Tripp Lite Protect It! TLP606DMUSB Handleiding

Tripp Lite Niet gecategoriseerd Protect It! TLP606DMUSB

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite Protect It! TLP606DMUSB (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

Protect It!® Surge

Suppressors with

Dedicated USB Charging Ports

Models: TLP606USB, TLP606DMUSB

1111 W. 35th Street Chicago, IL 60609 USA • www.tripplite.com/support

® is a registered trademark of Tripp Lite.

Owner’s Manual

WARRANTY

REGISTRATION:

to win a FREE Tripp Lite product—

www.tripplite.com/warranty

Installation 2

Lifetime Limited Warranty 3

Ultimate Lifetime Insurance Policy 4

Warranty Registration 3

Important Safety Instructions 2

13-05-274 93-32C0-EN.indd 1 6/14/2013 9:50:49 AM

SAVE THESE INSTRUCTIONS

CAUTION! DO NOT connect to an ungrounded outlet. DO NOT use with 2-wire extension cords or

adapters. This surge suppressor is designed for indoor use only. Install the surge suppressor away

from heat-emitting appliances such as radiators or heat registers. Do not install where excessive

moisture is present. Do not plug extension cords into it. Never install electrical, telephone, network

or coaxial wiring during a lightning storm. Do not drill into any part of the housing or open the

housing for any reason. There are no user-serviceable parts inside.

Important Safety Instructions

• Use of this equipment in life support applications where failure of this equipment can reasonably

be expected to cause the failure of the life support equipment or to significantly affect its safety

or effectiveness is not recommended. Do not use this equipment in the presence of a

flammable anesthetic mixture with air, oxygen or nitrous oxide.

Installation

Mount Your Surge Suppressor

(Optional Installation, TLP606USB Only): If desired, mount your surge suppressor on a wall

or other sturdy, vertical surface. However, you must mount the surge suppressor prior to

connecting your equipment. Place a sheet of paper over the surge suppressor’s mounting holes

and mark their centers with a push pin. Next, place this template over the desired area and mark

with the push pins. Install screws (user supplied) into the marks until ¼ in. (0.6 cm) of the screw

heads are exposed. Mount the surge suppressor over the screw heads and slide into place.

(Installation, TLP606DMUSB

Only): This suppressor features a

built-in clamping system for

attaching the unit to desks,

tables and work benches. To

install, loosen the two mounting

clamps, then slide the suppressor

firmly onto the edge of an

appropriate surface. Retighten

the mounting clamps.

Connect Your Surge Suppressor to

the AC Power Line: Plug the surge

suppressor’s power cord into a

standard, 3-wire grounded 120V AC

outlet.

Turn Your Surge Suppressor ON:

Press the surge suppressor’s power

switch to “ON” or “RESET” (depending

on model). Select models feature an

illuminated switch.

Installation, TLP606DMUSB Only

13-05-274 93-32C0-EN.indd 2 6/14/2013 9:50:49 AM

Installation continued

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and

workmanship for its lifetime. If the product should prove defective in material or workmanship within that period, Seller will repair

or replace the product, in its sole discretion. Service under this Warranty can only be obtained by your delivering or shipping the

product (with all shipping or delivery charges prepaid) to: Tripp Lite, 1111 W. 35th St., Chicago, IL 60609. Seller will pay return

shipping charges.

The warranties of all TRIPP LITE surge suppressors are null and void if they have been connected to the output of any UPS system.

The warranties of all TRIPP LITE UPS Systems are null and void if a surge suppressor has been connected to its output receptacles.

THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT.

SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT

PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS,

ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL

INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and

some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions

may not apply to you. This Warranty gives you specific legal rights, and you may have other rights which vary from jurisdiction to

jurisdiction.)

WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the

use intended. Since individual applications are subject to great variation, the manufacturer makes no representation or warranty

as to the suitability or fitness of these devices for any specific application.

The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice.

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series

number. The series number can be found on the product nameplate label, along with all required approval markings and

information. When requesting compliance information for this product, always refer to the series number. The series number should

not be confused with the marketing name or model number of the product.

Lifetime Limited Warranty

Warranty Registration

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be automatically entered into

a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Check Your Surge Suppressor’s Diagnostic Indicator Lights: If your surge suppressor features

diagnostic LEDs, check them prior to connecting your equipment. They will indicate various

operating conditions when the surge suppressor is plugged into a live 120V AC outlet and the

surge suppressor’s power switch is on.

“PROTECTED” LED: Indicates the surge suppression components are intact and providing

complete protection against surges. If this LED does not illuminate, some of the surge suppression

components are not functioning, and the unit should be replaced. Visit www.tripplite.com/support.

“GROUNDED” LED: Indicates wall outlet is grounded and surge protection can properly

function. If this light DOES NOT illuminate and power is present, consult a qualified electrician

to examine your outlet’s wiring.

Connect Your Equipment to the Surge Suppressor’s AC Outlets: Plug your equipment’s power

cords (including 2-wire devices) into the surge suppressor’s AC outlets. Models feature special

widely-spaced outlets to accommodate transformers without covering other outlets. DO NOT plug

in extension cords. DO NOT OVERLOAD the surge suppressor’s outlets. The surge suppressor can

accommodate a total equipment load of up to 15 amps (whether plugged into a single outlet or

spread out over multiple outlets). If the load on the surge suppressor exceeds 15 amps, the circuit

breaker will trip and the outlets will stop providing power. If the circuit breaker trips, reduce the

load by unplugging some devices.

USB Charging Ports: Two USB charging ports are capable of delivering up to 2.1 A total. This will

provide enough power to charge the most demanding devices, including smartphones, tablets and

MP3 players.

Note: The charging ports are controlled by the master power switch on the unit.

13-05-274 93-32C0-EN.indd 3 6/14/2013 9:50:49 AM

Product specificaties

Merk:	Tripp Lite
Categorie:	Niet gecategoriseerd
Model:	Protect It! TLP606DMUSB
Kleur van het product:	Zwart
Gewicht:	680 g
Breedte:	345.4 mm
Diepte:	72.9 mm
Hoogte:	73.4 mm
Snoerlengte:	1.83 m
Gewicht verpakking:	820 g
Breedte verpakking:	142.2 mm
Diepte verpakking:	419.1 mm
Hoogte verpakking:	76.2 mm
Aan/uitschakelaar:	Ja
Land van herkomst:	China
Certificering:	UL1449 3rd EDITION, UL1363, cUL
Materiaal:	Kunststof
Responstijd:	1 ms
Duurzaamheidscertificaten:	RoHS
Uitgangsvermogen:	1875 watts
Draadloos:	Nee
Stekker:	NEMA 1–15P
Afstandsbediening inbegrepen:	Nee
(Buitenste) hoofdverpakking hoogte:	457.2 mm
(Buitenste) hoofdverpakking breedte:	355.6 mm
(Buitenste) hoofdverpakking brutogewicht:	9890 g
(Buitenste) hoofdverpakking lengte:	431.8 mm
Hoeveelheid per (buitenste) hoofdverpakking:	12 stuk(s)
AC-ingangsfrequentie:	50 - 60 Hz
GTIN (EAN/UPC)-nummer (buitenste) hoofdverpakking:	10037332180299
Surge energy rating:	2100 J
Aantal AC uitgangen:	6 AC-uitgang(en)
Nominale input voltage:	120 V
Stopcontacttypes:	NEMA 5–15P