Tripp Lite SRCOOLNET2LX Handleiding

Tripp Lite Niet gecategoriseerd SRCOOLNET2LX

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite SRCOOLNET2LX (40 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/40

Installation and

Quick Start Guide

SNMP/Web Management Accessory

Model: SRCOOLNET2LX

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Read this guide carefully before installation. A separate downloadable User’s

Guide can be found by going to www.tripplite.com/support and typing

SRCOOLNET2LX in the search field. Refer to the User's Guide for additional

information about configuration and operation.

Installation 2

Features 10

Tech Support 12

Warranty 12

Product Registration and 13

Regulatory Compliance

Español 14

Français 27

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

18-06-379-93387E.indb 1 7/26/2018 4:19:58 PM

The SRCOOLNET2LX allows a user to communicate with and control Tripp Lite’s

SRCOOL2KWM, SRCOOL7KRM, SRCOOL18K, SRCOOL24K (pre-installed in unit) spot

coolers, and compatible SRCOOL33K row-based cooler as manageable devices on a

network accessible via Web browser, network management station, telnet, SSH or

command line.

1 - Preparation

1-1 Confirm Package Contents: In addition to this manual, your package should

include the following:

• Micro-USB cable for remote temperature sensing and configuration

(part number: 73176E), 12 ft.

• EnviroSense2 E2MT Sensor Module

• E2MT User Manual

1-2 Locate MAC Address: The 12-digit MAC address (000667xxxxxx) is located on

the SRCOOLNET2LX.

Installation

2 – Installation

2-1 Insert the SRCOOLNET2LX into the front SNMP accessory slot on the

SRCOOL2KWM/7KWM/18K/24K spot coolers or compatible SRCOOL33K

row-based cooler (Figure 1 in section 4-2).

2-2 Connect SRCOOLNET2LX to Network: Connect a standard Ethernet patch

cable to the RJ45 Ethernet port on the SRCOOLNET2LX.

Note: This port does not support PoE (Power over Ethernet) applications.

2-3 Determine Network Installation Method: If your network's DHCP server will

assign a dynamic IP address to the SRCOOLNET2LX automatically, proceed to

3 - Dynamic IP Address Assignment. If you will assign a static IP address to

the SRCOOLNET2LX manually, proceed to . If 4 - Static IP Address Assignment

you are uncertain which method to use, contact your network administrator for

assistance before continuing the installation process.

18-06-379-93387E.indb 2 7/26/2018 4:19:58 PM

Installation

3 - Dynamic IP Address Assignment

3-1 Connect SRCOOLNET2LX to Network: By default, the SRCOOLNET2LX will

attempt to obtain an IP address via DHCP. This may take as long as several

minutes, depending on your network environment.

3-2 Discover IP Address: To identify the IP address assigned to the

SRCOOLNET2LX, contact your network administrator and provide the MAC

address of the SRCOOLNET2LX. You can also determine the IP address locally at

the card. If you do not already have the serial over USB driver installed on your

PC, you can download it from www.tripplite.com/support by typing

SRCOOLNET2LX in the search field. Select the driver named “TL-cdc”. To install,

follow the instructions provided with the driver.

Once the driver is installed and the COM port has been assigned, start a

terminal emulation program, such as Tera Term Pro. Configure it to use the

assigned COM port and use the following serial port settings: 115.2Kbps, 8,

NONE, 1. Connect the USB cable to the PC and the Micro-USB end to the

Micro-USB port on the SRCOOLNET2LX. When the login prompt appears, login as

localadmin / localadmin. When the Menu appears, navigate to "3- Network

Configuration", then to "1- IP Configuration". The assigned IP address will be

displayed. After you have determined the IP address, proceed to section 5 - Test

and Configure.

Notes:

• Usernames and passwords are case sensitive.

• You may wish to request a long-term lease period for the IP address, depending on your

application.

• PowerAlert® Device Manager and the WEBCARDLX support both IPv4 and IPv6. The card

is set up by default to receive a DHCP address for IPv4, IPv6 or both. Receiving both

addresses allows connection to the card via either the IPv4 or IPv6 address.

18-06-379-93387E.indb 3 7/26/2018 4:19:58 PM

Product specificaties

Merk:	Tripp Lite
Categorie:	Niet gecategoriseerd
Model:	SRCOOLNET2LX
Gewicht:	320 g
Breedte:	76.2 mm
Diepte:	147.3 mm
Hoogte:	57.9 mm
Gewicht verpakking:	330 g
Breedte verpakking:	165.1 mm
Diepte verpakking:	176 mm
Hoogte verpakking:	57.9 mm
Gebruikershandleiding:	Ja
LED-indicatoren:	Ja
Meegeleverde kabels:	Micro-USB
Land van herkomst:	Taiwan
Duurzaamheidscertificaten:	RoHS
Intern:	Ja
(Buitenste) hoofdverpakking hoogte:	311.9 mm
(Buitenste) hoofdverpakking breedte:	174 mm
(Buitenste) hoofdverpakking brutogewicht:	1840 g
(Buitenste) hoofdverpakking lengte:	182.9 mm
Hoeveelheid per (buitenste) hoofdverpakking:	5 stuk(s)
Code geharmoniseerd systeem (HS):	8471.80.9000
GTIN (EAN/UPC)-nummer (buitenste) hoofdverpakking:	10037332231236
Output interface:	RJ-45, USB 2.0