Uline Shrinkfast H-1302 Handleiding

Bekijk gratis de handleiding van Uline Shrinkfast H-1302 (6 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.5 sterren uit 3 reviews. Heb je een vraag over Uline Shrinkfast H-1302 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PAGE 1 OF 6 0524 IH-1302

H-1302, H-1303

1-800-295-5510

uline.com

SHRINKFAST™

998 EXTENSION

1. Remove combustor

assembly from the H-950

heat gun by depressing

the #31 button and using

a twisting motion.

(See Figure 1)

2. Attach combustor to

end of the extension

and confirm it is locked

in place. The #31 button

should protrude from the

hole in the combuster

when locked.

(See Figure 2)

3. Assemble the remainder

of the tool into the open

end of the extension

tube. Confirm it is locked

in place by ensuring the

#31 button protrudes

from the extension tube.

(See Figure 3)

4. If any of the O-rings are damaged, replace them

before using the tool.

ASSEMBLY

OPERATION

1. When operating the extension, the front trigger

needs to be depressed slightly to allow the gas

mixture to feed through the tube to the combustor

before igniting the unit. Normally, three to five

seconds will be sufficient for this feeding procedure.

NOTE: It is sometimes beneficial to point the

end of the extension down during the feeding

cycle to allow the gas mixture to collect in the

combustion area.

2. Operation at this point can proceed as normal.

3. Upon completion and normal shutdown, the tool

needs to be allowed a five-second time frame

to vent the gases in the tube. Ensure the heated

end of the H-950 gun is properly placed in a

non-combustible and safe place.

4. When shrinking film on boats or any other fuel-driven

vehicles, all fuel vents must be covered during the

shrinking process. Uncover when complete.

Figure 1

Figure 2

Figure 3

Para Español, vea páginas 3-4.

Pour le français, consulter les pages 5-6.

Product specificaties