Tripp Lite SmartRack SRWB12210STR10 Handleiding

Tripp Lite Niet gecategoriseerd SmartRack SRWB12210STR10

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite SmartRack SRWB12210STR10 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Installation Guide
Wire Basket Cable Trays
Models:
SRWB6210STR
(AC8AFB)
SRWB12210STR
(AC8AFC)
SRWB6410STR
(AC8AFD)
SRWB12410STR
(AC8AFE)
SRWB18410STR
(AC8AFF)
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed during the installation and use of all
Tripp Lite Wire Mesh Cable Tray systems. Failure to heed these warnings may affect your warranty.
Installation should only be performed by a qualified installer and in accordance with all national and local electrical and
building codes.
Always wear eye protection when cutting basket tray wire sections.
Cut edges may be sharp. Exercise caution when handling trimmed basket tray during fabrication and installation.
Español 3 • Français 5 • Русский 7
19-07-393-9339DD.indb 1 10/18/2019 11:30:29 AM
2
Preparation and Fabrication
Wire Tray Models and Dimensions
Before proceeding with fabrication, first confirm your wire tray model and dimensions.
Model Sectional View Height Width Depth
SRWB6210STR 2 in. (50 mm) 6 in. (150 mm) 10 ft. (3000 mm)
SRWB12210STR 2 in. (50 mm) 12 in. (300 mm) 10 ft. (3000 mm)
SRWB6410STR
4 in. (100 mm) 6 in. (150 mm) 10 ft. (3000 mm)
SRWB12410STR
4 in. (100 mm) 12 in. (300 mm) 10 ft. (3000 mm)
SRWB18410STR
4 in. (100 mm) 18 in. (450 mm) 10 ft. (3000 mm)
How to Cut Wire Trays
Notes:
Always use side-action bolt cutters.
Angle all cuts away from the new end.
Cut each wire with one clean cut whenever possible.
Remove any sharp edges to eliminate possible damage to cables.
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Cut the bottom wires first with the underside of the tray
facing up in the order as shown:
To cut the side wires, flip the wire tray over and cut in the
order shown, starting from the top:
Repeat as needed. For various wire cutting patterns and installation diagrams, refer to the documentation included with the
connectors and connector kits (sold separately).
19-07-393 93-39DD_RevA
1
2
4
3
5
6
1
2
4
3
1
2
4
3
19-07-393-9339DD.indb 2 10/18/2019 11:30:29 AM
Guía de Instalación
Bandejas para Cables de Canastilla de Alambre
Modelos:
SRWB6210STR
(AC8AFB)
SRWB12210STR
(AC8AFC)
SRWB6410STR
(AC8AFD)
SRWB12410STR
(AC8AFE)
SRWB18410STR
(AC8AFF)
1111 W. 35th Street, Chicago, IL 60609 EE. UU. • En la dirección de correo electrónico tripplite.com/support
Copyright © 2019 Tripp Lite. Todos los derechos reservados.
Instrucciones de Seguridad Importantes
GUARDE ESTAS INSTRUCCIONES
Este manual contiene instrucciones y advertencias que deben seguirse durante la instalación y uso de todos los
sistemas de Bandeja para Cables de Malla de Alambre de Tripp Lite. Hacer caso omiso a estas advertencias
puede afectar su garantía.
La instalación debe ser realizada únicamente por un instalador calificado y de conformidad con todos los códigos eléctricos
y de construcción locales.
Siempre use protección para los ojos al cortar secciones de la bandeja de canastilla de alambre.
Los bordes cortados pueden estar afilados. Tenga cuidado al manipular bandejas de canastilla recortadas durante la
fabricación e instalación.
English 1 • Français 5 • Русский 7
S DE
AÑOS
19-07-393-9339DD.indb 3 10/18/2019 11:30:29 AM


Product specificaties

Merk: Tripp Lite
Categorie: Niet gecategoriseerd
Model: SmartRack SRWB12210STR10

Heb je hulp nodig?

Als je hulp nodig hebt met Tripp Lite SmartRack SRWB12210STR10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Tripp Lite

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd