V-Tac VT-89016 Handleiding

Bekijk gratis de handleiding van V-Tac VT-89016 (2 pagina’s), behorend tot de categorie Lamp. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.6 sterren uit 3 reviews. Heb je een vraag over V-Tac VT-89016 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

TECHNICAL DATA

MODEL

SKU

WATTS

LUMENS

BEAM ANGLE

CCT

MATERIAL

IP RATING

BASE SIZE

DIMENSION

INPUT POWER

VT-89016

24122

6W

720Lm

280°

3000K

Steel+Aluminum+Acrylic

IP20

D120xH30mm

W120xH147xE211mm

AC: 220-240V, 50Hz

MULTI-LANGUAGE

MANUAL QR CODE

Please scan the QR code

to access the manual in

multiple languages.

Replaceable control gear

by a professional

WARNING

LED WALL LAMP

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT:

[email protected] FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR

OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

INSTRUCTION MANUAL

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instruc-

tions carefully before starting the installing and keep this manual handy for future reference. If you have any

another query, please contact our dealer or local vendor from whom you have purchased the product. They

are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase.

The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The

company gives no warranty against damage to any surface due to incorrect removal and installation of the

product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day

would void the warranty. This product is warranted for manufacturing defects only.

1.Please make sure to turn o the power before starting the installation.

2.Installation must be performed by a qualified electrician.

3.The light source of this luminaire is not replaceable; when the light

source reaches its end of life the whole luminaire shall be replaced.

4.Proper grounding should be ensured throughout the installation.

5.For Indoor Use only

Product specificaties