Tripp Lite SmartRack SR42UBEIS Handleiding

Tripp Lite Niet gecategoriseerd SmartRack SR42UBEIS

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite SmartRack SR42UBEIS (36 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36

SmartRack® Rack Enclosure

with IP54 (NEMA 12) Rating

Model: SR42UBEIS

Owner’s Manual

Important Safety Instructions 2

Overview 2

Feature Identification 3

Enclosure Installation 4

Preparation 4

Unpacking 4

Placement 5

Leveling 6

Ground Connection 6

AC Power Connection 6

Enclosure Configuration 7

Adding or Removing Front and Rear Doors 7

Adding or Removing Roof Panel 7

Adding or Removing Side Panels 8

Adjusting Mounting Rails and 8

Cable Management Rails

Combining (Baying) Enclosures 9

Cleaning/Replacing Filters 10

Installing the Cable Access Housing (Optional) 10

Equipment Installation 11

Installing or Removing Cage Nuts 11

Specifications 12

Storage and Service 12

Warranty and Product Registration 12

Español 13

Français 25

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

Important Safety Instructions

SAVE THESE INSTRUCTIONS

All sections of this manual contain instructions and warnings that should be followed during the installation and use of the SmartRack Enclosures

described in this manual. Read all instructions and warnings thoroughly before attempting to move, install or use the SmartRack Enclosures

described in this manual. Failure to comply will create a risk of personal injury and property damage and may affect the warranty.

• Keep the enclosure in a controlled indoor environment, away from temperature extremes, flammable liquids and gasses, conductive contaminants

and direct sunlight.

• Leave adequate space at the front and rear of the enclosure for proper ventilation. Do not block, cover or insert objects into the external ventilation

openings of the enclosure.

• The enclosure is extremely heavy. Use caution when handling the enclosure. Do not attempt to unpack, move or install it unassisted. Use a

mechanical device such as a forklift or pallet jack to move the enclosure in the shipping container.

• Do not place any object on the enclosure, especially containers of liquid, and do not attempt to stack the enclosures.

• Inspect the shipping container and the enclosure for shipping damage. Do not use the enclosure if it is damaged.

• Leave the enclosure in the shipping container until it has been moved as close to the final installation location as possible. The casters are designed

for minor position adjustments within the final installation area only. The casters are not designed for moving the enclosure over longer distances.

• Install the enclosure in a structurally sound area with a level floor that is able to bear the weight of the enclosure, all equipment that will be installed

in the enclosure and any other enclosures and/or equipment that will be installed nearby.

• Do not push the enclosure from the side panels to move it. Pushing from the side panels will cause a tipping hazard.

• When rolling the enclosure on its casters, always push it from behind, never pull it toward you.

• A rolling enclosure can cause personal injury and property damage if not properly supervised. If rolling the enclosure down a ramp is required, use

extreme caution. Do not attempt to use ramps that have a slope steeper than 1:12.

• Use caution when cutting packing materials. The enclosure could be scratched, causing damage not covered by the warranty.

• Save all packing materials for later use. Repacking and shipping the enclosure without the original packing materials may cause product damage

that will void the warranty.

• Do not re-ship the enclosure with additional equipment unless the enclosure was shipped with a special shock pallet (“SP1” and “SP2” models

only). The combined weight of the enclosure and installed equipment must not exceed the load capacity of the pallet. Tripp Lite is not responsible

for any damage that occurs during re-shipment.

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support

equipment or to significantly affect its safety or effectiveness is not recommended.

Overview

SmartRack Enclosures accommodate all standard 19-inch rackmount equipment, regardless of vendor, and ship fully assembled for quick and easy

deployment. They feature adaptable heavy duty cabinets with variable mounting depths, making them ideal for servers. Integrated baying hardware

enables cost-effective, orderly and efficient expansion. The cabinets include quick release doors and side panels for convenient maintenance. Front

and rear doors and side panels are lockable.

The SR42UBEIS has a IP54 (NEMA 12) rating, and is designed to be dust-protected and drip and splash resistant. It features louvered front and rear

doors with sealing gaskets and dust filters. The doors seal tightly and may require pushing on the top or bottom of the doors to set them properly. The

rear door is equipped with 12 ventilation fans in 3 individually powered fan panels, ensuring constant airflow. An optional dust- and drip-resistant cable