Vemer Muvy Handleiding

Bekijk gratis de handleiding van Vemer Muvy (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 15 mensen en kreeg gemiddeld 4.8 sterren uit 3 reviews. Heb je een vraag over Vemer Muvy of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1

2

COMPLEMENTS FOR CIVIL SERIES

TECHNICAL INFORMATION

MUVY CONNECTION DIAGRAMDIMENSIONS (mm)

Front viewSide viewDiagram

1Installation on ush-mounting boxes with a height of 45 mm

2Terminals on the back of the device for power supply connection

3Movement and twilight sensor

Step marker lamp with twilight sensor and movement detector that turns on in low light conditions when

people or animals move within the detection range.

Muvy is small and compact to be installed with discretion in the flush-mounting boxes and is supplied with

adapters that allow installation with the plates of the main civil series.

Step marker lamps with twilight sensor

Adaptable plates

ABB Mylos series

Ave S44 series

Bticino Axolute series

Bticino Axolute Air series

Bticino Light series

Bticino Living International series

Bticino LivingLight series (LL)

Bticino LivingLight Air series

Bticino Matix series

Gewiss Chorus series

Vimar Arké series

Vimar Eikon series

Vimar Eikon Evo series

Vimar Plana series

For information on the possibility of using dierent plates

contact the technical assistance service

GENERAL CHARACTERISTICSNOT EXTRACTABLE STEP MARKER LAMP WITH TWILIGHT SENSOR

•Light source: 1 white led

•Intervention brightness xed at 30 lux and not modiable

•Intervention time xed at 30 seconds (if a new movement is detected

during the timing, the count restarts)

•Compact size: only 1 module occupied in the ush-mounting box

•Adapters that allow adaptability with the main civil series

(see “Adaptable plates”) included in the package

CodeModelDescriptionColourPower supply

VE770600 MuvyStep marker lamp with twilight sensor and movement detectorOpal white230 V~

REFERENCE STANDARDS

Compliance with the Community Directives: 2014/35/EU (LVD) and 2014/30/EU (EMCD)

is declared in reference to the following harmonized standards: EN 60598-1 • EN 60598-2-2 • EN 61000-6-1 • EN 61000-6-3

Power supplyV AC115 ÷ 230 (-15% ÷ +10%)

Frequency 50/60Hz

AbsorptionVA (W)2.5 (0.6)

Mounting ush

Maximum cables section mm21.5

Intervention luminositylux30

Detection angle110° at 20°C

Detection range7m at 20°C

Intervention time s30

Light source

Luminous intensitylm10

Operating temperature0 ÷ 50°C

Storage temperature-20 ÷ +60°C

Operating humidity 20% ÷ 90% RH

non condensing

Protection degreeIP40

3

MUVY-ENG-072019

Product specificaties