Uline H-12590 Handleiding
Pagina's 12 Kast
Bekijk de handleiding van Uline H-12590 gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag
PAGE 1 OF 12 0226 IH-12590
1-800-295-5510
uline.com
DELUXE STORAGE
CABINET
H-12590
CAUTION! Some parts may have sharp
edges. Take care when handling various
pieces to avoid injury. For safety, wear
work gloves when assembling.
Para Español, vea páginas 5-8.
Pour le français, consulter les pages 9-12.
TOOL NEEDED
Phillips Screwdriver
Rubber Mallet
(optional)
Two Person
Assembly Required
PARTS
6
5
9
8
7
1
3
13
11
1
10
12
2
4
14
HARDWARE
ST6.3 x 12 mm
Screw x 16
ST6.3 x 16 mm
Screw x 12
PRIMARY ASSEMBLY
#DESCRIPTIONQTY.
1Top/Bottom Panel2
21Left Side Panel
3Right Side Panel1
41Left Back Panel
5Right Back Panel1
61Door Frame
71Left Door
8Right Door1
91Bottom Shelf
10Shelf4
11Base Front Panel1
12Base Left Leg1
13Base Right Leg1
14Leveling Foot4
PAGE 2 OF 12 0226 IH-12590
CABINET ASSEMBLY
1. Attach left and right base legs to the bottom panel.
Secure in place using 12 ST6.3 x 16 mm screws.
Screw the leveling feet to the left and right base legs
by hand. Perform an initial test to ensure the feet
and base are level. (See Figures 1-2)
2. Place the back panels on a protected surface.
Secure side panels to back panels using precut
slots and hooks. Shift the panels vertically to secure
connection. Ensure the shelf supports and louvers
on all panels point upward. (See Figure 3)
3. Attach the top and bottom panels to the side and
back panels. The top and bottom should lock into
place over the raised bumps. (See Figure 4)
4. Using two people, lift the door and frame assembly.
Set the door and frame assembly on top of the
cabinet panels. Secure using 16 ST6.3 x 12 mm screws.
(See Figure 5)
NOTE: Stepping inside of the cabinet can
help to reach all connection points.
NOTE: Do not lift cabinet until all screws
are secure.
NOTE: Use a rubber mallet if needed to tap into
place.
Figure 3
Back
Panel
Side
Panel
Hook
Slot
Figure 1
Bottom Panel
Base Leg
ST6.3 x 16 mm Screw
Figure 2
Leveling Foot
Figure 4
Bottom
Panel
Top
Panel
Figure 5
Door and Frame
Assembly
ST6.3 x 12 mm
Screw
PAGE 3 OF 12 0226 IH-12590
CABINET ASSEMBLY CONTINUED
5. Using two people, set unit upright.
6. Insert the bottom shelf first. Tilt the shelf upward
slightly so that the back edge connects with the
long flanges on the cabinets back panels.
(See Figure 6)
NOTE: Do not connect the bottom shelf to
the standard louvers that other shelves use.
Connect to long flanges.
NOTE: Be careful of the exposed screws at the
bottom of the cabinet.
7. Insert shelves. Ensure each shelf fits into louvers on
all panels. (See Figure 7)
NOTE: To ease shelf installation, have second
person apply slight pressure to back panels
from behind the cabinet while other person
installs shelves.
8. Push base front panel into place. Remove base front
panel when moving cabinet with a forklift or pallet
truck. (See Figure 8)
9. Adjust leveling feet underneath the cabinet to
ensure the cabinet is level.
DOOR HINGE ADJUSTMENT
NOTE: Hinge adjustment should only be done
after attempting to level doors using leveling
feet on the bottom of the cabinets.
NOTE: Carefully track which hinges you adjust
and how you adjust them in case you want to
reverse any changes.
NOTE: Only adjust hinges in small increments.
Only adjust one or two hinges at a time.
1. Remove the cap. (See Figure 9)
Figure 8
Base Front Panel
Figure 9
Cap
Figure 7
Shelf Louver
Figure 6
Long
Flange
Bottom
Shelf
Product specificaties
| Merk: | Uline |
| Categorie: | Kast |
| Model: | H-12590 |
Heb je hulp nodig?
Als je hulp nodig hebt met Uline H-12590 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden