Uline H-5781 Handleiding

Bekijk gratis de handleiding van Uline H-5781 (6 pagina’s), behorend tot de categorie Airco. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.1 sterren uit 8 reviews. Heb je een vraag over Uline H-5781 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PAGE 1 OF 6 0423 IH-5781

H-5781, H-5782

AIR CURTAIN

1-800-295-5510

uline.com

Para Español, vea página 3.

Pour le français, consulter la page 5.

WARNING! Always disconnect, lock and tag

power source before installing or servicing.

Failure to do so can result in fire, shock or

serious injury.

WARNING! Installation work and electrical

wiring must be done by qualified person(s) in

accordance with all applicable codes and

standards, including fire-rated construction.

WARNING! To reduce the risk of fire or electrical

shock, do not use this fan with any solid-state

speed control device.

WARNING! Repair and maintenance operations

can only be performed by qualified personnel.

WARNING! Verify that the rated voltage and

frequency of the air curtain is in compliance

with the mains supply. Refer to the rating label

for information.

NOTE: Minimum mounting height is 8.2' (2.5 m).

NOTE: Install the unit on a sturdy supporting

structure that will resist vibration.

NOTE: Units are intended for INDOOR USE ONLY.

Install the unit on the inside of the doorway or

opening.

NOTE: Do not install the unit where it might

come in contact with water, excessive steam,

explosive gas or corrosive gas.

NOTE: For entrances wider than the unit, it is

recommended to install two or more units in

parallel. Leave a gap of 3/4 to 1½".

1. Unscrew the mounting plate and remove it from the

back of the main body. (See Figure 1)

2. Use the mounting plate to determine the mounting

location. Fix mounting plate to wall using

appropriate fasteners for the mounting surface.

(Fasteners not included.)

3. Mount the main body onto the mounting plate and

attach with screws. (See Figure 2)

INSTALLATION

Mounting Plate

Main Body

Mounting Plate

Figure 1

Figure 2

Product specificaties