.
6. This unit must be grounded. The power supply cord has a 3-prong grounding plug for your personal safety. It must be
plugged into a mating 3-prong grounding receptacle, grounded in accordance with the national electrical code and local
codes and ordinances. Do not remove the ground prong. Do not use an extension cord.
7. Do not install in a cooking area or connect directly to any appliances.
8. Do not use to exhaust hazardous or explosive materials and vapors.
9. When performing installation, servicing or cleaning this unit, it is recommended to wear safety glasses and gloves.
10. When applicable local regulation comprises more restrictive installation and/or certication requirements, the
aforementioned requirements prevail on those of this document and the installer agrees to conform to these at his own
expense.
11. Do not screw the brackets, or any other hardware, into any location but the mount locations designated by the
manufacturer.
12. Make sure to secure mounting brackets in a sound structure.
CAUTION
1. To avoid prematurely clogged lters, turn the unit OFF during construction or renovation.
2. Please read specication label on product for further information and requirements.
3. Be sure to duct air outside – Do not intake/exhaust air into spaces within walls or ceiling or into attics, crawl spaces, or
garage. Do not attempt to recover the exhaust air from a dryer or a range hood.
4. Intended for residential installation only in accordance with the requirements of NFPA 90B (for a unit installed in U.S.A.)
or Part 9 of the National Building Code of Canada (for a unit installed in Canada).
5. Do not run any air ducts directly above or within 2 ft (0.61 m) of a furnace or its supply plenum, boiler, or other heat
producing appliance. If a duct has to be connected to the furnace return plenum, it must be connected 10’ (3.1 m) away
from plenum’s connection to the furnace.
6. The ductwork is intended to be installed in compliance with all applicable local and national codes.
7. When leaving the house for a long period of time (more than two weeks), a responsible person should regularly check
if the unit operates adequately.
8. If the ductwork passes through an unconditioned space (e.g.: attic), the unit must operate continuously except when
performing maintenance and/or repair. Also, the ambient temperature of the house should never drop below 18°C
(65°F).
9. At least once a year, the unit mechanical and electronic parts should be inspected by qualied service personnel.
10. Do not use your unit during construction or renovation of your house or when sanding drywall. Certain types of dust
and vapors may damage your system.
11. Make sure at all times that the outside intake and exhaust hoods are free from any snow during the winter season. It
is important to check your unit during a big snow storm, so it doesn’t draw in any snow. If this is the case, please turn
the unit OFF for a few hours.
12. Since the electronic control system of the unit uses a microprocessor, it may not operate correctly because of external
noise or very short power failure. If this happens, unplug the unit and wait approximately 10 seconds. Then, plug the
unit in again.
13. Do not make excessive use of fragrance appliances or chemicals since some may damage the unit components material.
âš WARNING
Product specificaties
| Merk: | Venmar |
| Categorie: | Airco |
| Model: | V130H80RT |
Heb je hulp nodig?
Als je hulp nodig hebt met Venmar V130H80RT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Airco Venmar
11 Juni 2025
Handleiding Airco
- Airco B-Air
- Airco JHS
- Airco Challenge
- Airco Concept
- Airco Westinghouse
- Airco OneConcept
- Airco Evapolar
- Airco Mitsubishi
- Airco CyberPower
- Airco Moa
- Airco Teco
- Airco Equator
- Airco Vox
- Airco Lavor
- Airco Cecotec
Nieuwste handleidingen voor Airco
13 Juni 2025
13 Juni 2025
12 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
10 Juni 2025