Uni-T LM320F Handleiding

Bekijk gratis de handleiding van Uni-T LM320F (1 pagina’s), behorend tot de categorie Meetapparatuur. Deze gids werd als nuttig beoordeeld door 21 mensen en kreeg gemiddeld 4.0 sterren uit 3 reviews. Heb je een vraag over Uni-T LM320F of wil je andere gebruikers van dit product iets vragen? Stel een vraag

5

10

9

Enter the Relative

Value mode

Relative Value

mode

Absolute Value

mode

User Manual

Angle Meter

LM320D/LM320E/LM320F

PREFACE

Tk y for purchasi t w Ale Meter. In order tohanoungheneng

use

this product safely and correctly, please read this manual

thoroughly.

After reading this manual, it is recommended to keep the manual

at an easily accessible place, preferably close to the device, for

future referce. en

LIITMED WARRANTY AND LIABYILIT

Uni-

Trend guarantees that the product is free from any defect in

material and workmanship within one year from the purchase date.

This warranty does not apply to damages caused by accident,

negligence,misuse,modification,contamination and improper

handling. The dealer shall not be entitled to give any other

warranty on

behalf of Uni-

Trend. If you need warranty service

within the warranty period, please contact authorized service

center or send the product back with problem description.This

warranty is the only compensation you can obtain.Uni-

Trend will

not be

responsible for any special,indirect, incidental or subsequent

damage or loss caused by any reason or speculation. As some areas

or countries do not allow imitations on implied warranties and

incidental or subsequent damage, the above limitation oliity andf abli

stipulati may t plyo y. onnoap tou

1

Product Structure

1

2

Laser ON/OFF Buttonnly LM320E, LM0F) (o32

3

-/+ Display Ic

on

4

5

Absolute/Relative Value Switch

6

Angle Displ ay

Absolute / Relative Value Display

Unit Switch/Sd ON/OFF oun

Battery Display

Mute Icon

Dataold Display -H

7

8

9

10

11

Angle Direction lcon

(in/ft,mm/m,%,°)Unit Switch

2

9

10

11

POWER/Data Lock Button

Laer(ons Emiion Hole ssly LM320320ELM, F)

Type-i PtC Chargngor

buonontt to power .

buonpott to wer off.

In wer-po

on state, short pre ss

Operatis:on

Power Onn wer-: Ipo

off statel, ong press

Power Ofn wer-f: Ipo

on, ong statel press

La320ser ON/O(LMFF E)

button to make all lasers on,

buongatt ain, t he

button again to make the laser off on the right

buagtton ain to make all lasers

off.

In wer-on po

state, short pre ss

laser on the left side is off,

La320ser ON/O(LMFF F)

button to make all lasers on,

button again, thlaser on the left side is off, e

buaghetton ain to make t

laser off on the top

buonaghett ain to make t laseofon r f

the righsidet

; ttSrt press hobuonaga ino make a lasers o. tllff

andho srt press

si. Short pressde

and t short press hen

andho srt press

side. Srt press ho

and th srt press enho

3

Left-sided laser of

LM320E/LM320F

Right-sided laser of

LM320E/LM320F

Top-sided laser of

LM320F

Angle Murementeas

In werpo-on state, place the device on the inclined plane,

screen is the angle value betweent show val the heueon

the inclined pl t riztal ple.aneandhehoonan

RE(Relative Val M): F ueode

In the measurement mode, short press button to enter

(Set the current value to 0), and

the Relative Val me ueod

shorpress it ino exi mo.t aga tt thede

fire 2). gu

Cabration Meliod

Place the device on the absolute horizon, continuously

long

the to zero calibration (seeigure 3).au fRotate the device 90

Rotate the device 90 drees, press egbutton and

CAL1

scre, srt press mode (see fire 1); CAL0 flashes on the enhogu

t calibration recover use ois aer wer-.he, and thef ftpoon

calibration (see figure 5).Thecfirm to ter the auto zero onen

srt press hobutton to confirm to enter

flass on the rhesc

een;

buheeentton and CAL2flass on the rsc; drees, press eg

srt press ho

button to confirm to enter

the auto zero calibration

drees, presseg(see figure 4).Rotate the device 90button

short press button toand CAL3 flass on the r; hesceen

three times to ter the self -en

calibration

press tt for buon

buononenhett to cfirm to ter t auto zero cabration (s liee

4

6

button to lock the

Data ckLo

In msuremt modeshorpre theeaen, t ss

currmeasurdata; srt pre aino lockhe ta.ent ed hossga tun tda

Figure 1

Figure 4Figure 5

Figure 2

Figure 3

Data-Lock lcon

7

Charge

LM320D

Unit Switch

When low battery icon shows on the screen, please charge

the device with charging cable in the accessories. In the power-off

state, battery is fully charged when its icon stops flashing and not

showed on the screen any more.

