Vango F10 Helium UL Air Handleiding

Bekijk gratis de handleiding van Vango F10 Helium UL Air (2 pagina’s), behorend tot de categorie Tent. Deze gids werd als nuttig beoordeeld door 18 mensen en kreeg gemiddeld 4.8 sterren uit 7 reviews. Heb je een vraag over Vango F10 Helium UL Air of wil je andere gebruikers van dit product iets vragen? Stel een vraag

B.

PITCHING

C.

Vango makes every effort to ensure the accuracy of our information. We do however have a policy of continuous improvement

and we therefore reserve the right to change or amend colours and specifications without prior notice. ©AMG Group Ltd.

Helium UL Air

NL - Deze tent moet

worden omgeven door

minstens 1 personen

IT - Questa tenda

deve essere eretto da

almeno 1 persone

FR - Cette tente doit

être érigée par au

moins 1 personnes

DE - Dieses Zelt sollte

von mindestens zwei

Personen aufgestellt

werden

CZ - Tento stan by

měl být postaven

nejméně 1 osoby

EN - This tent should

be erected by at least

1 people

3

x10

A.

Top up pressure to 6 PSI using

bike pump via Schrader valve.

v. Close door & close zip clip

Peg out using larger pegs for

main peg points 2 at shorter

end, one on central guy at

lower end.

iv.

i.

ii.iii.

i. Insert carbon upright into

pocket on outside of flysheet.

ii. Loosely peg out flysheet.

The pumping action for using

the pump sack:

i. Extend tent bag to double length.

ii. Attach tent bag/ pump sack

end valve to large valve on tube

and inflate tent bag by blowing

into it from a distance.

iii. Compress tent bag as shown.

The pumpsack can be used to inflate the beam quickly using the method described below. Do not inflate

directly with your mouth, moisture from breath can speed the degradation of the TPU inner coating.

The pumpsack can only inflate to a low pressure & a bike pump should be used to get to a firm 6 PSI.

6

i.

ii.

Product specificaties