Tripp Lite T040-001-DP Handleiding

Tripp Lite Kabels voor pc's en randapparatuur T040-001-DP

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite T040-001-DP (32 pagina's) in de categorie Kabels voor pc's en randapparatuur. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/32

Owner’s Manual

DisplayPort/Mini

DisplayPort Cable Tester

Model: T040-001-DP

Espanol 9 • Français 17 • Русский 25

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

04-226-933798.indb 1 4/30/2018 3:39:37 PM

Package Contents

Product Features

• Master Unit

• Remote Unit

• Carrying Case

• Owner’s Manual

• All-in-one unit combines a Main Tester with a removable Remote Identiﬁer

• Compatible with DisplayPort versions 1.0 through 1.4

• Fast and accurate veriﬁcation of DisplayPort and Mini DisplayPort cables

• Displays 19 pin-to-pin wire map and shield connection status to ensure

mapping continuity and proper conﬁguration

• Two adjustable test modes available: Continuity and Sweep

04-226-933798.indb 2 4/30/2018 3:39:37 PM

Operation

Notes:

• Before testing, insert a 9V battery (not included) and ensure the cable being tested

is not yet connected to the tester.

• Do not test live cables or any cable connected to an active device. Cables should be

directly connected to the Master Unit, and then to the Remote Unit.

Testing

Simply connect the desired cable to the unit, then switch the Sweep/OFF/

Continuity button to “Continuity” for sync testing, or “Sweep” for step-by-

step testing.

Note: During sync testing, all LEDs illuminate on the wire map at once. During step-by-

step testing, the LEDs will illuminate one at a time.

When testing uninstalled patch cable, you can leave the Main Tester and

Remote Identiﬁer connected.

When testing installed cable, you will need to remove the Remote

Identiﬁer from the Main Tester. Connect one end of the cable to the

appropriate connector on the Main Tester, and the other end of the cable to

the appropriate connector on the Remote Identiﬁer.

Note: Upon switching to the desired testing mode, the LEDs on the Main Tester and

Remote Identiﬁer will illuminate to indicate the results.

If testing DisplayPort-to-DisplayPort cables, use “A pin” side numbers

found on both the Main Tester and Remote Identiﬁer. For DisplayPort-to-Mini

DisplayPort and Mini DisplayPort-to-Mini DisplayPort cables, use “C pin” side

numbers found on both the Main Tester and Remote Identiﬁer.

04-226-933798.indb 3 4/30/2018 3:39:37 PM

Product specificaties

Merk:	Tripp Lite
Categorie:	Kabels voor pc's en randapparatuur
Model:	T040-001-DP
Kleur van het product:	Zwart
Ingebouwd display:	Nee
Gewicht verpakking:	160 g
Breedte verpakking:	150.1 mm
Diepte verpakking:	119.9 mm
Hoogte verpakking:	41.9 mm
Gebruikershandleiding:	Ja
Land van herkomst:	China
Duurzaamheidscertificaten:	RoHS
Opbergetui:	Ja
Gebruiksvriendelijk:	Ja
Soort kabel:	DisplayPort
(Buitenste) hoofdverpakking hoogte:	130 mm
(Buitenste) hoofdverpakking breedte:	480.1 mm
(Buitenste) hoofdverpakking brutogewicht:	1620 g
(Buitenste) hoofdverpakking lengte:	199.9 mm
Hoeveelheid per (buitenste) hoofdverpakking:	10 stuk(s)
GTIN (EAN/UPC)-nummer (buitenste) hoofdverpakking:	10037332206449
Testtype:	Kortsluitingstesten