Uline H-7097 Handleiding

Bekijk gratis de handleiding van Uline H-7097 (15 pagina’s), behorend tot de categorie Ventilator. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.5 sterren uit 6 reviews. Heb je een vraag over Uline H-7097 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PAGE 1 OF 15 1225 IH-7096

H-7096, H-7097

HEAVY-DUTY WALL MOUNT

FAN – STATIONARY

1-800-295-5510

uline.com

SAFETY

PARTS

CAUTION! Read all instructions carefully before

attempting to assemble, install, operate or

service the product. Failure to comply with

instructions could result in personal injury

and/or property damage. Using this product

for any other purpose than it was intended, or

not within the operating specifications in these

instructions will void the warranty and may cause

damage to the fan or serious injury to personnel.

WARNING! To reduce risk of fire, electric shock or

personal injury:

• This fan is intended for general use only. Do not

use near hazardous or explosive materials or

vapors.

• Before operating this fan, check for worn,

damaged or missing parts and replace or

repair as needed.

• Disconnect from power source before

servicing.

• Never insert fingers or any other objects

through the guards when fan is in operation.

• Never operate fan without guards in place.

• Certain fans have guards that are not OSHA

compliant. These units are designed to

be intrinsically safe; however, never allow

children near fan when in operation. Uline

recommends these fans be installed greater

than 7' from the ground.

• Unplug the fan before moving from one

location to another.

• Fan must be located in an area that allows for

adequate airflow around the fan. Starving the

fan of air may cause motor to overheat and

trigger the unit to shut off.

• Fan motor is thermally protected and will shut

off if overheated. Turn unit off and allow motor

to cool before restarting.

• Carefully read all safety messages in these

instructions and on equipment safety labels.

• Warning labels must be kept in good condition

and be replaced if necessary.

• Follow recommended precautions and safe

operating practices.

• Suitable for damp locations; GFCI is required.

Para Español, vea páginas 6-10.

Pour le français, consulter les pages 11-15.

7/16" Wrench (2)

9/16" Wrench (2)

3/8" Nyloc Nut x 1

Swivel

Tab x 1

Wall Mount x 1Fan Head x 1

3/8"-16 x 1⁄" Bolt x 1

TOOLS NEEDED

3/8" Nut x 1

1/4" Nut x 1

3/8" Bolt x 1

1/4" Washer x 2

3/8" Washer x 2

3/8" Washer x 21/4" Bolt x 1

Fan Head HardwareWall Mount Hardware

Product specificaties