LM320E/LM320F

Unit Switch

Sound Indication

ON/OFF

Unit Switch & Sound ONFF/O

within ‘measured value -1/8 ~ measured value’;when+’icon

shows, the range of measured value is within‘measured value ~

For LMDshorpress IT to switchhe unit.320, t UNbuontt t

For LME/LMF320320, shobuourt press ttono makehe s t tnd

For LM320E/LM320F, long press button to switch the unit

mm/m,%, or in/n in it display, wft.I/ftunhen(in ° unit by flt),deau

‘-‘icon shows on the screen, the range of

measured value is

measur value+1/8’.For example, 11.7/8 display means 11ed

and 7/8; 9/8 display means 9 and 3/8. -3

LMDsrt press 320, hobutton to make

iicati /of For ndononf;

t snd iication/o. heoundon ff

8

Type-C Charging Interface

Mlsode

Teccahnil Parameters

LMD320LME320LMF320

Reang

Msmt eaureen

4*°4*9090

°4*°90

Resoluti ±0.°on05±0.°05±0.°05

±0.2°Ale Aacyngccur±0.2°±0.2°

±0.2°Rtty ±0.2°epeaabili±0.2°

N Laernenes Lis2 lis3 sline

Ale; Pcent; Metric stem of /m; British system of in/ft.ngerageysmm

N

Laers Aacyccur±3/5mmm

Mtic BaseagneTwo- Two-si mtic Fr-si mticsi mticdedagnededagneoudedagne

Relative/Absolute

Ale ng

Msmteaureen

Ale Hold ng

Sc Rotationreen

Pow OffNo tis in 5 mites. eroperaonnu

Matialser

Al-aoy frame +ABS ll

Pow Slyerupp

3.7V 1000mAh lithium battery

Unit

Cautions:

CLASS 2 CONSUMER LASER PRODUCT

Model: LM320E

Resolution: 0.05°

IEC 60825-1:2014

EN 60825-1:2014/A11:2021

EN 50689:2021

Consumer Laser Product

Name: Angle Meter

Magnetic Base: Two-Sided

Measurement Range: 4×90° Accuracy: ±0.2°

Batery:3.7V 1000mAh

Maximum Output Power:1mW＜

Wavelength: 630nm~670nm

Laser Lines:2

Model: LM320F

Resolution: 0.05°

IEC 60825-1:2014

EN 60825-1:2014/A11:2021

EN 50689:2021

Consumer Laser Product

Name: Angle Meter

Magnetic Base: Four-Sided

Measurement Range: 4×90° Accuracy: ±0.2°

Batery:3.7V 1000mAh

Maximum Output Power:1mW＜

Wavelength: 630nm~670nm

Laser Lines:3

LM320E

LM320F

Working

0~ + 50℃℃

N

Class 2

N 630-nm, <1mW670

14h 8h6h

Size

83.5*70*35.5mm

Temperature

Laser Class

Laser Life

Battery Life

Package

Angle Meter*1, Type-C Cable*1, Gift Box*1, User Mal*1 anu

Compliance with lEC/EN 60825-1, EN 50689.

DO NOT STARE INTO BEAM

LASER RADIATION

3.r power saving, the device will be auto power off if no operations Fo

2.Do not damage the surface of device; use soft cloth towipe the dust

in 5 minutes.

for its accuracy.

1.Do not use organic solvents to wash the percision equipmet. Take

it far away from water and corrosives.

The manual is subject to changge without prior notice!

Due to different batches, the materials and details of actual products

may be slightly different from the graphic information, please refer to

the actual product received. Experimental data provided in the page

is from internal laboratory of UNI-T, but it should not be a reference

for customer to place orders. Any questions, please contact thecustomer

service, thanks!

P/N:110401113327X

Product specificaties