Velleman PSS1303 Handleiding

Velleman Batterij-oplader PSS1303

Lees hieronder de 📖 handleiding in het Nederlandse voor Velleman PSS1303 (17 pagina's) in de categorie Batterij-oplader. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/17

FPS1310SM

EN FIXED SWITCHING POWER SUPPLY

NL VASTE SCHAKELENDE VOEDING

ALIMENTATION FIXE À DÉCOUPAGE

FUENTE DE ALIMENTACIÓN CONMUTADA CON TENSIÓN DE

SALIDA FIJA

DE NETZGERÄT - FESTSPANNUNG - SCHALTNETZTEIL

PT FONTE DE ALIMENTAÇÃO FIXA

PL ZASILACZ PRADU STALEGO - MODEL IMPULSOWY

USER MANUAL 2

GEBRUIKERSHANDLEIDING 4

MODE D'EMPLOI 6

MANUAL DEL USUARIO 8

BEDIENUNGSANLEITUNG 10

MANUAL DO UTILIZADOR 12

,16758.&-$2%6à8*, 14

FPS1310SM

V. 01 – 01/09/2014 2 ©Velleman nv

USER MANUAL

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could

harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it

should be taken to a specialized company for recycling. This device should be returned to your

distributor or to a local recycling service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If

the device was damaged in transit, don't install or use it and contact your dealer.

2. Safety Instructions

Keep this device away from children and unauthorized users.

Indoor use only. Keep this device away from rain, moisture, splashing and dripping liquids.

Never put objects filled with liquids on top of or close to the device.

DO NOT disassemble or open the cover under any circumstances. Touching live wires can cause

life-threatening electroshocks. There are no user-serviceable parts inside the device. Refer to an

authorized dealer for service and/or spare parts.

Always connect the device to an earthed power socket.

Caution: device heats up during use. Make sure the ventilation openings are clear at all times.

For sufficient air circulation, leave at least 1” (± 2.5 cm) in front of the openings. Place the

device on a flat, heat resistant surface, do not place the device on carpets, fabrics…

Always disconnect mains power when device not in use or when servicing or maintenance

activities are performed. Handle the power cord by the plug only.

Keep this device away from dust and extreme temperatures.

Protect this device from shocks and abuse. Avoid brute force when operating the device.

Do not use the device when damage to housing or cables is noticed. Do not attempt to service

the device yourself but contact an authorised dealer.

Do not use this power supply with devices requiring an input current greater than 10 A.

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

xFamiliarise yourself with the functions of the device before actually using it.

xAll modifications of the device are forbidden for safety reasons. Damage caused by user modifications to

the device is not covered by the warranty.

xOnly use the device for its intended purpose. Using the device in an unauthorised way will void the

warranty.

xDamage caused by disregard of certain guidelines in this manual is not covered by the warranty and the

dealer will not accept responsibility for any ensuing defects or problems.

xKeep this manual for future reference.

4. Operation

1. Insert the AC power plug in a 230 VAC / 50 Hz outlet.

2. Connect the power cord of a device with the appropriate input voltage to the output binding posts on the

front panel. The red positive (+) terminal and black negative (-) terminal are indicated on the front panel.

Mind the polarity: reversal of polarity may damage the device.

3. Put the ON/OFF switch on the front panel in the "ON"-position. The light in the switch will come on.

4. The 230V-input is protected by the fuse, which is located at the back of the device. Replace a blown fuse

with an identical one.

10 A

FPS1310SM

V. 01 – 01/09/2014 3 ©Velleman nv

5. This device is protected against brief short circuits and equipped with an automatic reset function.

5. Cleaning and Maintenance

xDisconnect the device from the mains prior to maintenance activities.

xThe power supply cables must not show any damage. Have a qualified technician maintain the device.

xWipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.

xThere are no user-serviceable parts, apart from the fuse. Contact your dealer for spare parts if necessary.

xStore the device in a dry, well-ventilated, dust-free room.

6. Technical Specifications

input voltage 230 V 50 Hz

output voltage 13.8 V max.

output current

ripple voltage =/< 100 mVp-p

dimensions 155 × 115 × 255 mm

weight 1.614 kg

fuse T2

Use this device with original accessories only. Velleman nv cannot be held responsible in the event

of damage or injury resulting from (incorrect) use of this device.

For more info concerning this product and the latest version of this manual, please visit our website

www.velleman.eu.

The information in this manual is subject to change without prior notice.

The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this

manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the

prior written consent of the copyright holder.

Product specificaties

Merk:	Velleman
Categorie:	Batterij-oplader
Model:	PSS1303

Heb je hulp nodig?

Als je hulp nodig hebt met Velleman PSS1303 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Batterij-oplader Velleman

Velleman PSS1303 Handleiding

9 Juli 2023

Velleman LABPS3005N Handleiding

5 Juli 2023

Velleman FPS1320 Handleiding

4 Juli 2023

Velleman LBPS3005DN Handleiding

3 Juli 2023

Velleman LBPS3060SM Handleiding

2 Juli 2023

Velleman LBPS23023 Handleiding

2 Juli 2023

Velleman LBPSHH01 Handleiding

2 Juli 2023

Velleman LBPS3005 Handleiding

1 Juli 2023

Velleman LBPS6030SM Handleiding

1 Juli 2023

Velleman PS3020 Handleiding

1 Juli 2023

Handleiding Batterij-oplader

Nieuwste handleidingen voor Batterij-oplader

Sven C-123 Handleiding

26 April 2024

Sven C-127 Handleiding

26 April 2024

Sven C-103 Handleiding

25 April 2024

Ctek READY AUTOMOTIVE Handleiding

25 April 2024

Hoymiles HMT-1800-6T Handleiding

17 April 2024

Hoymiles HMT-2250-6T Handleiding

17 April 2024

SolaX Power X3-MEGA G2 Handleiding

16 April 2024

Monacor PSS-5000 Handleiding

16 April 2024

Manhattan 102612 Handleiding

12 April 2024

Ozito PXBP-400U Handleiding

10 April 2024