Turtle Beach Afterglow Wave Wireless Handleiding
Pagina's 1 Muis
Bekijk de handleiding van Turtle Beach Afterglow Wave Wireless gratis online of download de PDF. Deze handleiding is 2 keer bekeken. Vraag over dit model? Stel een vraag
QUICK START GUIDE
IMPORTANT
READ BEFORE USING
SETUP
1.Pairing the Controller
2. Re-connecting the Controller
A.Turn on your Nintendo Switch™ 2 device and press any button on the controller.
B.If your controller does not automatically connect, it will need to be paired with the device.
C.Using the Joy-Con™ controllers, navigate to Controllers > Change Grip/Order.
D.Now, using your controller, press and hold the sync button (at the top of the controller by the
charging port) for 3 seconds until it pairs and the player indicator light at the bottom is solid.
A.If the controller is not connecting with the device, but has already been paired, simply go into
Controllers > Change Grip/Order.
B.When prompted, press L and R on your controller to connect.
3. Charging the Controller
A.When the controller is low on battery, the “function” button’s LED (located at the bottom
center of the controller) will blink RED every 30 seconds.
B.Using the included USB-C cable, connect the controller to one of the USB ports on the
Nintendo Switch™ 2 dock.
C.While charging, the “function” button’s LED will pulse RED. When the controller is fully
charged, the LED will turn WHITE.
4. Programming the Back Buttons
Tip: To unpair the controller from the Nintendo Switch™ 2, hold down the sync button (located at
the top of the controller) for at least 1 second.
Tip: You can also press and hold the “Home” button to wake up the controller and
Nintendo Switch™ 2 device.
Note: To prevent the controller battery from completely draining out, please charge the controller
every 3 months even if it’s not in use.
Any questions?
www.turtlebeach.com/surtppo
Pleasregister your product to receivimportanupdates.e e t
www.turtlebeach.com/productrestrationgi
For warrantyvisit:,
www.turtlebeh.com/warrantyac
AFTERGLOW
™
WAVE
WIRELESS
CERTIFICATION MODEL:
CWBB0028
A
B
A.To program the back buttons, hold the “function” button and press the button you’d like to
map a control to. Once the LED is lashing, press any button on the controller to map that
button’s function to the back. The LED will blink quickly 3 times, indicating
successful programming.
B.To clear a mapped function or disable the back buttons completely, hold down the “function”
button and double press any back button.
Orig. Arena#: XXX-XXX-XXX-XXX
New Arena #: XXX-XXX-XXX-XXX RA <(designer name)
Date / Initiator: XX-XX-XX / Mtg
1. XXX
Designer:Edward Reyes
Product:AFTERGLOW WAVE WIRELESS
TBC-8106-05
Project:QSG
Date: 09 / 25 / 2025
Arena :#
Scale: 100%
Please do not print this layer!!!
· 100% actual size
· Refer to video on how to fold
PKG DESIGN DEPT
COMMENTS
SPECIFICATIONS
BLK + WHT
Printing information
QSG Paper Weight (80g)
Foldout
Folding Line
CHANGES
5. Light Modes
A.The Afterglow™ Wave Wireless Controller comes with four lighting eects pre-programmed on
the controller:
▪Wave: Displays a rainbow of RGB lights in a continuous motion.
▪Breathing: The RGB lights slowly fade in and out on a set color.
▪Static: The RGB lights will remain solid and set to a chosen color.
▪Stick: The RGB will react to the movement of the analog sticks.
B. To cycle through these lighting eects, hold down the “function” button and press either the L or
R button. Once you choose your mode, release the “function” button to save the setting.
6. Adjusting the Colors of the Lights
A.Hold down the “function” button and use the Left/Right button on the D-pad to change
the LED’s color.
B.Once you find the color you’d like, save the setting by releasing the “function” button.
C.For white, hold down the “function” button and click in the left analog stick.
7. Adjusting the Brightness of the Lights
A.To adjust the brightness, hold down the “function” button and press the ZR button to
increase brightness, and ZL to decrease it.
B.To turn o the lights completely, hold down the “function” button and press the ZL button
until it cycles to 0% brightness
Note: The default LED color for the STICK, STATIC and BREATHING modes is blue. The LED
colors for the WAVE and STICK modes cannot be customized.
PLATFORM COMPATIBILITY:
NINTENDO SWITCH™ 2
NINTENDO SWITCH™
NINTENDO SWITCH™ OLED
NINTENDO SWITCH™ LITE
Product specificaties
| Merk: | Turtle Beach |
| Categorie: | Muis |
| Model: | Afterglow Wave Wireless |
Heb je hulp nodig?
Als je hulp nodig hebt met Turtle Beach Afterglow Wave Wireless stel dan hieronder een vraag en andere gebruikers zullen je antwoorden